-
Megapoxy 108Vendor:
Megapoxy 108 is a rapid-setting liquid epoxy for bridge pile splicing and high-strength precast concrete repairs. It develops early strength quickly, making it especially useful when civil works cannot wait for a conventional structural grout to cure.Bridge piles and fast concrete repairsUse it to...- From $250.41
$0.00- From $250.41
- Unit price
- per
-
Megapoxy 132 - GreyVendor:
Megapoxy 132 is a solvent-free, high-strength epoxy coating for factory and warehouse floors, commercial kitchens and food or beverage production areas. It forms a smooth, high-gloss surface that resists abrasion and is easy to keep clean. Protect and finish concrete floors Use it on...
- From $195.36
- From $195.36
- Unit price
- per
-
Grey
-
Clear
-
Megapoxy 154Vendor:
Megapoxy 154 is a water-based epoxy primer and sealer for concrete and masonry, including suitably prepared damp or green concrete. It seals porous surfaces and forms a tough, matt finish, making it particularly useful when preparing a slab for a flooring system.Prime damp slabs...
- $700.00
- $700.00
- Unit price
- per
-
Megapoxy 206 UltraVendor:
Megapoxy 206 Ultra is a heavy-duty, flowable structural epoxy grout for supporting machinery baseplates, setting anchor bolts and grouting rail tracks and bridge bearings. It fills prepared voids around steel and concrete to form a strong, impact-resistant connection in demanding civil and industrial installations.Structural...
- From $159.57
- From $159.57
- Unit price
- per
-
Megapoxy 254Vendor:
Megapoxy 254 is a white, non-sag epoxy adhesive paste for bonding and repairing concrete, metal, brick, fibre cement, ceramics and natural stone. Its thick, creamy consistency stays in place on vertical and overhead surfaces, while the non-staining formulation makes it useful for white marble...
- $596.35
- $596.35
- Unit price
- per
-
Megapoxy 34Vendor:
Megapoxy 34 is a low-viscosity electrical potting and casting epoxy for protecting underground cable joints, transformer coils and switchgear components. It pours into prepared housings and around electrical connections before curing into a hard insulating mass.Encapsulate cables and electrical componentsUse it to cast underground...
- From $152.50
- From $152.50
- Unit price
- per
-
Megapoxy 36 DuoMixVendor:
Megapoxy 36 DuoMix is a rapid-setting two-part epoxy adhesive for fixing reflective road markers, ceramic markers, parking sensors and carpark hardware to bituminous or concrete surfaces. It dispenses through a static-mixing nozzle, eliminating the need to hand-mix each small batch.Fast marker installation on concrete...
- From $81.17
- From $81.17
- Unit price
- per
-
Megapoxy 63Vendor:
Megapoxy 63 is a translucent, two-part epoxy adhesive gel for natural stone mitres, porcelain edges and detailed masonry bonding. It forms a neat, thin glue line without the opaque finish of a typical repair paste, and can be tinted with compatible pigment paste.Precision stone...
- From $172.66
- From $172.66
- Unit price
- per
-
Megapoxy 69Vendor:
Megapoxy 69 is a high-strength, non-sag epoxy gel for joining natural stone, structural timber, metals and fibreglass. Its translucent, light-yellow finish allows neat, thin glue lines while providing the impact resistance needed for demanding fabrication and repair work.Mitres, joinery and mixed-material bondingUse 69 for...
- From $85.39
- From $85.39
- Unit price
- per
-
Megapoxy 84Vendor:
Megapoxy 84 is a heat-resistant epoxy paste adhesive for installing high-alumina ceramic wear tiles onto steel or concrete and securing eccentric bushings in crushing equipment. It is designed for industrial parts exposed to abrasive service and temperatures up to 120°C.High-temperature ceramic wear liningsUse it...
- $177.95
- $177.95
- Unit price
- per
-
Megapoxy CT5Vendor:
Megapoxy CT5 is a black, cold-pour epoxy encapsulant for traffic detector loops, weigh-in-motion sensors, roadway lighting and airport landing-light recesses. It flows around embedded cables and components in concrete or asphalt without the brittle finish of a conventional rigid grout.Encapsulate traffic loops and runway...
- $605.72
- $605.72
- Unit price
- per
-
Megapoxy EVendor:
Megapoxy E is a two-part epoxy casting system for insulating and protecting instrument transformers, lighting transformers, power transformers, coils and electrical switchgear components. Two hardener options let you choose the working time and temperature performance that suit the electrical assembly.Choose the right Megapoxy E...
- From $179.39
- From $179.39
- Unit price
- per
-
Megapoxy H - N35 GreyVendor:
Megapoxy H is a low-viscosity, hydrophilic epoxy liquid for bonding new concrete to existing concrete, anchoring steel and repairing cracks in damp or wet conditions. It complies with AS/NZS 4020:2018 for structures in contact with drinking water.Wet-condition concrete bonding and repairUse H for wet-to-dry...
- From $193.22
- From $193.22
- Unit price
- per
-
N35 Grey
-
Natural
-
Megapoxy HICBVendor:
Megapoxy HICB is a pourable, high-impact epoxy backing compound for crusher liners and heavy processing machinery. It fills gaps behind metal wear liners to provide a rigid, supportive layer that distributes crushing loads.Backing for crusher and mill linersPour Megapoxy HICB behind prepared liner plates...
- $148.06
- $148.06
- Unit price
- per
-
Megapoxy LVSVendor:
Megapoxy LVS is a clear, low-viscosity epoxy sealer and primer that soaks into porous concrete, brick, mortar, natural stone and timber. It strengthens the surface and reduces its ability to absorb moisture, oils and other contaminants.Sealing porous concrete and timberUse LVS to harden porous...
- From $216.72
- From $216.72
- Unit price
- per
-
Megapoxy MC - Caribbean BlueVendor:
Megapoxy MC is a high-build epoxy maintenance coating for busy industrial floors, walls and steelwork exposed to abrasion, cleaning chemicals and everyday plant wear. Its smooth, hygienic gloss finish is suited to food and beverage factories, warehouses, workshops and wastewater infrastructure.Industrial floor, wall and...
- From $173.63
- From $173.63
- Unit price
- per
-
Caribbean Blue
-
Pacific Blue
-
Charcoal
-
Dark Grey
-
Megapoxy HTVendor:
Megapoxy HT is a hydrophilic, non-sag epoxy gel for structural bonding and concrete repair where the surface is damp, wet or submerged. Unlike a runny injection resin, its gel consistency holds on vertical and overhead faces and can be applied in thicker layers.Wet and...
- From $197.39
- From $197.39
- Unit price
- per
-
Megapoxy HXVendor:
Megapoxy HX is an extra-low-viscosity epoxy resin for injecting fine, non-moving cracks and penetrating porous stone or concrete. At approximately 200 cps mixed viscosity, it flows into narrow spaces that thicker bonding resins cannot readily reach.Fine crack injection and stone strengtheningUse HX for low-pressure...
- From $203.94
- From $203.94
- Unit price
- per
-
Megapoxy MegabondVendor:
Megapoxy Megabond is a high-strength, off-white epoxy adhesive for bonding natural stone, ceramic tile and prepared masonry. Its non-staining formulation is especially useful when fixing light-coloured marble or other stone where dark adhesive could affect the finish.Stone and tile bonding without stainingChoose Megabond for...
- $500.93
- $500.93
- Unit price
- per
-
Megapoxy P1Vendor:
Megapoxy P1 is a non-sag, two-part epoxy paste for structural concrete repairs, gap filling and bonding steel, stone and precast elements. Its very low-VOC formulation complies with AS/NZS 4020:2018 for use in structures in contact with drinking water.Concrete, tank and pipe repairsUse P1 to...
- From $84.10
- From $84.10
- Unit price
- per
-
Megapoxy PF - WhiteVendor:
Megapoxy PF is a rapid-setting, non-sag epoxy paste for urgent concrete, stone and metal bonding or repairs. It sets in approximately seven minutes and develops more than half its ultimate strength within 15 minutes of mixing at 25°C.Fast repairs where holding time mattersUse PF...
- From $106.84
- From $106.84
- Unit price
- per
-
White
-
Grey
-
Megapoxy PM - WhiteVendor:
Megapoxy PM is a two-part, non-sag epoxy adhesive paste for bonding precast concrete, stone, metal, brick and fibre cement. Its creamy consistency holds on vertical and overhead faces and is formulated not to stain light-coloured marble or ceramics when mixed correctly.Bonding and rebuilding on...
- From $80.50
- From $80.50
- Unit price
- per
-
White
-
Grey
-
Megapoxy Pigment Paste - WhiteVendor:
Megapoxy Pigment Paste is a concentrated colour paste for tinting compatible Megapoxy resins and adhesives. It helps stone fabricators and repairers match visible epoxy joints, chips and filled voids to the surrounding marble, granite, porcelain or concrete.Colour-match the repair, not just the stoneChoose from...
- $51.10
- $51.10
- Unit price
- per
-
White
-
Beige
-
Brown
-
Grey
-
Megapoxy ThinnersVendor:
Megapoxy Thinners is a flammable solvent blend used to clean uncured Megapoxy resin from compatible mixing vessels, trowels and application tools. It is most useful during or immediately after epoxy application, before leftover material hardens.Use it to remove fresh epoxy residue from suitable equipment....
- $221.95
- $221.95
- Unit price
- per
-
Megapoxy MegadureVendor:
Megapoxy Megadure is a ceramic-bead-filled, trowelable epoxy wear compound for repairing and protecting equipment that handles abrasive slurry, aggregate and mineral material. It builds a hard sacrificial lining on exposed steel, concrete and industrial wear surfaces.Protecting chutes, pumps and high-wear equipmentBuild up worn surfaces...
- $128.51
- $128.51
- Unit price
- per
-
Static Mixer Nozzle For Megapoxy 36 CartridgeVendor:
Megapoxy 36 DuoMix Static Mixer Nozzle is a disposable replacement nozzle for Megapoxy 36 DuoMix road-marker adhesive cartridges. Its internal mixing elements combine the two epoxy components as you dispense, helping you work through multiple markers without mixing separate batches.Keep spare nozzles on hand...
- From $11.26
- From $11.26
- Unit price
- per
-
Static Mixer Nozzle For Megapoxy PM CartridgeVendor:
Megapoxy PM DuoMix Static Mixer Nozzle is a disposable replacement tip for the grey DuoMix cartridge variant of Megapoxy PM. It combines both epoxy components during dispensing, giving you a consistent mixed paste for concrete, masonry and stone bonding.Useful as a spare during longer...
- From $11.26
- From $11.26
- Unit price
- per
-
Megapoxy 57 Slow Epoxy Grout 9.4kg KitVendor:
Megapoxy 57 Slow is a high-strength, solvent-free epoxy grout for demanding civil and industrial grouting applications. Its extended working time helps installers place grout around bearing pads, machinery bases and anchor assemblies before curing.Applications Bridge bearing pads and rail infrastructure grouting. Machinery chocking and...
- $161.71
- $161.71
- Unit price
- per
-
Megapoxy RMF Road Marker Epoxy 4LVendor:
Megapoxy RMF is a two-part, non-sag epoxy adhesive intended for bonding raised pavement markers to prepared concrete and asphalt surfaces. It is a specialist road-marker fixing adhesive rather than a general-purpose construction sealant.Applications Installation of reflective and ceramic raised pavement markers. Roadway and driveway...
- $178.13
- $178.13
- Unit price
- per
Frequently Asked Questions
Which Megapoxy Product should I use?
Select the Product by the task, substrate, exposure and working time. Use the current technical data to confirm bond strength, viscosity and cure limits. Do not select an epoxy from its colour or pack size alone.
How do I mix a two-part Megapoxy Product?
Measure Part A and Part B at the ratio in the Product technical data. Mix until the material is uniform. Do not change the ratio, and do not mix more than you can place within the stated working time.
Can I apply Megapoxy to damp concrete?
Only use it on damp concrete when the selected Product technical data permits that condition. Remove standing water, loose material and contamination. Prepare the surface by the specified method before you mix or apply the epoxy.
How long does Megapoxy take to cure?
Cure time depends on the Product, temperature, section size and exposure. Check the current technical data for working time, initial cure and full service time. Do not load, coat or immerse the work too early.
What safety equipment do I need for epoxy work?
Read the current safety data for both components. Use the stated gloves, eye protection and ventilation. Avoid skin contact, keep the work area clean, and dispose of mixed and unmixed waste as required.