-
Megapoxy 254Vendor:
For bonding precast concrete, natural stone, and heavy metal fixtures on vertical or overhead surfaces where sagging would ruin the assembly, Megapoxy 254 is a non-sag epoxy adhesive paste that holds its position without slipping. Formulated to cure even under cold and damp conditions,...- $596.35
- $596.35
- Unit price
- per
-
Megapoxy HVendor:
For structural concrete repairs, steel anchoring, and wet-to-dry concrete bonding, Megapoxy H is a low-viscosity, solvent-free hydrophilic epoxy resin that creates permanent bonds stronger than the concrete itself. It complies with AS/NZS 4020:2018 for potable water contact, making it suitable for drinking water structures,...
- From $193.22
- From $193.22
- Unit price
- per
-
Megapoxy HTVendor:
For wet-to-dry concrete bonding, structural repairs, and underwater or splashzone applications, Megapoxy HT is a hydrophilic epoxy gel adhesive that forms permanent bonds on concrete, metal, and steel surfaces. Its formulation is solvent-free, contains no volatile organic compounds (Nil V.O.C.), and resists hydrogen sulphide...
- From $197.39
- From $197.39
- Unit price
- per
-
Megapoxy P1Vendor:
For high-strength structural bonding and concrete repair, Megapoxy P1 is a two-component gap-filling epoxy paste formulated for vertical, overhead, and damp-condition applications. It is chemically resistant to hydrogen sulphide in sewage systems and complies with AS/NZS 4020:2018 for contact with potable drinking water, making...
- From $84.10
- From $84.10
- Unit price
- per
-
Megapoxy PFVendor:
For emergency repairs to concrete structures, pipes, and tanks, Megapoxy PF is a rapid-set epoxy paste adhesive that hardens-as-you-hold-it. It sets in seven minutes and achieves more than half its ultimate strength within 15 minutes of mixing at 25°C, making it suitable for immediate...
- From $106.84
- From $106.84
- Unit price
- per
-
Megapoxy PMVendor:
For structural bonding and repair jobs on vertical or overhead surfaces where sagging must be prevented, Megapoxy PM provides a non-sag epoxy adhesive paste that holds its position. When properly mixed, this two-part epoxy paste secures heavy materials like precast concrete, natural stone, and...
- From $80.50
- From $80.50
- Unit price
- per
Frequently Asked Questions
What are these products for?
Repairing and sealing pipes, tanks, and water structures. The Megapoxy range is for concrete pipe and tank repair, including underwater and rapid-set work. Nitoseal SC600 is a silicone sealant for pool and plumbing joints.
Can I use these on drinking water?
Several are certified to AS/NZS 4020 for potable water contact. Megapoxy H, Megapoxy P1, and Nitoseal SC600 all carry that certification. Check the current certificate and the approved substrates on the product page before you use it on a drinking-water system.
Which product do I use for a sewage or wastewater repair?
Megapoxy H, HT, and P1 resist the hydrogen sulphide gas found in sewage systems. Megapoxy PM and PF handle concrete pipe and tank repairs, including underwater cure.
Can any of these fix an active leak?
Megapoxy PF is a rapid-set paste for emergency repairs to concrete, pipes, and tanks. Megapoxy PM holds its strength underwater once cured, so it suits leaks you cannot fully dry out first.
What is the difference between Nitoseal SC600 and the Megapoxy epoxies?
SC600 is a silicone sealant. It flexes, so it seals moving joints in pools, plumbing, and tanks. The Megapoxy products are two-part epoxies. They bond, grout, and coat rigid surfaces. Use SC600 for a joint that moves, and Megapoxy for a rigid repair.