-
38mm Sausage Gun NozzleVendor:Adheseal ToolsDesigned to fit standard sausage guns, this nozzle allows for controlled and precise dispensing of materials from 38mm sausage packs.
- From $2.04
- From $2.04
- Unit price
- per
-
19mm Sausage Gun NozzleVendor:Adheseal ToolsThe 19mm Sausage Gun Nozzle is designed to provide precise and efficient application of sealants, adhesives, and other viscous materials.
- From $1.38
- From $1.38
- Unit price
- per
-
Silicone Nozzle Extensions (6 pack)Vendor:Adheseal ToolsUse Silicone Nozzle Extensions for precise sealant application in deep cavities and obstructed reveals. They extend reach and control, reducing rework and physical strain with a universal screw-on fit.
- $9.20
- $9.20
- Unit price
- per
-
45 Degree Sausage Gun Nozzle 38mmVendor:Adheseal ToolsPrecision-engineered 45° nozzle ideal for 38mm sausage applicators. Perfect for angled or overhead joint access with improved control.
- From $4.40
- From $4.40
- Unit price
- per
-
Silicone Corner Nozzles (4 Pack)Vendor:Adheseal ToolsThese angled nozzles effortlessly dispense silicone sealant into 45º or 90º corners, ensuring a neat and precise finish.
- $9.50
- $9.50
- Unit price
- per
-
Static Mixer Nozzle For Megapoxy 36 CartridgeVendor:
Use this static mixer nozzle for Megapoxy 36 cartridge applications where a precise, reliable mix is critical. Its internal baffles ensure the correct stoichiometric ratio, preventing bond failure and ensuring full structural performance.- From $11.26
- From $11.26
- Unit price
- per
-
Sausage Gun Nozzle Adaptor (2 Pack)Vendor:Adheseal ToolsThe Sausage Gun Nozzle Adaptor (2 Pack) is a practical accessory designed to enhance the versatility of your sausage gun or caulking gun.
- $9.20
- $9.20
- Unit price
- per
-
Static Mixer Nozzle For Megapoxy PM CartridgeVendor:
Static Mixer Nozzle For Megapoxy PM Cartridge is a dedicated dispensing tool for two-part thixotropic epoxy pastes used in structural stone masonry and civil anchoring. Specifically engineered helical mixing elements maintain a precise stoichiometric balance during high-pressure extrusion to prevent tacky spots or structural...
- From $11.26
- From $11.26
- Unit price
- per
-
Static Mixer Nozzle For MC228Vendor:Adheseal ToolsUse the Static Mixer Nozzle for MC228 to ensure uniform colour blending when applying MC-228 Multi-Colour Flexi Gap Sealant, eliminating manual mixing and reducing material waste.
- $3.36
- $3.36
- Unit price
- per
Frequently Asked Questions
Which nozzle do I need for my caulking gun?
Match the nozzle to the cartridge or sausage pack and the gun system. Check the product details for the correct fit before you order. This avoids leaks and poor bead control.
Can I use a static mixer nozzle more than once?
No. Cured adhesive can block the mixing elements and stop the two parts from mixing correctly. Fit a new static mixer nozzle when the old nozzle has cured material inside.
How do I cut a sealant nozzle?
Cut the tip at an angle that suits the joint width. Make a smaller opening for a narrow bead and a larger opening for a wider bead. Test the bead before you start the joint.
Do nozzles fit every caulking gun?
No. Nozzles use different fittings and pack formats. Check the nozzle suits a sausage pack, cartridge, or static mixer before you buy. Confirm the pack format first.
When should I replace a nozzle?
Replace a nozzle when it is blocked, damaged, or no longer gives a steady bead. Use a new static mixer nozzle after the adhesive starts to cure inside it.
- Choosing a selection results in a full page refresh.