11
At a Glance: Key Applications
Use Adheseal Acetone for: cleaning epoxy tools, dissolving adhesives, thinning polyester resin, fibreglass repair prep, degreasing PU/PVC surfaces
Adheseal Acetone: A Technical Overview
Adheseal Acetone is a high-purity, water-thin solvent engineered for professional degreasing, tool cleaning, and resin thinning. It rapidly dissolves polyurethane, PVC and epoxy-based adhesives and is a go-to choice for trades working with fibreglass, automotive resins, or composite surfaces. Its ultra-fast evaporation rate ensures minimal residue and faster turnaround. Completely VOC-exempt and water-white in appearance, it’s an essential surface prep and cleaning solvent on any job site.
Core Features & Specifications
- Fast-drying solvent—minimises wait times during adhesive removal and degreasing
- Water-white clarity and extremely low residue—ideal for sensitive prep surfaces
- Non-viscous for deep penetration into tight joints or applicator tips
- Compatible with most epoxy, PU, PVC, fibreglass, and polyester resin systems
- VOC content: 0 – Exempt category under Australian standards
- Specific Gravity: Approx. 0.792 – ultra-lightweight for efficient wipe-off
The Adheseal Acetone Advantage
- Excellent compatibility with fibreglass and marine resin systems
- Removes uncured adhesives fast, reducing clean-up labour
- Zero VOCs makes it safer and more environmentally friendly
- Dissolves a wide range of residues—resins, waxes, oils, gums, and dyes
- Blends with alcohols, ethers and water—high versatility in field use
Coverage Rate & Yield
Coverage varies with application technique. For tool cleaning or surface degreasing, a few ounces typically clean large areas effectively. Minimal product required per application due to rapid evaporation and spread.
Application information cards
Required Tools & Equipment
- Clean lint-free rags
- Plastic/glass containers (non-polystyrene)
- Brushes or spray bottles
- Ventilated workspace or extraction fan
Pro Tips for Best Results
- Use small amounts at a time to avoid vapour build-up
- Avoid contact with polystyrene-based parts or foams
- Work quickly to maximise cleaning power before flash-off
Avoiding Common Issues
- Do not store near ignition sources—extremely flammable
- Ensure surface is completely dry before applying adhesives
Storage & Shelf Life Considerations
Store in a cool, dry, well-ventilated area below 30°C. Keep container tightly sealed when not in use. Shelf life: 24 months in unopened original packaging. Avoid sources of ignition.
Certifications & Regulatory Compliance
VOC Exempt. Classified as a Dangerous Good (Hazard Class III). Consult SDS for additional workplace handling guidelines in line with WorkSafe Australia.
Frequently Asked Questions About Adheseal Acetone
Q: Can I use Adheseal Acetone to clean epoxy applicators?
A: Yes. Its rapid-dissolving capability makes it highly effective for cleaning uncured epoxy from tools and mixing vessels. Always use in a well-ventilated area to avoid vapour build-up.
Q: Is this product safe for polystyrene foam substrates?
A: No. Acetone will dissolve polystyrene foam. Avoid using it for cleaning or thinning near foam insulation or foam mouldings.
Q: What is the evaporation rate of Adheseal Acetone?
A: It evaporates very rapidly—slower than ether but significantly faster than most commercial solvents. This makes it ideal for quick drying without residue.
Q: Can I use it to thin polyester or PU adhesives?
A: Absolutely. It’s compatible with acetone-based PU and PVC adhesives and polyester resins used in marine or auto fibreglass applications.
Q: Is this solvent environmentally friendly?
A: Yes. It contains zero VOCs and is considered VOC-exempt under Australian emission standards, making it suitable for environmentally sensitive applications.
Applications & Benefits
| Application / Use Case | Key Benefit | Primary Trades |
|---|---|---|
| Epoxy applicator clean-up | Removes uncured resin fast without residue | Fibreglassers, marine repair, auto body trades |
| Thinning polyester resin | Improves flow and wet-out for fibreglass repair | Boilermakers, automotive trades |
| PVC/PU adhesive clean-up | Removes stubborn glue residues | Glaziers, builders, joiners |
| Surface degreasing | Ensures clean bonding surfaces | All trades |
Applying Adheseal Acetone: Protocols & Best Practices
General Application Steps:- Preparation: Work in a well-ventilated space. Identify surfaces that need degreasing or adhesive removal.
- Application: Apply a small quantity using a lint-free cloth or brush. Avoid overuse to prevent vapour accumulation.
- Wipe-Off: Use clean dry cloths for residue removal. For precision work, use a cotton bud or syringe applicator.
- Dry Time: Evaporates within seconds depending on ambient temperature. Wait before applying new adhesive layers.
Limitations & Safety
Product limitations and safety information
Limitations:
- Not suitable for polystyrene foam—causes chemical damage
- Highly flammable—keep away from heat, sparks and open flame
- Do not use in confined spaces without ventilation
Safety & Handling:
- PPE: Nitrile gloves, safety goggles, solvent-resistant apron
- Ventilation: Use in well-ventilated areas only
- Handling: Use small quantities to limit vapour exposure
- First Aid: If inhaled, move to fresh air. If in eyes, flush for 15 mins. Seek medical help if irritation persists.
Adheseal Acetone Adhesion & Preparation Guide
-
Substrate preparation guidelines
- Metal: Wipe with lint-free cloth soaked in acetone to remove oils – Primer: No primer required.
- Fibreglass: Clean thoroughly with acetone to prep for resin or adhesive – Primer: No primer required.
- Glass: Wipe clean and allow full evaporation – Primer: No primer required.
- PU or PVC Residue: Scrub with acetone to soften before removal – Primer: Not applicable.
- Choosing a selection results in a full page refresh.