-
Megapoxy 108Vendor:
Megapoxy 108 is a rapid-setting liquid epoxy for bridge pile splicing and high-strength precast concrete repairs. It develops early strength quickly, making it especially useful when civil works cannot wait for a conventional structural grout to cure.Bridge piles and fast concrete repairsUse it to...- From $250.41
$0.00- From $250.41
- Unit price
- per
-
Megapoxy 254Vendor:
Megapoxy 254 is a white, non-sag epoxy adhesive paste for bonding and repairing concrete, metal, brick, fibre cement, ceramics and natural stone. Its thick, creamy consistency stays in place on vertical and overhead surfaces, while the non-staining formulation makes it useful for white marble...
- $596.35
- $596.35
- Unit price
- per
-
Megapoxy 36 DuoMixVendor:
Megapoxy 36 DuoMix is a rapid-setting two-part epoxy adhesive for fixing reflective road markers, ceramic markers, parking sensors and carpark hardware to bituminous or concrete surfaces. It dispenses through a static-mixing nozzle, eliminating the need to hand-mix each small batch.Fast marker installation on concrete...
- From $81.17
- From $81.17
- Unit price
- per
-
Megapoxy 63Vendor:
Megapoxy 63 is a translucent, two-part epoxy adhesive gel for natural stone mitres, porcelain edges and detailed masonry bonding. It forms a neat, thin glue line without the opaque finish of a typical repair paste, and can be tinted with compatible pigment paste.Precision stone...
- From $172.66
- From $172.66
- Unit price
- per
-
Megapoxy 69Vendor:
Megapoxy 69 is a high-strength, non-sag epoxy gel for joining natural stone, structural timber, metals and fibreglass. Its translucent, light-yellow finish allows neat, thin glue lines while providing the impact resistance needed for demanding fabrication and repair work.Mitres, joinery and mixed-material bondingUse 69 for...
- From $85.39
- From $85.39
- Unit price
- per
-
Megapoxy 84Vendor:
Megapoxy 84 is a heat-resistant epoxy paste adhesive for installing high-alumina ceramic wear tiles onto steel or concrete and securing eccentric bushings in crushing equipment. It is designed for industrial parts exposed to abrasive service and temperatures up to 120°C.High-temperature ceramic wear liningsUse it...
- $177.95
- $177.95
- Unit price
- per
-
Megapoxy H - N35 GreyVendor:
Megapoxy H is a low-viscosity, hydrophilic epoxy liquid for bonding new concrete to existing concrete, anchoring steel and repairing cracks in damp or wet conditions. It complies with AS/NZS 4020:2018 for structures in contact with drinking water.Wet-condition concrete bonding and repairUse H for wet-to-dry...
- From $193.22
- From $193.22
- Unit price
- per
-
N35 Grey
-
Natural
-
Megapoxy HTVendor:
Megapoxy HT is a hydrophilic, non-sag epoxy gel for structural bonding and concrete repair where the surface is damp, wet or submerged. Unlike a runny injection resin, its gel consistency holds on vertical and overhead faces and can be applied in thicker layers.Wet and...
- From $197.39
- From $197.39
- Unit price
- per
-
Megapoxy HXVendor:
Megapoxy HX is an extra-low-viscosity epoxy resin for injecting fine, non-moving cracks and penetrating porous stone or concrete. At approximately 200 cps mixed viscosity, it flows into narrow spaces that thicker bonding resins cannot readily reach.Fine crack injection and stone strengtheningUse HX for low-pressure...
- From $203.94
- From $203.94
- Unit price
- per
-
Megapoxy MegabondVendor:
Megapoxy Megabond is a high-strength, off-white epoxy adhesive for bonding natural stone, ceramic tile and prepared masonry. Its non-staining formulation is especially useful when fixing light-coloured marble or other stone where dark adhesive could affect the finish.Stone and tile bonding without stainingChoose Megabond for...
- $500.93
- $500.93
- Unit price
- per
-
Megapoxy P1Vendor:
Megapoxy P1 is a non-sag, two-part epoxy paste for structural concrete repairs, gap filling and bonding steel, stone and precast elements. Its very low-VOC formulation complies with AS/NZS 4020:2018 for use in structures in contact with drinking water.Concrete, tank and pipe repairsUse P1 to...
- From $84.10
- From $84.10
- Unit price
- per
-
Megapoxy PF - WhiteVendor:
Megapoxy PF is a rapid-setting, non-sag epoxy paste for urgent concrete, stone and metal bonding or repairs. It sets in approximately seven minutes and develops more than half its ultimate strength within 15 minutes of mixing at 25°C.Fast repairs where holding time mattersUse PF...
- From $106.84
- From $106.84
- Unit price
- per
-
White
-
Grey
-
Megapoxy PM - WhiteVendor:
Megapoxy PM is a two-part, non-sag epoxy adhesive paste for bonding precast concrete, stone, metal, brick and fibre cement. Its creamy consistency holds on vertical and overhead faces and is formulated not to stain light-coloured marble or ceramics when mixed correctly.Bonding and rebuilding on...
- From $80.50
- From $80.50
- Unit price
- per
-
White
-
Grey
-
Megapoxy RMF Road Marker Epoxy 4LVendor:
Megapoxy RMF is a two-part, non-sag epoxy adhesive intended for bonding raised pavement markers to prepared concrete and asphalt surfaces. It is a specialist road-marker fixing adhesive rather than a general-purpose construction sealant.Applications Installation of reflective and ceramic raised pavement markers. Roadway and driveway...
- $178.13
- $178.13
- Unit price
- per
-
Sikadur®-31 CF NormalVendor:
Structural epoxy bonding and concrete edge repairs demand an adhesive that stays where it is applied. Sikadur®-31 CF Normal is Sika’s two-component, moisture-tolerant epoxy adhesive and repair mortar for rigid bonding, patching and filling on suitable construction substrates. Its thick, non-sag consistency makes it...- From $288.15
- From $288.15
- Unit price
- per
-
Sikadur®-33Vendor:
When a fixing or concrete repair needs a rigid, fast-curing epoxy paste, Sikadur®-33 provides a practical alternative to slow-setting bonding systems. This two-component structural adhesive is formulated for anchoring and fixing applications, localised concrete repairs and sealing non-moving cracks where its smooth, non-sag consistency...
- From $215.53
- From $215.53
- Unit price
- per
-
Sikadur®-32 LPVendor:
Bonding fresh concrete to existing concrete is as much about timing and surface preparation as it is about adhesive strength. Sikadur®-32 LP is a two-component epoxy bonding agent with an extended working life, suited to specified construction and concrete repair work in warmer conditions....
- From $256.78
- From $256.78
- Unit price
- per
-
Mapei Kerapoxy AdhesiveVendor:
Mapei Kerapoxy Adhesive is a two-component epoxy tile adhesive developed for installations where a conventional cement-based adhesive may not provide the chemical resistance or bonding performance required. Its thixotropic, no-vertical-slip consistency helps hold ceramic, porcelain and suitable stone in position while installing on walls,...- $181.98
- $181.98
- Unit price
- per
Filter By Products
Frequently Asked Questions
How do two-part epoxy adhesives work?
Mix resin and hardener at a fixed ratio. The chemical reaction cures the mix into a hard solid. Measure exactly. Wrong mixing leaves soft spots that never cure.
Can I use epoxy adhesive on concrete cracks?
Yes. Megapoxy H is a thin liquid epoxy for crack injection. It bonds wet or dry concrete and cures stronger than the concrete. It is also rated for potable water.
How do I prepare surfaces for epoxy?
Strip all paint, galvanising, and oil. Grit blast or abrade metal to a bright finish. Wire brushing is not enough. Concrete needs mechanical cleaning to remove laitance.
How fast does epoxy adhesive cure?
It depends on the grade. Megapoxy 36 sets road markers traffic-ready in one hour at 25°C. Structural grades take longer. Do not apply any epoxy below 10°C.
Can epoxy adhesive fix swimming pool tiles?
Yes. Kerapoxy Adhesive holds ceramic tiles in fibreglass pools. It resists water and pool chemicals after cure, with no vertical slip while you work. Match the product spec to the job conditions before you start.
What mix ratios do epoxy adhesives use?
Each grade has its own. Megapoxy H mixes at 3 to 1 by volume. Kerapoxy mixes at 80 to 20 by weight. Follow the data sheet exactly.