Use Diggers Acetone when you need a fast-evaporating solvent for cleaning PVC pipe before gluing, removing stubborn adhesives or cleaning fibreglass tools. It dries quickly, mixes completely with water and is intended for cleaning rather than surface coating or protection.
Some jobs fail before they begin because grease, resin, wax or adhesive residue is left on the surface. Diggers Acetone is formulated to remove these contaminants quickly, giving PVC joints, fibreglass tools and equipment a clean surface before the next step.
Its high evaporation rate helps reduce waiting time during preparation, while complete water miscibility makes it suitable for a wide range of workshop and site cleaning tasks.
Flash point: -18°C. The low flash point means the product is highly flammable and must always be kept away from ignition sources.
Relative evaporation rate: 700. Fast evaporation helps cleaned surfaces dry quickly before gluing or further work.
Specific gravity: 0.79. As a light solvent, it spreads easily during cleaning without leaving heavy residue.
Boiling point: 56°C. The solvent evaporates readily under normal working conditions, making it well suited to cleaning applications.
Diggers Acetone is commonly used for:
For PVC installations, use Diggers Acetone during the preparation stage. Wipe the pipe and fitting with a clean rag soaked in acetone before applying PVC solvent cement. For fibreglass work, clean brushes immediately after use to reduce resin build-up and extend tool life.
This product is classified as highly flammable. Store in a cool, dry location away from direct sunlight and all ignition sources. Wear suitable protective clothing, gloves and eye or face protection during use.
Yes. Diggers Acetone is suitable for cleaning PVC pipes and joints before applying PVC solvent cement. Wipe the surfaces with a clean rag soaked in acetone before gluing to remove contamination.
Yes. It is intended for removing difficult adhesives, waxes, resins and even Superglue residue. Always test sensitive materials before full application.
No. Diggers Acetone should not be used on painted surfaces because it may damage the finish. Always test a small area first when material compatibility is uncertain.
Yes. Diggers Acetone is a very strong solvent and may damage some plastics. It should not be used on Perspex and should always be tested on an inconspicuous area first.
Its high evaporation rate allows solvent to flash off rapidly after cleaning. This helps reduce waiting time before the next stage of the job.
| Application | Key benefit | Primary trades |
|---|---|---|
| Cleaning PVC pipes and joints before gluing | Removes surface contamination and evaporates quickly before the gluing stage. | Plumbers and pipe installers |
| Cleaning fibreglass brushes and tools | Removes fibreglass resin residue before or after use. | Fibreglass fabricators and repairers |
| Removing adhesive and Superglue residue | Strong solvent action helps break down difficult adhesive residue. | Maintenance technicians and general trades |
| Removing resins and waxes | Provides a fast-drying clean-up solvent for stubborn residues. | Workshop, maintenance and fabrication trades |
| General DIY clean-up | Mixes completely with water and has a high evaporation rate for quick drying. | DIY users and property maintenance workers |
Wear suitable protective clothing, gloves and eye or face protection while handling the product.
Store in a cool, dry place away from direct sunlight, naked flames and other ignition sources. Refer to the current safety data sheet for complete handling and disposal requirements.
This guide covers surfaces specifically mentioned by the manufacturer where cleaning is part of the preparation process.
Surface prep: Wipe the pipe and fitting thoroughly using a clean rag soaked with Diggers Acetone before applying PVC solvent cement. Remove dirt, grease and other contamination.
Primer: Not required. Diggers Acetone is used as the cleaning solvent before gluing.
Surface prep: Clean brushes immediately before or after use to remove fibreglass resin and solvent-based glue residue.
Primer: Not required. The product is used solely as a cleaning solvent.
| Property | Value |
|---|---|
| Product Type | Clean-up solvent |
| Appearance | Colourless clear liquid |
| Specific Gravity | 0.79 |
| Flash Point | -18°C |
| Boiling Point | 56°C |
| Relative Evaporation Rate | 700 |
| Water Miscibility | Mixes completely with water |
| Sizes | 1 L, 20 L |
Here are some common examples on where Diggers Acetone used by our customers.
