-
EverKrete Concrete Repair System Trade KitVendor:EverKreteUse EverKrete Concrete Repair System Trade Kit for rapid, high-strength concrete repairs. It achieves full traffic in 45-90 minutes at 25°C and offers over 70 MPa compressive strength, significantly reducing site downtime.
- $283.33
- $283.33
- Unit price
- per
-
EverKrete 102Vendor:EverKreteUse EverKrete 102 as a flexible thermoset vinyl polymer binder for robust concrete mortars and slip-resistant overlays, offering fast cure and reliable priming for concrete from -18°C to +15°C.
- From $213.97
- From $213.97
- Unit price
- per
-
EverKrete PrimerVendor:EverKreteUse EverKrete Primer for critical concrete and steel preparation where a strong bond, vapour barrier, and outgassing control are essential. This single-component, fast-drying primer ensures optimal adhesion for EverKrete repair mortars and protects against corrosion and moisture.
- From $30.65
- From $30.65
- Unit price
- per
-
Everflex Multi-Prime Acrylic PrimerVendor:
Use Everflex Multi-Prime for preparing both porous and non-porous substrates before applying waterproofing membranes, tile adhesives, or levelling compounds. It offers rapid 1-hour drying and system compatibility, reducing callbacks and speeding up project timelines.- From $71.69
- From $71.69
- Unit price
- per
-
EverKrete AcceleratorVendor:EverKreteEverKrete Accelerator speeds up the curing of EverKrete 102 resin, ideal for cold conditions and fast project turnaround.
- $37.50
- $37.50
- Unit price
- per
-
Gripset C-Bed Cementitious ScreedVendor:
Use Gripset C-Bed for stable, shrinkage-compensated tile beds that are trafficable in 24 hours. Its polymer-modified formulation reduces efflorescence and bonds reliably to primed substrates and membranes.- $29.09
- $29.09
- Unit price
- per
-
Gripset C-PlugVendor:
Use Gripset C-PLUG to instantly stop active water leaks in concrete and masonry. It sets in 30-60 seconds, cures to 35 MPa, and is safe for potable water.
- From $51.96
- From $51.96
- Unit price
- per
-
Gripset C-1P Cementitious MembraneVendor:
Use Gripset C-1P for demanding waterproofing jobs, resisting up to 5 bar positive and 1.5 bar negative hydrostatic pressure. This flexible, fibre-reinforced cementitious membrane bridges cracks up to 0.75 mm and holds AS 40200 potable water approval.
- $166.30
- $166.30
- Unit price
- per
-
Gripset 11Y AdmixtureVendor:
Use Gripset 11Y to enhance cement-based compounds for demanding conditions, providing superior adhesion and water resistance for screeds, renders, and repair mortars in continuous immersion or freeze/thaw environments.
- From $99.49
- From $99.49
- Unit price
- per
-
RLA Penapatch Panel LW MortarVendor:RLAUse RLA Penapatch Panel LW for fire-rated, non-structural concrete repairs on vertical and overhead surfaces. It provides a 4-hour fire rating to AS1530.4 at 35mm, allows single-application builds up to 100mm overhead, and achieves 20 MPa compressive strength.
- $75.23
- $75.23
- Unit price
- per
-
RLA Penapatch Fairing Coat MortarVendor:RLAUse RLA Penapatch Fairing Coat Mortar for thin-layer concrete repairs up to 5mm, providing a smooth, durable finish. Its fast 25-minute working time and negligible shrinkage ensure efficient, quality results for exposed or over-coated applications.
- $78.94
- $78.94
- Unit price
- per
-
RLA TruLevel TuffTopVendor:RLAUse RLA TruLevel TuffTop for rapid, high-strength internal and external concrete levelling from 3-30mm, allowing foot traffic in 3-4 hours and floor coverings in 18 hours, certified CT-C40-F8 for commercial demands.
- $82.01
- $82.01
- Unit price
- per
-
RLA TruLevel Fine FinishVendor:RLAUse RLA TruLevel Fine Finish for rapid skim smoothing of internal concrete and masonry substrates up to 3mm thick. It provides a smooth base ready for floor coverings in just 20 minutes, ensuring quick project turnaround without compromise.
- From $126.07
- From $126.07
- Unit price
- per
-
RLA Aftek TruLevel BulkFill UTVendor:RLAUse RLA TruLevel BulkFill UT to correct deep imperfections on internal concrete substrates, achieving a strong, level surface from 3mm to 70mm. It provides a robust, pumpable base with high mechanical resistance, ready for most floor coverings in 24-36 hours.
- $47.39
- $47.39
- Unit price
- per
-
RLA Penaflow Panel GroutVendor:RLAUse RLA Penaflow Panel Grout for high-strength, non-shrink structural support, achieving over 55 MPa compressive strength at 28 days with controlled plastic state expansion for reliable load transfer.
- $23.24
- $23.24
- Unit price
- per
-
RLA Penapatch HB80 MortarVendor:RLAUse RLA Penapatch HB80 for high-strength structural concrete repairs requiring up to 68 MPa compressive strength. It allows high-build applications in a single pass and offers excellent resistance to chloride attack and carbonation, making it suitable for durable long-term reinstatement.
- $97.41
- $97.41
- Unit price
- per
-
RLA Penapatch HB50 MortarVendor:RLAPenapatch HB50 is a polymer-modified, fibre-reinforced, shrinkage-compensated structural repair mortar formulated for vertical, overhead and horizontal concrete repairs. Achieve high build in a single pass with excellent adhesion, low permeability and high ultimate strength — just add water.
- $85.68
- $85.68
- Unit price
- per
-
Cement Australia Sand & Cement (Screed)Vendor:Cement AustraliaCement Australia Sand & Cement (Screed) is a pre-blended, ready-to-use mortar mix. Simply add water for a consistent and convenient solution for various handyman, landscaping, plumbing, and repair applications.
- $12.95
- $12.95
- Unit price
- per
-
Megapoxy 69Vendor:
Use Megapoxy 69 for structural bonding and filling where high strength and impact resistance are critical. This non-sag epoxy delivers 120MPa compressive strength and 17MPa steel-to-steel lap shear, ensuring permanent bonds in civil, marine, and heavy-duty applications.- From $85.39
- From $85.39
- Unit price
- per
-
Megapoxy P1Vendor:
Megapoxy P1 is a professional two-component epoxy paste adhesive engineered for high-strength structural bonding and repair. With a user-friendly 1:1 mix ratio and exceptional compressive strength, it provides a permanent, waterproof, and chemical-resistant bond for concrete, metal, and stone.
- From $84.10
- From $84.10
- Unit price
- per
-
Megapoxy PMVendor:
Use Megapoxy PM for non-sag, high-strength bonding and filling on vertical or overhead surfaces, including natural stone where a non-staining finish is critical. It delivers 80 MPa compressive strength and cures reliably even in cold or damp conditions.
- From $80.50
- From $80.50
- Unit price
- per
-
Megapoxy PFVendor:
Use Megapoxy PF for rapid set, high-strength bonding and repairs on concrete, metal, and stone. It sets in 7 minutes, achieves 90% cure in 1 hour at 25°C, and offers 70 MPa compressive strength for demanding structural applications.
- From $106.84
- From $106.84
- Unit price
- per
-
Megapoxy HVendor:
Use Megapoxy H for high-strength concrete and steel repairs, especially where potable water contact or wet conditions are present. Its AS/NZS 4020:2018 compliance and hydrophilic properties ensure performance and peace of mind in critical infrastructure applications.
- From $193.22
- From $193.22
- Unit price
- per
-
Megapoxy HICBVendor:
Use Megapoxy HICB for heavy-duty backing and grouting in crushers and mills. Its 115 MPa compressive strength and 20 MPa steel bond provide critical impact and structural reinforcement, preventing movement and extending equipment life where standard grouts fail.
- $148.06
- $148.06
- Unit price
- per
-
Megapoxy HTVendor:
Use Megapoxy HT for high-strength concrete repairs and steel anchoring in wet or harsh conditions. It delivers 100 MPa compressive strength and 36 MPa concrete bond, even resisting hydrogen sulphide.
- From $197.39
- From $197.39
- Unit price
- per
-
Megapoxy HXVendor:
Use Megapoxy HX for deep penetration into fine concrete cracks or porous substrates. Its extra low 200 cps viscosity ensures full repair, delivering a 140 MPa compressive strength with a 60-minute work time.
- From $203.94
- From $203.94
- Unit price
- per
-
Megapoxy MCVendor:
Use Megapoxy MC for heavy-duty, chemical-resistant coating on concrete and steel, offering 100% solids, excellent abrasion resistance, and VOC-free hygienic protection in aggressive environments. Its high bond strength (>3Mpa concrete, 13Mpa steel) ensures lasting performance where other coatings fail.
- From $173.63
- From $173.63
- Unit price
- per
-
Megapoxy 206 UltraVendor:
Use Megapoxy 206 Ultra for heavy-duty civil engineering grouting, pile repairs, and machinery installations. It delivers 115 MPa compressive strength, bonds aggressively to concrete and steel, and complies with AS/NZS 4020 for drinking water contact, even curing reliably in damp conditions.
- From $159.57
- From $159.57
- Unit price
- per
-
Megapoxy Pigment PasteVendor:
Use Megapoxy Pigment Paste for tinting epoxy systems, ensuring durable and consistent colour. This low VOC, epoxy-compatible paste avoids compromising the resin's final performance, reducing the risk of rework.
- $51.10
- $51.10
- Unit price
- per
-
Mountain Grout Gel FoamVendor:Green Mountain InternationalUse Mountain Grout Gel Foam for active water leak repairs in concrete. Its hydrophilic chemistry ensures up to 25 times expansion and high elongation for durable, flexible seals, especially under continuous water exposure.
- From $180.40
- From $180.40
- Unit price
- per
-
Adheseal Backing Rod Closed Cell - RoundVendor:
Adheseal Closed Cell Backing Rod is a high-quality polyethylene foam filler designed for construction joints, providing excellent support and preventing 3-sided adhesion for sealants.
- From $12.30
- From $12.30
- Unit price
- per
-
Aluminium AnglesVendor:
Use Aluminium Angles for lightweight structural framing and fabrication. The 6060 T5 alloy offers a high strength-to-weight ratio, excellent weldability, and superior corrosion resistance.
- From $7.46
- From $7.46
- Unit price
- per
-
Sunstate Dried Silica SandVendor:
Use GS-BW Silica Sand for applications requiring precise particle size and high purity, such as water filtration or glass manufacture. Its controlled grading (95% passing 0.425mm, 95% retained 0.105mm) and >99% SiO2 content deliver predictable performance, but strict dust control is essential to manage the inherent crystalline silica hazards.
- From $25.43
- From $25.43
- Unit price
- per
-
Efflock Hydrophobic AdditiveVendor:EfflockUse Efflock Hydrophobic Additive to stop efflorescence and damp in cement-based materials like screeds, mortars, and concrete. This VOC-free, concentrated additive provides bulk hydrophobic protection throughout the material, reducing water absorption and often negating the need for a costly secondary membrane.
- From $102.17
- From $102.17
- Unit price
- per
-
Megapoxy MegabondVendor:
Use Megapoxy Megabond for high-strength structural bonding and repair of concrete, metal, and natural stone. It delivers 60MPa compressive strength, handles a 1:1 mix ratio, and will not stain light-coloured marbles.
- $500.93
- $500.93
- Unit price
- per
-
Megapoxy 108Vendor:
Use Megapoxy 108 for rapid, high-strength structural bonding and repair in civil engineering. It develops 95 MPa compressive strength in 2 hours, offers an ultimate 120 MPa, and cures in the presence of moisture.
- From $250.41
$0.00- From $250.41
- Unit price
- per
-
Megapoxy 254Vendor:
Use Megapoxy 254 for high-strength structural bonding and repairs on concrete, metal, and natural stone. It delivers 70 MPa compressive strength, ensures a non-staining finish on sensitive materials, and cures in cold, damp conditions, reducing callbacks from bond failure.
- $596.35
- $596.35
- Unit price
- per
-
Megapoxy LVSVendor:
Use Megapoxy LVS to penetrate, seal, and prime porous concrete, timber, and masonry. Its low viscosity ensures deep hardening, providing over 3MPa bond strength to concrete and chemical resistance for critical floor coating systems.
- From $216.72
- From $216.72
- Unit price
- per
-
Mountain Grout FlexibleVendor:Green Mountain InternationalUse Mountain Grout Flexible for permanent crack sealing in concrete infrastructure. This hydrophobic polyurethane expands up to 30 times into a closed-cell foam, remaining flexible (44% elongation) and resistant to wet/dry cycles without shrinkage.
- From $180.40
- From $180.40
- Unit price
- per
-
Mapei UC LevellerVendor:
Use Mapei UC Leveller for rapid deep-fill levelling of interior floors up to 70mm. It achieves C25-F7 strength, allowing flooring installation in 24 hours and keeping projects on schedule.- $46.76
- $46.76
- Unit price
- per
-
Mapei Mapegrout T40 MortarVendor:
Use Mapegrout T40 for R3 structural concrete repairs requiring medium mechanical performance. This 40 MPa, shrinkage-compensated, fibre-reinforced mortar applies without slump on vertical surfaces, ensuring durable and compliant repairs.
- $86.31
- $86.31
- Unit price
- per
-
Mapegrout Fast-Set RapidoVendor:
Use Mapegrout Fast-Set Rapido for rapid structural concrete repairs. It achieves over 10 MPa compressive strength in 3 hours, holds 20-25 mm vertically without slump, and is classified R3 for efficient site turnaround.
- $82.39
- $82.39
- Unit price
- per
-
Planitop Fine Finish MortarVendor:
Use Planitop Fine Finish for feather-edge skim coating and levelling concrete surfaces up to 3mm. It delivers a breathable, uniform finish that is paintable in 7 days, avoiding surface imperfections under coatings.
- $107.31
- $107.31
- Unit price
- per
-
Armadillo DVendor:ArmadilloUse Armadillo D to densify and dustproof concrete floors, chemically reacting with the substrate to create a harder, more abrasion-resistant surface. It is after-trades compatible and Green Star compliant for enhanced project outcomes.
- $283.67
- $283.67
- Unit price
- per
-
Everbond Plastabond PVAVendor:
Enhance mortar and render performance with Plastabond – a PVA-based bonding agent delivering improved adhesion, reduced shrinkage, and chemical resistance.
- From $70.46
- From $70.46
- Unit price
- per
-
Mapei Lamposilex (Waterplug)Vendor:
Use Mapei Lamposilex to instantly stop active water leaks in concrete and masonry. It sets in 90 seconds, withstands pressurised water, and is AS/NZS 4020:2018 certified for potable water contact.
- From $49.53
- From $49.53
- Unit price
- per
-
RLA Penatech HS GroutVendor:RLAUse RLA Penatech HS Grout for critical structural grouting from 10mm to 150mm, ensuring non-shrink performance with dual expansion and compressive strengths up to >85 MPa. It meets ASTM C1107-91 and handles dynamic loads, providing a reliable, stain-free solution.
- $53.15
- $53.15
- Unit price
- per
-
Megapoxy 63Vendor:
Use Megapoxy 63 for high-strength, non-shrinking epoxy bonding of stone and tile to masonry. It delivers mechanical strengths superior to concrete, ensuring durable, long-lasting connections.
- From $182.59
- From $182.59
- Unit price
- per
-
Mapei Mapecemp Pronto ScreedVendor:
Use Mapecem Pronto for rapid-set screeds where project timelines and moisture control are critical. It allows flooring installation in 24 hours with less than 2% residual moisture, ensuring predictable project scheduling.
- $34.30
- $34.30
- Unit price
- per
-
Mapei MapecempVendor:
Use Mapei Mapecemp for rapid-drying floor screeds ready for tiles in 3-4 hours and moisture-sensitive flooring in 24 hours with less than 2% residual moisture, preventing project delays and callbacks.
- $69.18
- $69.18
- Unit price
- per
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
What's Popular
Vendor:
Use Adheseal PU15 for flexible, durable sealing of movement and connection joints up to ±30% and as an adhesive, offering excellent adhesion and weather resistance for confident, long-term performance.
- From $11.99
- From $11.99
- Unit price
- / per
Vendor:
Use Adheseal PU25FC for flexible sealing and bonding of movement joints in construction, marine, and manufacturing. It offers ±25% movement, fast curing at 3mm per day, AS/NZS 4020 potable water suitability, and is UV stable.
- From $11.12
- From $11.12
- Unit price
- / per
Vendor:
Use Adheseal PU50FC for high-strength, flexible structural bonding and demanding sealing jobs. It offers Shore A 45 hardness for anti-pick applications, withstands +/- 25% joint movement, and cures at 3mm per 24 hours.
- From $14.96
- From $14.96
- Unit price
- / per
Concrete Preparation and Remedial
Concrete doesn't fix itself. Whether you're patching spalled columns, stopping active water leaks, levelling a slab for tiling, or priming before a membrane goes down — this range covers the remedial products that hold up after you leave site.From rapid-set repair mortars carrying traffic in under 90 minutes to non-shrink...
Concrete doesn't fix itself. Whether you're patching spalled columns, stopping active water leaks, levelling a slab for tiling, or priming before a membrane goes down — this range covers the remedial products that hold up after you leave site.
From rapid-set repair mortars carrying traffic in under 90 minutes to non-shrink structural grouts rated above 55 MPa, the range spans primers, repair compounds, levelling screeds and epoxy adhesives. Products are matched to substrate condition, structural demand, and exposure — because the wrong repair mortar on the wrong substrate is a callback waiting to happen.
Sidebar
BY ENVIRONMENT
BY PACKAGING
BY SUBSTRATE
BY APPLICATION
BY HANDLING NOTES
Frequently Asked Questions
Translation missing: en.t:sections.general.no_content
Recently Viewed Products
- Choosing a selection results in a full page refresh.