-
Everbond Plastabond PVAVendor:
For high-strength mortars, floor screeds, renders, and slurries requiring improved adhesion and durability, Everbond Plastabond PVA acts as a dual-purpose bonding agent and plasticising additive. This polyvinyl acetate resin water dispersion modifies sand, cement, and gypsum mixes to improve chemical resistance and lower water...- From $70.46
- From $70.46
- Unit price
- per
-
Ardex RA 88 Plus Multi-Purpose Epoxy Repair AdhesiveVendor:
For horizontal, vertical, and overhead concrete repairs, ARDEX RA 88 Plus is a non-drip, non-sag epoxy adhesive that fills holes, seals cracks, and sets anchor bolts. It is formulated to bond structurally to major construction substrates—including metal, concrete, brick, wood, stone, and block—and meets...- $143.73
- $143.73
- Unit price
- per
-
Gripset C-PlugVendor:
For active water leaks under pressure through holes, cracks, and openings in concrete and masonry, Gripset C-Plug forms an instant, non-shrink waterproof seal. This rapid-setting cementitious compound stops flowing water in underground car parks, basements, lift shafts, water tanks, and concrete pipes before curing...- From $51.96
- From $51.96
- Unit price
- per
-
Gripset 11Y AdmixtureVendor:
For cement screeds, renders, and patch mortars exposed to weather, continuous immersion, or underground dampness, Gripset 11Y is a concentrated SBR latex polymer admixture that improves adhesion, flexural strength, and water resistance. It prevents water-pathway failures in demanding wet areas, reduces the occurrence of...
- From $99.49
- From $99.49
- Unit price
- per
-
RLA Penapatch Fairing Coat MortarVendor:RLAFor thin-layer repairs over surface imperfections, RLA Penapatch Fairing Coat Mortar provides a smooth, fine-textured finish on concrete, masonry, and existing RLA mortars. Formulated with a blend of cement and polymers, this compound achieves rapid early strength with minimal shrinkage, producing a surface that...
- $78.94
- $78.94
- Unit price
- per
-
RLA Penapatch HB50 MortarVendor:RLAFor high-build structural concrete restoration on vertical, horizontal, or overhead faces, Penapatch HB50 Mortar provides a shrinkage-compensated, medium-weight repair barrier. It is formulated to reinstate structural integrity in damaged concrete panels and spalled areas caused by reinforcing steel corrosion, reaching a high ultimate compressive...
- $85.68
- $85.68
- Unit price
- per
-
RLA Penapatch HB80 MortarVendor:RLAFor structural repairs on concrete panels, spalled masonry, and corroded rebar, Penapatch HB80 Mortar is a shrinkage-compensated, polymer-modified structural mortar. It is formulated to achieve high-build vertical and overhead repairs without slumping, restoring structural integrity to damaged substrates while providing low permeability to protect...
- $97.41
- $97.41
- Unit price
- per
-
RLA Penapatch Panel LW MortarVendor:RLAFor patching repairs and covering metal joining plates in tilt-up or pre-cast panels, Penapatch Panel LW Mortar provides a lightweight, shrinkage-compensated option that eliminates the need for formwork. It is formulated to rebuild damaged concrete, masonry, steel, and rebar surfaces, achieving a four-hour fire...
- $75.23
- $75.23
- Unit price
- per
-
Mapei Mapegrout T40 MortarVendor:
For repairing degraded vertical or horizontal concrete surfaces, Mapegrout T40 Mortar provides a medium-strength, thixotropic system that can be applied to vertical faces and ceilings without slumping or requiring formwork. It is formulated to match the physical characteristics of medium-quality concrete, preventing differential movement...- $86.31
- $86.31
- Unit price
- per
-
Mapegrout Fast-Set RapidoVendor:
For rapid concrete repairs on exterior vertical or horizontal surfaces, Mapegrout Fast-Set Rapido provides a structural, shrink-compensated, and fibre-reinforced mortar that sets in 30 minutes. It is formulated for the fast restoration of deteriorated concrete structures, edges of beams, pillars, and balconies damaged by...
- $82.39
- $82.39
- Unit price
- per
-
Mapei Lamposilex (Waterplug)Vendor:
For stopping active water leaks under pressure in basements, subways, and concrete water tanks, Lamposilex provides an ultra-fast setting plug that halts water flow within minutes. This chloride-free hydraulic binder mixes with water to form a thixotropic paste that hangs on vertical surfaces without...
- From $49.53
- From $49.53
- Unit price
- per
-
Mapei Planicrete SPVendor:
Mapei Planicrete SP is a white, fluid SBR latex admixture for cement-based screeds, renders, thin smoothing layers and highly adhesive cement bonding slurries. Use it where the mix needs better adhesion, plasticity, thixotropy, water retention and workability. What it does Added to cement and...
- $144.73
- $144.73
- Unit price
- per
-
Armadillo DVendor:ArmadilloFor warehouse floors, manufacturing plants, and residential garages where dusting, rain damage, or weak mortar has compromised the concrete, Armadillo D penetrates the surface to increase abrasion resistance and seal the substrate. This water-based silicate compound chemically converts soft, porous calcium hydroxide into high-strength...
- $283.67
- $283.67
- Unit price
- per
-
Efflock Hydrophobic AdditiveVendor:EfflockFor bathroom tiling, balconies, pool surrounds, and stonemasonry where salt damp or calcium carbonate stains threaten the finish, Hydrophobic Additive provides permanent protection by treating the entire concrete mass. Added directly to the mix, this water-based liquid creates an invisible hydrophobic molecular structure within...
- From $102.17
- From $102.17
- Unit price
- per
Frequently Asked Questions
What can I repair with these products?
You can repair damaged concrete, masonry, panels, and mortar. Fill holes, stop local leaks, and improve repair mixes. The range includes repair mortars, epoxy repair compounds, hydraulic plugs, polymer additives, and a concrete densifier.
When do I use a repair mortar instead of epoxy?
Use a repair mortar for cement-based reinstatement, fairing, high-build repairs, and concrete restoration. Use an epoxy repair compound for structural bonding, crack filling, anchor bolts, or damp-condition repairs. Match the product to the substrate, loading, moisture, and finish you need.
Are there polymer additives in this range?
Yes. Everbond Plastabond, Gripset 11Y, and Mapei Planicrete SP modify cement, sand, renders, screeds, or patch mortars. They improve adhesion, flexibility, water resistance, or durability. Check the mix ratio, substrate, and cure requirements on the product label before you batch.
What does Armadillo D do?
Armadillo D hardens and protects weak or dusting concrete. It is a water-based silicate that soaks into the surface, raises abrasion resistance, cuts dusting, and lowers liquid absorption. It is not a rising-damp barrier. Do not use it to control rising moisture.
Can I stop an active water leak with these products?
Gripset C-Plug and Mapei Lamposilex stop local leaks through holes, cracks, or concrete structures. They are rapid cementitious plugs for active water. They are not a full waterproofing system and do not replace injected crack repair.
What is the difference between Mapegrout Rapido and Mapegrout T40?
Both are fast-setting repair grouts. Mapegrout Rapido sets quickly for urgent repairs and patching. Mapegrout T40 is a high-strength thixotropic grout for vertical or overhead concrete repair. Choose Rapido for speed, T40 for strength on vertical surfaces.