RLA

Use RLA 2 Part Cementitious Membrane for demanding immersion and potable water applications. This Class II flexible membrane is AS 4020 certified for drinking water and offers 214% elongation, ensuring a durable, compliant waterproof barrier under tiles.

Use RLA TruLevel BulkFill UT to correct deep imperfections on internal concrete substrates, achieving a strong, level surface from 3mm to 70mm. It provides a robust, pumpable base with high mechanical resistance, ready for most floor coverings in 24-36 hours.

Use RLA Foam Filler for high-yield filling and sealing of irregular gaps and cavities. It expands up to 45 times to form a stable, airtight seal, reducing callbacks from drafts and noise without distorting frames.

Use RLA Moisture Seal as a high-performance 2-part epoxy barrier against moisture and vapour. It withstands 2.5 bar of hydrostatic pressure and can be applied to damp or "green" concrete, preventing moisture-related failures under overlaid finishes.

Use RLA Penaflow Panel Grout for high-strength, non-shrink structural support, achieving over 55 MPa compressive strength at 28 days with controlled plastic state expansion for reliable load transfer.

Use RLA Penapatch Fairing Coat Mortar for thin-layer concrete repairs up to 5mm, providing a smooth, durable finish. Its fast 25-minute working time and negligible shrinkage ensure efficient, quality results for exposed or over-coated applications.

Penapatch HB50 is a polymer-modified, fibre-reinforced, shrinkage-compensated structural repair mortar formulated for vertical, overhead and horizontal concrete repairs. Achieve high build in a single pass with excellent adhesion, low permeability and high ultimate strength — just add water.

Use RLA Penapatch HB80 for high-strength structural concrete repairs requiring up to 68 MPa compressive strength. It allows high-build applications in a single pass and offers excellent resistance to chloride attack and carbonation, making it suitable for durable long-term reinstatement.

Use RLA Penapatch Panel LW for fire-rated, non-structural concrete repairs on vertical and overhead surfaces. It provides a 4-hour fire rating to AS1530.4 at 35mm, allows single-application builds up to 100mm overhead, and achieves 20 MPa compressive strength.

Use RLA Penatech HES Grout for critical support and anchoring applications requiring fast load bearing. It delivers over 60 MPa compressive strength in 24 hours with dual-stage shrinkage compensation and AS1478 Class C compliance.

Use RLA Penatech HS Grout for critical structural grouting from 10mm to 150mm, ensuring non-shrink performance with dual expansion and compressive strengths up to >85 MPa. It meets ASTM C1107-91 and handles dynamic loads, providing a reliable, stain-free solution.

Use RLA Polymastic for internal wall tiling, bonding porous ceramic, mosaic, and large format tiles with its D1TE non-slump classification and excellent workability.

Use RLA TruLevel Flexi for internal levelling of concrete and timber subfloors from 1-20mm. Its fibre-reinforced, flexible formulation prevents cracking, achieves foot traffic in 2-3 hours, and allows floor covering installation in 12-24 hours.

Use RLA TruLevel EconoScreed Rapid for rapid subfloor preparation where floor coverings need to go down fast. It achieves 65 MPa compressive strength and allows ceramic tiles in 4-6 hours, making it ideal for high-traffic and wet areas.

Use RLA TruLevel Fine Finish for rapid skim smoothing of internal concrete and masonry substrates up to 3mm thick. It provides a smooth base ready for floor coverings in just 20 minutes, ensuring quick project turnaround without compromise.

Use RLA TruLevel TuffTop for rapid, high-strength internal and external concrete levelling from 3-30mm, allowing foot traffic in 3-4 hours and floor coverings in 18 hours, certified CT-C40-F8 for commercial demands.

Use RLA Universal Primer to manage suction on porous concrete or promote adhesion on non-porous surfaces like tiles. This water-based acrylic primer dries tack-free in 30-60 minutes, preventing bond failures before tiling or levelling.

Use RLA Penaflow Panel Grout for critical non-shrink grouting of precast elements, anchor bolts, and voids. It delivers over 55 MPa strength at 28 days with 0% bleed and consistent plastic state expansion.