-
Lauxes Grates Waste Corner Joiner 90° PairVendor:
A pair of 90-degree corner joiners for Lauxes linear grate systems. The joiners clip the channel runs together at a right angle, so corners come out square and flush without mitre cutting or waiting on adhesive to cure.Anodised aluminium stands up to salt and...- $16.00
- $16.00
- Unit price
- per
-
Lauxes Grates End CapsVendor:
Lauxes Grates End Caps are precision-engineered anodised aluminium components designed to secure linear drainage terminations in internal wet areas and external coastal environments. These end caps prevent water egress behind waterproofing membranes and offer a lifetime rustproof guarantee, ensuring structural integrity against salt-air corrosion...
- From $8.50
- From $8.50
- Unit price
- per
-
Lauxes Grates Pop Waste OutletsVendor:
Lauxes Grates Pop Waste Outlets are precision-engineered anodised aluminium components designed for high-corrosion environments including coastal builds and commercial wet rooms. These outlets feature a mechanical fitment design that provides immediate installation across 40mm to 80mm pipework without requiring primers or wait times for...
- $11.67
- $11.67
- Unit price
- per
-
Lauxes Grates TCT Hole Saws For Pop Waste OutletVendor:
Lauxes Grates TCT hole saws cut clean drainage holes in anodised aluminium channels for pop waste outlet installation. The carbide-tipped teeth stay sharp through repeated trade use, and each size matches one Lauxes waste outlet diameter: 40mm, 50mm, 72mm, and 80mm. Pick the hole...
- From $36.67
- From $36.67
- Unit price
- per
-
Lauxes Grates Waste Joiner 180° PairVendor:
A pair of 180-degree joiners for extending Lauxes linear grate runs in a straight line. The press-fit joins the channel lengths square and true, so long runs stay aligned without adhesives, primers, or cure time.Anodised aluminium, colour matched to the channel finishes (Silk Silver,...
- $16.00
- $16.00
- Unit price
- per
-
Megaflex™ Puddle FlangeVendor:ART AustraliaFor wet-area drainage installations requiring verified compliance, the Megaflex Puddle Flange provides a secure connection between the waterproofing membrane and the drainage riser. Bearing WaterMark certification, this flange ensures compliance with Australian plumbing standards at the critical transition point where subsurface moisture meets the...
- From $8.13
- From $8.13
- Unit price
- per
Frequently Asked Questions
What are these fittings for?
They connect and finish a drainage run. End caps close a channel, joiners turn or extend it, pop waste outlets couple it to the pipework, and a puddle flange seals the membrane where the pipe goes through the slab.
What does a puddle flange do?
It seals the gap where the waste pipe penetrates the slab, so water cannot track back under the waterproofing membrane. The Megaflex puddle flange is WaterMark certified. Match it to the pipe size and the membrane detail.
Why would I need an end cap?
To close the open end of a linear channel. Without one, water can run out the end and behind the wall or the adjoining floor. The Lauxes end caps are sealed at the channel-to-cap joint. Match the cap to the channel profile.
What do the joiners do?
The 180-degree joiners connect two channels in a straight line. The 90-degree joiners turn a corner. They let you build a run longer or around a bend than a single channel allows. Match the joiner to the channel model.
Why is a hole saw listed here?
To cut the outlet hole in the bottom of a Lauxes channel tray. It is an installation tool for the job, not a drain. Use it to set the outlet where the channel meets the waste.