-
Megapoxy HTVendor:
Use Megapoxy HT for high-strength concrete repairs and steel anchoring in wet or harsh conditions. It delivers 100 MPa compressive strength and 36 MPa concrete bond, even resisting hydrogen sulphide.- From $197.39
- From $197.39
- Unit price
- per
-
Megapoxy HXVendor:
Use Megapoxy HX for deep penetration into fine concrete cracks or porous substrates. Its extra low 200 cps viscosity ensures full repair, delivering a 140 MPa compressive strength with a 60-minute work time.
- From $203.94
- From $203.94
- Unit price
- per
-
Megapoxy 132Vendor:
Use Megapoxy 132 for high-performance epoxy floor coating in food processing, commercial kitchens, and industrial settings. This solvent-free, low VOC coating meets AS 4020:2018 Potable Water Approval and offers 120MPa ultimate compressive strength for demanding environments.
- From $195.36
- From $195.36
- Unit price
- per
-
Megapoxy 154Vendor:
Use Megapoxy 154 for priming and sealing concrete and masonry, especially on damp surfaces, to create a tough, chemical-resistant coating that handles foot and light vehicular traffic. Its water-based formulation provides excellent adhesion and penetration while serving as a moisture barrier.
- $700.00
- $700.00
- Unit price
- per
-
Megapoxy MCVendor:
Use Megapoxy MC for heavy-duty, chemical-resistant coating on concrete and steel, offering 100% solids, excellent abrasion resistance, and VOC-free hygienic protection in aggressive environments. Its high bond strength (>3Mpa concrete, 13Mpa steel) ensures lasting performance where other coatings fail.
- From $173.63
- From $173.63
- Unit price
- per
-
Megapoxy 206 UltraVendor:
Use Megapoxy 206 Ultra for heavy-duty civil engineering grouting, pile repairs, and machinery installations. It delivers 115 MPa compressive strength, bonds aggressively to concrete and steel, and complies with AS/NZS 4020 for drinking water contact, even curing reliably in damp conditions.
- From $159.57
- From $159.57
- Unit price
- per
-
Megapoxy LVSVendor:
Use Megapoxy LVS to penetrate, seal, and prime porous concrete, timber, and masonry. Its low viscosity ensures deep hardening, providing over 3MPa bond strength to concrete and chemical resistance for critical floor coating systems.
- From $216.72
- From $216.72
- Unit price
- per
-
Megapoxy 34Vendor:
Use Megapoxy 34 for high-performance electrical encapsulation and cable jointing where AS3100 compliance and a 150°C peak service temperature are critical. It delivers 315 kV/cm dielectric strength for demanding applications.
- From $152.50
- From $152.50
- Unit price
- per
-
Megapoxy 36 DuoMixVendor:
Use Megapoxy 36 DuoMix for rapid bonding of road markers, parking sensors, and carpark stops to bitumen and concrete. It cures to a 7.5 MPa bond strength in 1 hour at 25°C, minimising traffic disruption.
- From $81.17
- From $81.17
- Unit price
- per
-
Everflex Primer WBPVendor:
Use Primer WBP for preparing porous concrete and screeds for Adheseal water-based membranes. It beds down dust and ensures strong adhesion, meeting Green Star criteria with very low VOCs.- From $48.26
- From $48.26
- Unit price
- per
-
Mapei Eco Prim T Plus PrimerVendor:
Solvent-free acrylic primer with excellent adhesion, flexibility, and water resistance. Suitable for concrete, ceramic, wood, and other internal flooring substrates.- From $103.16
- From $103.16
- Unit price
- per
-
Everflex VBS Water-based Epoxy PrimerVendor:
Use Everflex VBS as a 2-part water-based epoxy primer and negative pressure vapour barrier for damp or green concrete. It withstands up to 25m (250 kPa) hydrostatic pressure and allows overcoating in 4-24 hours, preventing moisture-related system failures and accelerating project timelines.
- $440.44
- $440.44
- Unit price
- per
-
Everflex WPM Elastomeric Waterproof MembraneVendor:
Use Everflex WPM for under-tile waterproofing of wet areas and balconies, meeting AS4858 Class III and AS4654.1 standards. Its rapid drying and no re-emulsification formula ensures reliable, compliant results before tiling.
- $176.09
- $176.09
- Unit price
- per
-
Everflex WPUV Elastomeric Waterproof MembraneVendor:
Use Everflex WPUV for compliant, UV-exposed waterproofing on roofs, balconies, and wet areas. Its Class 3 elastomeric formulation withstands maintenance foot traffic and will not re-emulsify, ensuring long-term performance.
- $177.01
- $177.01
- Unit price
- per
-
Duram Azcothane ReoVendor:
Use Duram Azcothane Reo for protected wet area and balcony waterproofing where AS 4858 compliance is required. Its internal microfibre reinforcement provides 311% elongation and passes cyclic movement tests, allowing for direct stick tiling without external fabric in most cases.- $167.05
- $167.05
- Unit price
- per
-
Sikalastic®-1K MortarVendor:
Use Sikalastic-1K for flexible waterproofing and concrete protection. It provides crack-bridging ability up to 0.75 mm and resists negative pressure up to 2.5 bar for 72 hours, offering certified performance for drinking water contact and external membranes.- $213.07
- $213.07
- Unit price
- per
-
EverKrete PrimerVendor:EverKreteUse EverKrete Primer for critical concrete and steel preparation where a strong bond, vapour barrier, and outgassing control are essential. This single-component, fast-drying primer ensures optimal adhesion for EverKrete repair mortars and protects against corrosion and moisture.
- From $30.65
- From $30.65
- Unit price
- per
-
Everbond Plastabond PVAVendor:
Enhance mortar and render performance with Plastabond – a PVA-based bonding agent delivering improved adhesion, reduced shrinkage, and chemical resistance.
- From $70.46
- From $70.46
- Unit price
- per
-
Open Cell Backing Rod - RoundVendor:
Use Adheseal Open Cell Backing Rod to prevent sealant gassing and three-sided adhesion in expansion joints. Its breathable polyurethane foam ensures faster, more complete sealant curing, critical for long-term performance across a wide range of cold and hot pour sealants.
- From $138.36
- From $138.36
- Unit price
- per
-
Open Cell Backing Rod - SquareVendor:
Square Open Cell Backing Rod is a breathable, non-gassing foam for joint sealing. It prevents 3-sided adhesion, supports consistent sealant shape, and is compatible with various sealants. Ideal for expansion joints with square or rectangular profiles.
- From $3.06
- From $3.06
- Unit price
- per
-
Adheseal Backing Rod Closed Cell - RoundVendor:
Adheseal Closed Cell Backing Rod is a high-quality polyethylene foam filler designed for construction joints, providing excellent support and preventing 3-sided adhesion for sealants.
- From $12.30
- From $12.30
- Unit price
- per
-
Biyseal Bitumen Impregnated FoamVendor:
Biyseal Polyurethane Impregnated Foam delivers a reliable, long-lasting seal for expansion joints and weatherproofing, adapting to various environmental conditions.
- From $134.19
- From $134.19
- Unit price
- per
-
Aluminium AnglesVendor:
Use Aluminium Angles for lightweight structural framing and fabrication. The 6060 T5 alloy offers a high strength-to-weight ratio, excellent weldability, and superior corrosion resistance.
- From $7.46
- From $7.46
- Unit price
- per
-
Buzon DPH-5 Adjustable Pedestal (100-175mm)Vendor:
The Buzon DPH-5 Adjustable Pedestal, adjustable from 100 to 175mm, is a durable solution for raised outdoor flooring with integrated slope correction.- $15.18
- $15.18
- Unit price
- per
-
Buzon Spacer TabsVendor:
Use Buzon Spacer Tabs for consistent paver alignment and critical drainage in raised flooring systems. They clip onto Buzon pedestals without tools, preventing paver movement and surface pooling.
- From $0.68
- From $0.68
- Unit price
- per
-
Adheseal AcetoneVendor:
Fast-evaporating acetone solvent for cleaning epoxy tools and thinning adhesives. Ideal for fibreglass, PU, and PVC work. Safe with no VOCs.
- From $17.50
- From $17.50
- Unit price
- per
-
Adheseal Methylated Spirits 95%Vendor:
Use Adheseal Methylated Spirits 95% for reliable cleaning, surface prep, and thinning specific adhesives on non-sensitive surfaces. This highly flammable and toxic liquid requires strict safety measures and prior surface testing to prevent damage or hazard.
- $146.73
- $146.73
- Unit price
- per
-
Adheseal Xylene SolventVendor:
Xylene is a versatile solvent commonly used as a thinner and cleaning agent for solvent-based products. It is effective in removing grease, oil, and other contaminants, making it suitable for various industrial and professional applications.
- From $17.50
- From $17.50
- Unit price
- per
-
Adheseal Toluene SolventVendor:
Toluene: A highly effective solvent for professional adhesive removal, with strict safety guidelines.
- From $17.50
- From $17.50
- Unit price
- per
-
Industrial BrushVendor:
This cost-effective hog bristle brush with a wooden handle is perfect for demanding industrial and marine applications. Buy in bulk and save on various sizes
- From $1.00
- From $1.00
- Unit price
- per
-
Texas Safety GlassesVendor:
Ultra-lightweight safety glasses with anti-scratch lens, anti-fog coating, and 99.9% UV protection.- From $3.74
- From $3.74
- Unit price
- per
-
Corflute Protection BoardVendor:
Use Corflute Protection Board for reliable safeguarding of waterproofing membranes and finished surfaces. Its 2mm corrugated polypropylene construction delivers high resistance to puncture, impact, and abrasion, preventing costly site damage.
- From $6.74
- From $6.74
- Unit price
- per
-
Sunstate Dried Silica SandVendor:
Use GS-BW Silica Sand for applications requiring precise particle size and high purity, such as water filtration or glass manufacture. Its controlled grading (95% passing 0.425mm, 95% retained 0.105mm) and >99% SiO2 content deliver predictable performance, but strict dust control is essential to manage the inherent crystalline silica hazards.
- From $25.43
- From $25.43
- Unit price
- per
-
Adheseal EP Waterproofing SystemVendor:
Penetrating, non-film forming polyester-polymer treatment that waterproofs and hardens concrete, brick, render and most masonry from within. Spray applied at ~5–7 m²/L, passes negative hydrostatic pressure to 60 psi, paintable once dry.
- From $150.00
- From $150.00
- Unit price
- per
-
Duram S900Vendor:
Use Duram S900 for invisible, sub-surface weatherproofing of porous mineral substrates like concrete and sandstone. Its siloxane chemistry allows vapour diffusion while preventing water ingress and efflorescence, curing fully in 12-24 hours.
- $254.95
- $254.95
- Unit price
- per
-
Gripset Elastoproof B10 / B50Vendor:
Elastoproof B50 is a high-performance joint band for waterproofing detail work at junctions, corners, control and expansion joints. The central “Flexible Zone” accommodates movement in multiple directions with up to 100% elastic recovery, while the fleece edges embed into a wet liquid membrane to create a seamless, durable seal. Designed for trade use in commercial, industrial, and residential wet areas.- From $51.61
- From $51.61
- Unit price
- per
-
Gripset Elastoproof Prefabricated CornersVendor:
Use Gripset Elastoproof Prefabricated Corners to ensure a seamless, elastic seal at 90° and 270° corner intersections in waterproofing applications. These NBR rubber corners offer 100% elastic recovery and high tear resistance, specifically designed to integrate with Gripset membranes to prevent corner failures.
- $90.65
- $90.65
- Unit price
- per
-
Gripset 51 MembraneVendor:
Use Gripset 51 for flexible, solvent-free waterproofing of underground and external structures. Its >500% elongation bridges cracks, providing robust protection against water, rot, and corrosion in continuously damp environments.
- From $71.51
- From $71.51
- Unit price
- per
-
Gripset 2P Class II MembraneVendor:
Use Gripset 2P for critical waterproofing across internal/external wet areas, swimming pools, and potable water tanks. This two-part cementitious membrane is certified to AS/NZ 4020 for drinking water and provides Class II flexibility with fast re-coat times.
- $188.44
- $188.44
- Unit price
- per
-
Gripset GP PrimerVendor:
Use Gripset GP Primer for enhancing adhesion of Gripset membranes and tile adhesives on porous substrates. It dries in 30 minutes, covers 8-10m² per litre, and is crucial for preventing callbacks due to poor bonding.
- From $87.36
- From $87.36
- Unit price
- per
-
EverKrete Concrete Repair System Trade KitVendor:EverKreteUse EverKrete Concrete Repair System Trade Kit for rapid, high-strength concrete repairs. It achieves full traffic in 45-90 minutes at 25°C and offers over 70 MPa compressive strength, significantly reducing site downtime.
- $283.33
- $283.33
- Unit price
- per
-
EverKrete AcceleratorVendor:EverKreteEverKrete Accelerator speeds up the curing of EverKrete 102 resin, ideal for cold conditions and fast project turnaround.
- $37.50
- $37.50
- Unit price
- per
-
Mapei Mapegrout T40 MortarVendor:
Use Mapegrout T40 for R3 structural concrete repairs requiring medium mechanical performance. This 40 MPa, shrinkage-compensated, fibre-reinforced mortar applies without slump on vertical surfaces, ensuring durable and compliant repairs.
- $86.31
- $86.31
- Unit price
- per
-
Mapei UC LevellerVendor:
Use Mapei UC Leveller for rapid deep-fill levelling of interior floors up to 70mm. It achieves C25-F7 strength, allowing flooring installation in 24 hours and keeping projects on schedule.
- $46.76
- $46.76
- Unit price
- per
-
Buzon DPH-1 (18-28mm)Vendor:
Use Buzon DPH-1 for ultra-low profile paving support on rooftops, terraces, and pool decks. Its 18-28mm height adjustment range and 0-5% slope correction ensure precise levelling, preventing issues in tight clearance areas.
- From $3.66
- From $3.66
- Unit price
- per
-
Buzon DPH-2 Adjustable Pedestal (35-53mm)Vendor:
The Buzon DPH-2 adjustable pedestal (35-53mm) is ideal for raised flooring systems, offering weather resistance, chemical durability, and precise adjustment capabilities.
- From $7.14
- From $7.14
- Unit price
- per
-
Adheseal White SpiritsVendor:
White Spirits, also known as mineral turps, is a versatile and widely-used solvent in the Australian trades and construction industry
- $122.33
- $122.33
- Unit price
- per
-
Megapoxy ThinnersVendor:
Megapoxy Thinners: Hazardous solvent for thinning epoxy products. Flammable, harmful if inhaled or absorbed. Use with care.
- $221.95
- $221.95
- Unit price
- per
-
Gripset LS Trafficable CoatingVendor:
Use Gripset LS as a hard-wearing, non-slip top coat for external trafficable areas like roofs, podiums, and balconies. It provides excellent UV stability and ponding water resistance over suitable Gripset base liquid membranes, ensuring long-term system durability for light foot traffic.
- $230.09
- $230.09
- Unit price
- per
-
Gripset P39 MembraneVendor:
Use Gripset P39 for compliant waterproofing in permanently wet areas, exposed roofs, and under tile. Its hybrid polyurethane formula ensures >300% Class III flexibility and will not re-emulsify, meeting AS 4858 and AS 4654.1 standards.
- $232.47
- $232.47
- Unit price
- per
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
What's Popular
Vendor:
Use Adheseal PU15 for flexible, durable sealing of movement and connection joints up to ±30% and as an adhesive, offering excellent adhesion and weather resistance for confident, long-term performance.
- From $11.99
- From $11.99
- Unit price
- / per
Vendor:
Use Adheseal PU25FC for flexible sealing and bonding of movement joints in construction, marine, and manufacturing. It offers ±25% movement, fast curing at 3mm per day, AS/NZS 4020 potable water suitability, and is UV stable.
- From $11.12
- From $11.12
- Unit price
- / per
Vendor:
Use Adheseal PU50FC for high-strength, flexible structural bonding and demanding sealing jobs. It offers Shore A 45 hardness for anti-pick applications, withstands +/- 25% joint movement, and cures at 3mm per 24 hours.
- From $14.96
- From $14.96
- Unit price
- / per
Masonry Range
Concrete, blockwork, brick — masonry substrates demand products that bond, seal and hold up under real site conditions. This range covers structural repair mortars, polyurethane and silicone sealants, waterproofing membranes, tile adhesives, primers and backing rod — all selected for performance on masonry and concrete.Whether you're patching spalled concrete, sealing...
Concrete, blockwork, brick — masonry substrates demand products that bond, seal and hold up under real site conditions. This range covers structural repair mortars, polyurethane and silicone sealants, waterproofing membranes, tile adhesives, primers and backing rod — all selected for performance on masonry and concrete.
Whether you're patching spalled concrete, sealing expansion joints, waterproofing a retaining wall or fixing large-format tiles to blockwork, the right product depends on the substrate condition, movement requirements and exposure. Fast-setting repair mortars sit alongside high-movement sealants rated to ±50%, potable water certified options, and primers engineered for polyurethane membrane adhesion — so you can match the product to the spec, not the other way around.
Sidebar
BY ENVIRONMENT
BY PACKAGING
BY SUBSTRATE
BY APPLICATION
BY HANDLING NOTES
Frequently Asked Questions
Translation missing: en.t:sections.general.no_content
Recently Viewed Products
- Choosing a selection results in a full page refresh.