-
Sikaflex 11 FC + Polyurethane Adhesive and Sealant - WhiteVendor:
Sikaflex-11 FC+ is a one-component polyurethane adhesive and joint sealant for internal and external building work. Designed for flexible, non-structural bonding and sealing, it combines adhesion to compatible construction materials with ±35% movement capability in correctly designed joints. Multipurpose bonding and joint sealing Use...- From $277.80
- From $277.80
- Unit price
- per
-
White
-
Concrete Grey
-
Black
-
Sikadur®-31 CF NormalVendor:
Structural epoxy bonding and concrete edge repairs demand an adhesive that stays where it is applied. Sikadur®-31 CF Normal is Sika’s two-component, moisture-tolerant epoxy adhesive and repair mortar for rigid bonding, patching and filling on suitable construction substrates. Its thick, non-sag consistency makes it...
- From $259.34
- From $259.34
- Unit price
- per
-
Sikadur®-33Vendor:
When a fixing or concrete repair needs a rigid, fast-curing epoxy paste, Sikadur®-33 provides a practical alternative to slow-setting bonding systems. This two-component structural adhesive is formulated for anchoring and fixing applications, localised concrete repairs and sealing non-moving cracks where its smooth, non-sag consistency...
- From $193.98
- From $193.98
- Unit price
- per
-
Sikadur®-32 LPVendor:
Bonding fresh concrete to existing concrete is as much about timing and surface preparation as it is about adhesive strength. Sikadur®-32 LP is a two-component epoxy bonding agent with an extended working life, suited to specified construction and concrete repair work in warmer conditions....
- From $231.10
- From $231.10
- Unit price
- per
-
Sikaflex®-221 - WhiteVendor:
One flexible sealant can cover a wide range of straightforward joints and bonding tasks—provided the substrates are suitable. Sikaflex®-221 is a one-component polyurethane adhesive sealant used for permanent elastic sealing and light bonding in vehicle, equipment and general fabrication work.Elastic sealing across mixed materialsSikaflex-221...
- $30.26
- $30.26
- Unit price
- per
-
White
-
Sikaflex®-291 - BlackVendor:
Boat interiors need joints that can flex with vibration and movement. Sikaflex®-291 is Sika’s multipurpose polyurethane adhesive sealant for marine construction and fit-out work, designed to create elastic seals rather than rigid bonds. It is a practical choice for suitable interior joints and general...
- From $31.20
- From $31.20
- Unit price
- per
-
Black
-
White
-
Aluminium Grey
-
Sikaflex®-295 UV - WhiteVendor:
Bonding plastic glazing into a boat calls for a different sealant from general marine joint sealing. Sikaflex®-295 UV is a moisture-curing polyurethane adhesive developed for marine organic glazing, including suitable acrylic (PMMA) and polycarbonate windows, where weather exposure and substrate compatibility are critical.Marine windows,...
- $38.88
- $38.88
- Unit price
- per
-
White
-
Sikaflex Pro Polyurethane Sealant 600ml Sausages - WhiteVendor:
Sikaflex PRO is a one-component, moisture-curing polyurethane sealant for movement and connection joints in concrete and masonry façades. Its ±25% movement capability helps maintain an elastic seal as building joints expand and contract. Supplied in 600ml sausages for use with a compatible foil-pack sealant...
- From $16.48
- From $16.48
- Unit price
- per
-
White
-
Off White
-
Sandstone
-
Japan Beige
-
Sikaflex Pro Polyurethane Sealant 300ml Cartridges - WhiteVendor:
Sikaflex PRO Cartridges is a one-component polyurethane joint sealant for concrete and masonry movement joints, façade connections and general building weatherseals. This cartridge format is used with a compatible sealant gun and provides ±25% movement capability and an elastic seal after moisture curing. Movement...
- From $241.80
- From $241.80
- Unit price
- per
-
White
-
Sandstone
-
Japan Beige
-
Grey
-
Sikaflex Construction AP+ Polyurethane Sealant - WhiteVendor:
Sikaflex Construction AP+ is a one-component, non-sag polyurethane sealant for movement and connection joints in concrete, masonry and other compatible building materials. It accommodates ±25% joint movement to ASTM C 719 and is suited to internal and external façade and building-joint sealing. Where to...
- $311.80
- $311.80
- Unit price
- per
-
White
-
Concrete Grey
-
Black
-
Sikaflex® PRO-3 Purform®Vendor:
Floor joints in warehouses, car parks and industrial facilities have to tolerate more than occasional movement. Sikaflex® PRO-3 Purform® is a one-component elastic polyurethane sealant for specified floor and civil-engineering joints exposed to mechanical wear, traffic and demanding service conditions.For trafficable and industrial joint...
- $31.70
- $31.70
- Unit price
- per
-
SikaHyflex®-250 FacadeVendor:
Facade movement joints need a sealant that can stretch without placing excessive stress on the surrounding building materials. SikaHyflex®-250 Facade is a low-modulus, moisture-curing elastic sealant for weatherproofing approved movement and connection joints in building envelopes.Concrete, masonry and facade jointsIts low-modulus formulation suits specified...
- $23.13
- $23.13
- Unit price
- per
-
Sikaflex®-400 FireVendor:
A fire-rated joint is a tested assembly, not simply a bead of sealant. Sikaflex®-400 Fire is a one-component polyurethane sealant used in specified fire-resistant movement and connection joints where the complete construction detail meets the relevant tested configuration.Fire-rated building jointsUse this grey sealant for...
- $24.09
- $24.09
- Unit price
- per
-
SikaSeal® Kitchen and Bathroom - BeigeVendor:
Wet-area joints need a flexible seal that stands up to repeated splashing and everyday cleaning. SikaSeal® Kitchen and Bathroom is a neutral-curing, low-odour silicone for suitable joints around showers, basins, baths, splashbacks and other kitchen and bathroom fixtures.Finish tiled and sanitary joints neatlyThe sealant...
- $13.08
- $13.08
- Unit price
- per
-
Beige
-
Brown
-
SikaSeal® Roof & Gutter - TranslucentVendor:
Roof and gutter joints are exposed to movement, rain and changing temperatures. SikaSeal® Roof & Gutter is a neutral-curing silicone sealant for approved roof sheeting, gutters, penetrations and other exterior construction joints where a durable, flexible waterproof seal is required.Seal roof details and gutter...
- $12.22
- $12.22
- Unit price
- per
-
Translucent
-
Sikasil®-702 - WhiteVendor:
For everyday construction joints, a neutral-cure silicone can offer broad substrate compatibility without the corrosion concerns associated with some other cure chemistries. Sikasil®-702 is Sika's premium, one-component 100% silicone sealant for suitable internal and external sealing work.One silicone for a range of building detailsUse...
- $10.97
- $10.97
- Unit price
- per
-
White
-
Alabaster
-
Sikasil Pool Silicone Sealant - GreyVendor:
Sikasil Pool is a neutral-cure silicone sealant for swimming-pool joints, permanently immersed joints and frequently wet areas. It accommodates ±25% joint movement and is formulated to resist water, pool chemicals and fungal growth when pool water is maintained correctly.Pool and wet-area jointsUse Sikasil Pool...
- From $312.00
- From $312.00
- Unit price
- per
-
Grey
-
White
-
Transparent
-
SikaSeal® Appliance Sealant - BlackVendor:
Appliance sealing often calls for a flexible gasket material rather than an ordinary bathroom silicone. SikaSeal® Appliance Sealant is a one-component RTV silicone rubber for suitable appliance joints, flexible gasketing and gap filling where temperature variation and vibration matter.For appliance gaskets and sealing detailsIts...
- $17.93
- $17.93
- Unit price
- per
-
Black
-
Sikaflex®-290 DC PROVendor:
Caulk exposed timber marine deck seams with a flexible, weather-resistant sealant that can be sanded to the finished deck. Sikaflex®-290 DC PRO is a black, one-component moisture-curing polyurethane compound designed specifically for joints in traditional teak and other suitable timber decking on boats, yachts...
- $0.00
- $0.00
- Unit price
- per
-
Sika Primer-3 N Epoxy PrimerVendor:
Sika Primer-3 N is a single-component, solvent-based epoxy primer that helps compatible Sika sealants and adhesives bond to porous construction substrates and selected metals. Use it where the specified Sikaflex, SikaHyflex, SikaBond, Sikasil or SikaSeal system requires this primer.Priming concrete and metal jointsSika Primer-3...
- From $71.45
$0.00- From $71.45
- Unit price
- per
-
Sika® Primer-210Vendor:
Durable polyurethane bonding begins with the correct surface pretreatment. Sika® Primer-210 is a colourless to slightly yellow, solvent-based epoxy primer that improves adhesion between many prepared metal surfaces and specified one-component Sika polyurethane adhesives.Prepare metals for industrial and marine bondingThe moisture-reactive primer forms a...
- $60.40
- $60.40
- Unit price
- per
-
Sika® Aktivator PROVendor:
Replacement automotive glazing needs consistent glass pretreatment in both workshop and mobile conditions. Sika® Aktivator PRO is a clear, solvent-based adhesion promoter developed for black-primerless glass bonding with compatible Sika automotive glazing adhesive systems.Single-wipe preparation for automotive glassThe single-wipe process simplifies bonding-surface preparation and...
- From $30.03
- From $30.03
- Unit price
- per
-
Sikalastic®-1KVendor:
Sikalastic-1K is a one-component, fibre-reinforced flexible cementitious waterproofing mortar for concrete protection and wet-area waterproofing. Mix with water and apply by brush, trowel or suitable spray equipment over correctly prepared mineral substrates.Waterproofing on concrete and masonryUse Sikalastic-1K for bathrooms and showers beneath tiles, balconies...
- $213.07
- $213.07
- Unit price
- per
-
Sika SikaSwell S-2Vendor:
SikaSwell S-2 is a water-swelling polyurethane sealant for sealing non-moving concrete construction joints and penetrations. It expands when exposed to water and can also be used to fix SikaSwell A and P waterstop profiles to prepared concrete before casting. Construction joint waterstopping Use SikaSwell...
- $2,076.80
- $2,076.80
- Unit price
- per
-
Sika® Drain-500 GeoVendor:
Below-ground waterproofing systems need both protection against backfill and a path for water to drain away. Sika® Drain-500 Geo combines a dimpled high-density polyethylene (HDPE) sheet with an integrated geotextile filtration layer, creating a drainage space alongside basement walls and other below-ground structures.Drainage and...
- $1,100.18
- $1,100.18
- Unit price
- per
-
Sikagard®-705 LVendor:
Reduce water and chloride penetration into exposed concrete while retaining water-vapour permeability. Sikagard®-705 L is a ready-to-use, low-viscosity silane impregnation containing 99% active ingredient. It penetrates absorbent concrete and suitable cementitious substrates rather than forming a surface membrane.Hydrophobic protection for marine and civil concreteSuited...
- $2,276.70
- $2,276.70
- Unit price
- per
-
SikaTop® Armatec®-110 EpoCem®Vendor:
When a concrete repair exposes reinforcing steel, the repair mortar is only one part of the system. SikaTop® Armatec®-110 EpoCem® is a three-component epoxy-cementitious coating used to protect correctly prepared reinforcement and, where specified, form a bonding bridge beneath compatible concrete repair mortars.Protect the...
- $468.09
- $468.09
- Unit price
- per
-
Sika MonoTop® FCVendor:
Small surface defects can spoil the finish of otherwise sound concrete. Sika MonoTop® FC is a fine, polymer-modified cementitious fairing mortar for filling shallow blowholes, minor honeycombing and surface imperfections before a compatible coating or finished concrete presentation.Fine finishing rather than bulk repairUse MonoTop...
- $80.35
- $80.35
- Unit price
- per
-
Sikagard®-720 EpoCem®Vendor:
Fine concrete surface defects need a finishing mortar that can level pores and prepare the surface for subsequent protection. Sikagard®-720 EpoCem® is a three-part epoxy-modified cementitious mortar for smoothing concrete, filling pores and repairing minor surface imperfections. It can also act as a temporary...
- $373.38
- $373.38
- Unit price
- per
-
Sikagard®-63 NVendor:
Concrete and steel exposed to aggressive chemicals require more than a standard decorative coating. Sikagard®-63 N is a two-part novolac epoxy protective coating designed to provide a high-build, liquid-impervious barrier on prepared concrete, cementitious and metal substrates in specified chemical-exposure environments.For bunds, tanks and...
- $1,267.50
- $1,267.50
- Unit price
- per
-
SikaGrout® HES 20kgVendor:
SikaGrout HES is a rapid-setting, high-early-strength cementitious grout for supporting equipment and structural elements where an early return to service matters. This ready-mixed Class C shrinkage-compensated grout can be mixed to a flowable or trowellable consistency for appropriately prepared concrete and steel interfaces. Where...
- $69.95
- $69.95
- Unit price
- per
-
SikaGrout®-212 HP AUVendor:
Precision grouting is about achieving dependable contact beneath the equipment or structural element being supported. SikaGrout®-212 HP AU is a high-strength, dual shrinkage-compensated cementitious grout for machine baseplates, anchor bolts, bridge bearing pads and engineered concrete connections.Flowable or plastic consistency for the detailInstallers can...
- $59.54
- $59.54
- Unit price
- per
-
SikaGrout® UltraVendor:
Heavy equipment and structural bearings need a grout that transfers load into the supporting concrete without leaving avoidable voids. SikaGrout® Ultra is a high-strength, shrinkage-compensated cementitious grout developed for demanding precision grouting, including machine baseplates, anchor bolts and engineered concrete connections.High-load grouting applicationsIts flowable...
- $102.92
- $102.92
- Unit price
- per
-
SikaTile®-440 Opti-CureVendor:
Rapid tile installations need an adhesive that delivers early strength without sacrificing the flexibility required by the specified tiling system. SikaTile®-440 Opti-Cure is a rapid-setting, flexible cement-based tile and stone adhesive for approved internal and external wall and floor applications.For porcelain, large-format tiles and...
- $128.19
- $128.19
- Unit price
- per
-
Sikafloor®-215 Rapid ScreedVendor:
When flooring work needs a quick turnaround, the screed must develop strength while releasing moisture fast enough for the next stage. Sikafloor®-215 Rapid Screed is a pre-blended, fast-drying engineered cementitious screed for creating level floors and formed falls ahead of compatible tiling and floor-finishing...
- $48.10
- $48.10
- Unit price
- per
-
Sikafloor® Level TOPVendor:
An uneven concrete subfloor makes every subsequent flooring stage harder. Sikafloor® Level TOP is a highly flowable cement-based levelling underlayment for preparing internal concrete floors before compatible floor coverings. It can be mixed and placed manually or pumped on suitable larger projects.Prepare concrete for...
- $60.98
- $60.98
- Unit price
- per
-
Sika® Rugasol® MHVendor:
Exposed aggregate on formed concrete starts before the pour. Sika® Rugasol® MH is a surface-retarding treatment applied to suitable formwork to delay hardening of the cement paste at the concrete face. After stripping, the retarded surface layer can be removed to reveal aggregate or...
- $311.21
- $311.21
- Unit price
- per
-
Formol Eco Formwork Release AgentVendor:
Ease stripping and help preserve reusable concrete moulds without leaving a heavy release coating. Formol Eco is a ready-to-use, mineral-oil-based formwork release agent containing at least 90% recycled mineral oil. It helps prevent freshly placed concrete bonding to suitable steel, timber and fibreglass formwork.Clean...
- $2,435.68
- $2,435.68
- Unit price
- per
-
SikaRapid®-22 AUVendor:
Faster setting and early strength can help keep concrete production moving, particularly in cooler conditions. SikaRapid®-22 AU is a non-chloride setting and hardening accelerator for concrete, mortar and grout. It is designed for premix and precast applications where early finishing, formwork turnover or a...
- $127.17
- $127.17
- Unit price
- per
-
SikaPlast® 3-in-1Vendor:
Adjust concrete workability and water reduction without using an admixture whose purpose is to accelerate or retard setting. SikaPlast® 3-in-1 is a neutral-set liquid water reducer based on modified polycarboxylates. A single product can function as a normal, mid-range or high-range water reducer depending...
- $118.28
- $118.28
- Unit price
- per
-
Sika® UCS PakVendor:
Maintaining concrete cohesion during underwater placement reduces the risk of segregation and paste washout. Sika® UCS Pak is a powdered anti-washout admixture supplied in water-soluble bags for carefully designed underwater concrete mixes. It is intended for use alongside a compatible high-range water reducer or...
- $1,828.07
- $1,828.07
- Unit price
- per
Frequently Asked Questions
Which Sikaflex suits expansion joints on a concrete facade?
Sikaflex Pro. It is a highly elastic one-part polyurethane formulated for connection and movement joints on concrete and masonry, holding adhesion through repeated joint shift.
What is the difference between Sikaflex 11FC Plus and Pro?
11FC Plus is the multi-purpose grade for general sealing and bonding on porous substrates indoors and out. Pro targets facade movement joints specifically. Both cure by moisture.
Do I need Sika Primer before sealing?
On porous or weathered surfaces, usually yes. Sika Primer 3-N keys the substrate so the sealant bonds to the surface rather than dust. Check the primer table on the data sheet for your exact material.
Is there a Sika product for pools?
Sikapool is formulated for permanent immersion and pool-side joints. Standard construction sealants are not rated for continuous water contact, so keep them out of the pool itself.
What cleaner removes uncured Sikaflex?
Sika Remover-208 or mineral turpentine lifts uncured polyurethane from tools and surfaces. Once cured, only mechanical removal works, so clean up inside the skin time.
Which Sika product bonds damp substrates?
Sikaflex 11FC Plus tolerates slightly damp substrates where standard polyurethanes demand bone-dry surfaces, making it the pick for winter and marine-adjacent work. Prime doubtful surfaces and test a sample joint before the main run.