Ardex

For resilient and textile floor installations complying with AS 1884, ARDEX AF 171 is an off-white, low-VOC universal flooring adhesive that provides high resistance to plasticiser migration, extended open times, and excellent dimensional stability under vinyl sheet, luxury vinyl tiles, planks, and linoleum. What...

For interior and exterior tiling jobs where clean, flush joints are required, ARDEX FG8 is a smooth, flexible cement-based grout for joints 1mm to 8mm wide. It contains ARDEX Grout Shield to combat mould growth and is polymer-fortified to reduce the likelihood of cracking,...

For high-moisture tiled areas where persistent dampness leads to mould and staining, ARDEX FS-DD is a non-sanded, cement-based tile grout that resists both water absorption and dirt penetration. Formulated with a special hydrophobing agent and ARDEX Grout Shield, this compound keeps joints up to...

For porous substrates including CFC sheet, concrete, masonry, and jointing compound over plasterboard, ARDEX Multiprime prepares the surface to improve the adhesion of subsequent approved ARDEX products. This water-based liquid primer dries quickly in both internal and external applications, providing a reliable bond interface...

For pressure injection and gravity feed structural crack repair in horizontal concrete and masonry, ARDEX RA 142 seals and bonds hairline to fine cracks from 0.05mm to 3mm. This two-component, 100% solids epoxy adhesive has a super low viscosity that penetrates deep into fine...

For industrial concrete floors subject to heavy-duty vehicle traffic, ARDEX RA 54 fills interior control joints and new construction saw joints to support heavy wheels and prevent joint edge spalling. This fast-setting, semi-rigid polyurea formulation cures rapidly, allowing repaired joints to be shaved in...

For horizontal, vertical, and overhead concrete repairs, ARDEX RA 88 Plus is a non-drip, non-sag epoxy adhesive that fills holes, seals cracks, and sets anchor bolts. It is formulated to bond structurally to major construction substrates—including metal, concrete, brick, wood, stone, and block—and meets...

For large external sheet-membrane installations on concrete, screed, brick, CFC sheet, timber, and some PVC substrates, WA 98 Contact Adhesive provides the extended tack window required to secure membranes over high-volume areas. This solvent-based neoprene contact adhesive is formulated specifically for bonding ARDEX Weldtec,...

For residential and light commercial tiling jobs where large-format or heavy tiles risk slipping on walls, ARDEX X 17 Tile Adhesive provides a non-slump, polymer-fortified mortar bed. It achieves an S1 classification to accommodate the subtle movement of common wall and floor substrates, including...

For high-demand tiling installations in swimming pools, wet areas, and commercial floors, ARDEX X 18 Tile Adhesive provides a polymer-fortified, fibre-reinforced cement mortar with mastic-type properties. Formulated with integrated fibres to add structural strength to the tile bed, this non-slump adhesive accommodates the mechanical...

For installations requiring light handling and extended coverage on walls and floors, ARDEX X 68 Tile Adhesive provides a low-weight, sand-free option for fixing fully vitrified tiles, ceramic tiles, porcelain, mosaics, and moisture-insensitive natural stone. It is formulated for internal and external jobs, including...

Ardex X56 Tile Adhesive is a rapid-set tile adhesive for flooring and tiling. It gives S2 flexibility for movement-prone substrates. It accepts grout in approximately 4 hours at 23°C and 50% relative humidity.