Concrete & Civil Products

Use GRIPSET B26 for cold-applied asphalt and bitumen crack sealing. Its fast-drying, flexible formulation allows traffic in 15 minutes, avoiding the need for heating equipment and resisting sulphates.

Use Mountain Grout Flexible for permanent crack sealing in concrete infrastructure. This hydrophobic polyurethane expands up to 30 times into a closed-cell foam, remaining flexible (44% elongation) and resistant to wet/dry cycles without shrinkage.

Use Mountain Grout Gel Foam for active water leak repairs in concrete. Its hydrophilic chemistry ensures up to 25 times expansion and high elongation for durable, flexible seals, especially under continuous water exposure.

Use Efflock Hydrophobic Additive to stop efflorescence and damp in cement-based materials like screeds, mortars, and concrete. This VOC-free, concentrated additive provides bulk hydrophobic protection throughout the material, reducing water absorption and often negating the need for a costly secondary membrane.

Use Gripset C-PLUG to instantly stop active water leaks in concrete and masonry. It sets in 30-60 seconds, cures to 35 MPa, and is safe for potable water.

Use Gripset 11Y to enhance cement-based compounds for demanding conditions, providing superior adhesion and water resistance for screeds, renders, and repair mortars in continuous immersion or freeze/thaw environments.

Use EverKrete Concrete Repair System Trade Kit for rapid, high-strength concrete repairs. It achieves full traffic in 45-90 minutes at 25°C and offers over 70 MPa compressive strength, significantly reducing site downtime.

Use Gripset B09 to rejuvenate oxidised asphalt and re-surface pitted layers, providing a non-slip, durable coating. Its unique polymer technology and cement cross-linking property deliver fast drying and extended asset life.

Use RLA Penapatch Panel LW for fire-rated, non-structural concrete repairs on vertical and overhead surfaces. It provides a 4-hour fire rating to AS1530.4 at 35mm, allows single-application builds up to 100mm overhead, and achieves 20 MPa compressive strength.

Use EverKrete 102 as a flexible thermoset vinyl polymer binder for robust concrete mortars and slip-resistant overlays, offering fast cure and reliable priming for concrete from -18°C to +15°C.

Penapatch HB50 is a polymer-modified, fibre-reinforced, shrinkage-compensated structural repair mortar formulated for vertical, overhead and horizontal concrete repairs. Achieve high build in a single pass with excellent adhesion, low permeability and high ultimate strength — just add water.

Use RLA Penapatch Fairing Coat Mortar for thin-layer concrete repairs up to 5mm, providing a smooth, durable finish. Its fast 25-minute working time and negligible shrinkage ensure efficient, quality results for exposed or over-coated applications.

Use Armadillo D to densify and dustproof concrete floors, chemically reacting with the substrate to create a harder, more abrasion-resistant surface. It is after-trades compatible and Green Star compliant for enhanced project outcomes.

Use RLA Penaflow Panel Grout for high-strength, non-shrink structural support, achieving over 55 MPa compressive strength at 28 days with controlled plastic state expansion for reliable load transfer.

White SBR latex admixture for cement screeds, renders and bonding slurries; EN 1542 adhesion exceeds 2.0 MPa after 28 days in the reference mortar.

Use RLA Penapatch HB80 for high-strength structural concrete repairs requiring up to 68 MPa compressive strength. It allows high-build applications in a single pass and offers excellent resistance to chloride attack and carbonation, making it suitable for durable long-term reinstatement.

Use Mapegrout T40 for R3 structural concrete repairs requiring medium mechanical performance. This 40 MPa, shrinkage-compensated, fibre-reinforced mortar applies without slump on vertical surfaces, ensuring durable and compliant repairs.

Use Mountain Grout Flexible for permanent crack sealing in concrete infrastructure. This hydrophobic polyurethane expands up to 30 times into a closed-cell foam, remaining flexible (44% elongation) and resistant to wet/dry cycles without shrinkage.

Use RLA Penaflow Panel Grout for critical non-shrink grouting of precast elements, anchor bolts, and voids. It delivers over 55 MPa strength at 28 days with 0% bleed and consistent plastic state expansion.

Use ARDEX RA 54 for fast-setting, semi-rigid filling of concrete control joints and new construction saw joints in heavy-duty traffic areas. It cures rapidly, allowing traffic in just 90 minutes, providing a Shore A Hardness of 75-80 for robust performance.

Use RLA Penatech HES Grout for critical support and anchoring applications requiring fast load bearing. It delivers over 60 MPa compressive strength in 24 hours with dual-stage shrinkage compensation and AS1478 Class C compliance.

Use ARDEX RA 88 PLUS for high-performance epoxy bonding and non-moving repairs on concrete and other materials, offering 87 MPa compressive strength and AS/NZS4020 potable water compliance in a non-sag, trowelable format.

Use ARDEX RA 142 for structural concrete crack injection and bonding, specifically targeting hairline to 3mm cracks. Its 190 cps low viscosity ensures deep penetration, delivering 70 MPa compressive strength to restore integrity.

Use RLA Penatech HS Grout for critical structural grouting from 10mm to 150mm, ensuring non-shrink performance with dual expansion and compressive strengths up to >85 MPa. It meets ASTM C1107-91 and handles dynamic loads, providing a reliable, stain-free solution.

Use Mapei Lamposilex to instantly stop active water leaks in concrete and masonry. It sets in 90 seconds, withstands pressurised water, and is AS/NZS 4020:2018 certified for potable water contact.

Use Mapegrout Fast-Set Rapido for rapid structural concrete repairs. It achieves over 10 MPa compressive strength in 3 hours, holds 20-25 mm vertically without slump, and is classified R3 for efficient site turnaround.

Use Planitop Fine Finish for feather-edge skim coating and levelling concrete surfaces up to 3mm. It delivers a breathable, uniform finish that is paintable in 7 days, avoiding surface imperfections under coatings.

Cement Australia Sand & Cement (Screed) is a pre-blended, ready-to-use mortar mix. Simply add water for a consistent and convenient solution for various handyman, landscaping, plumbing, and repair applications.

EverKrete Accelerator speeds up the curing of EverKrete 102 resin, ideal for cold conditions and fast project turnaround.

Enhance mortar and render performance with Plastabond – a PVA-based bonding agent delivering improved adhesion, reduced shrinkage, and chemical resistance.