-
Xtraseal MS-609 MS Polymer AdhesiveVendor:
For high-load installations, vertical panels, and joints subject to constant vibration or deformation, Xtraseal MS-609 MS Polymer Adhesive provides an immediate 1-second grab without requiring temporary supports for most lightweight components. This single-part, moisture-curing hybrid polymer remains permanently elastic after curing and adheres reliably...- From $11.03
- From $11.03
- Unit price
- per
-
Adheseal Gap Filla Acrylic SealantVendor:
For sealing gaps around internal window and door frames, cornices, plasterboard, sidings, vents, and tiles, Gap Filla Acrylic Sealant provides a flexible seal where rigid fillers are prone to cracking and falling out. How it works Gap Filla is an acrylic polymer sealant that...
- From $3.15
- From $3.15
- Unit price
- per
-
Diggers AcetoneVendor:DiggersUse Diggers Acetone when you need a fast-evaporating solvent for cleaning PVC pipe before gluing, removing stubborn adhesives or cleaning fibreglass tools. It dries quickly, mixes completely with water and is intended for cleaning rather than surface coating or protection. Why this product exists...
- From $22.17
- From $22.17
- Unit price
- per
-
Adheseal IPA CleanerVendor:
For prep work prior to applying adhesives, sealants, or surface primers, Adheseal IPA Cleaner removes surface contaminants to ensure a clean substrate and a reliable bond. This 100% isopropyl alcohol cleaner removes fluxes, light oils, grime, and oxides, then evaporates within seconds without leaving...
- From $17.50
- From $17.50
- Unit price
- per
-
Methylated Spirits 95%Vendor:
For preparing substrates before adhesive or sealant application, removing wet adhesives, and cleaning tools, Adheseal Methylated Spirits 95% is a denatured alcohol formulated for use on non-porous surfaces. It functions as a rapid-evaporating solvent that leaves no residue, ensuring a clean surface for optimal...
- $146.73
- $146.73
- Unit price
- per
-
Window PackersVendor:
Horseshoe plastic packers for levelling and spacing around bolts and fixings. Slide one in around the bolt without removing it, and the frame or panel sits at true height and square before you tighten it off.Glazing frames, facade panels, cladding, doors: anywhere a fixing...
- From $48.97
- From $48.97
- Unit price
- per
-
Megapoxy 69Vendor:
For high-load structural joinery, marine assembly, and stone fabrication where components are subject to repeated high-impact forces, Megapoxy 69 provides a permanent bond with a non-sag, gel-type consistency. It secures metals, timber, granite, marble, and fibreglass on vertical and overhead surfaces without slumped joints...- From $85.39
- From $85.39
- Unit price
- per
-
Megapoxy PM - WhiteVendor:
For structural bonding and repair jobs on vertical or overhead surfaces where sagging must be prevented, Megapoxy PM provides a non-sag epoxy adhesive paste that holds its position. When properly mixed, this two-part epoxy paste secures heavy materials like precast concrete, natural stone, and...
- From $80.50
- From $80.50
- Unit price
- per
-
White
-
Grey
-
Industrial Cleaning Rags 10kg - White T-ShirtVendor:Adheseal ToolsWiping rags in 10kg bags, the workshop staple. Pick the grade to suit the job: premium white cotton for glass, coatings, and finishing where lint and colour would show, or coloured and white t-shirt material for general cleanup, polishing, and maintenance.Recycled cotton with low...
- From $36.80
- From $36.80
- Unit price
- per
-
White T-Shirt
-
Coloured Mixed T-Shirt
-
White Cotton Shirt
-
Handyman Cartridge Caulking Gun Type 20Vendor:Adheseal ToolsA steel-framed manual cartridge gun for maintenance sealing: bathroom silicone, acrylic gaps, trim adhesive. The rigid cradle stops the cartridge sliding under pressure, so the bead stays even for the length of the tube.A step up from plastic guns for toolboxes that get used...
- $21.99
- $21.99
- Unit price
- per
-
Single Edge Scraper Blades - 0.23mm (100 Pack)Vendor:SterlingSingle-edge scraper blades, 0.23mm carbon steel, 100 to a box. The standard glass scraper blade: the reinforced spine lets you press hard without the blade folding, and the ground edge lifts cured silicone and paint off glass in one pass.Thin enough to track a...
- From $25.09
- From $25.09
- Unit price
- per
Frequently Asked Questions
Which epoxy for joining benchtop slabs?
Megapoxy 69 or PM two-part epoxy. Pigment them to the stone, apply to clean dry faces, clamp flat, then dress the seam once cured.
What cleans acetone-safe stone surfaces?
Acetone or methylated spirits on a clean rag removes marker, adhesive residue, and grease from engineered stone before seaming. Test delicate surfaces first. Dry-fit every piece first so seams line up before any adhesive is mixed.
How do I grab a splashback without fixings?
MS 609 fast grab adhesive. It holds immediately so no props are needed, and stays flexible with bench movement. Dry-fit every piece first so seams line up before any adhesive is mixed.
What fills chips around sink cut-outs?
Pigmented Megapoxy PF flowed into the chip, then scraped flat and polished once hard. Dry-fit every piece first so seams line up before any adhesive is mixed.
Do you stock colour-matched silicone for stone joints?
MC 228 multi-colour gap sealant covers common stone tones. Order a colour chart first to match the slab. Dry-fit every piece first so seams line up before any adhesive is mixed.