Products

Use Buzon U-WASHER to mechanically secure raised pavers against wind uplift. Made from corrosion-resistant Stainless Steel 316 (V4A), it ensures long-term stability for Buzon PB, DPH, and BC pedestal systems.

Cement Australia Sand & Cement (Screed) is a pre-blended, ready-to-use mortar mix. Simply add water for a consistent and convenient solution for various handyman, landscaping, plumbing, and repair applications.

Trade-grade cordless caulking gun for 600ml sausages. Features dual 20V lithium-ion batteries, LED work light, and variable speed control.

Use Corflute Protection Board for reliable safeguarding of waterproofing membranes and finished surfaces. Its 2mm corrugated polypropylene construction delivers high resistance to puncture, impact, and abrasion, preventing costly site damage.

The Adheseal Crack Injection Balloon is a precision tool designed for controlled crack injection in concrete structures. Featuring an expandable latex hose and a clear base for visibility, it ensures thorough resin penetration for durable repairs. Ideal for epoxy and polyurethane resin injection, it is perfect for structural repairs, water-retaining structures, and concrete pavements.

Fast-drying solvent for cleaning PVC pipe, fibreglass tools and difficult adhesive, resin and wax residue.

Specialty solvent for thinning and stripping solvent based acrylic sealers and removing grease, oil and dirt.

Use this Dished Metal Plunger for: replacement or maintenance of the plunger component in compatible Adheseal Sausage Gun Types 1, 3 and 5. Dished Metal Plunger for Adheseal Sausage Guns – Types 1, 3 & 5: A Product Overview The Adheseal Dished Metal Plunger...

Use these disposable overalls (XXL) for painting, general maintenance, and workshop tasks. They provide a lightweight, breathable barrier against paint, grease, and dust, ensuring your clothing stays clean and protected.

Dowsil 791 is a high-performance, one-part neutral-cure silicone weatherproofing sealant formulated for expansion, connection, and perimeter joints in curtain wall and façade applications. With ±50% movement capability and excellent UV/weather resistance, it bonds strongly to glass, aluminium, masonry, and metal substrates without primer on most surfaces. Available in multiple colours, it’s a go-to solution for glazing professionals and façade contractors.

Use DOWSIL™ 795 Silicone Building Sealant for both structural glazing and weather sealing applications. It offers ±50% joint movement capability and meets ASTM C 1184 for structural use, with proven non-staining performance on masonry.

Use DOWSIL™ 888 Silicone Joint Sealant for sealing concrete pavement joints, handling up to +100% / -50% movement with unprimed adhesion, and resisting weather and UV exposure.

Use DOWSIL™ 890-SL for sealing concrete to concrete and concrete to asphalt pavement joints. This self-leveling, ultra-low modulus silicone requires no primer on concrete or asphalt, tolerates +100%/-50% movement, and achieves skin-over in under an hour to minimise traffic disruption.

Eliminate lippage and keep tiles level with DTA Flat Out 1.5mm Tile Clips. Suitable for wall and floor tiles 2–12mm thick.

Use the DTA Silicone Remover Tool for precision mechanical stripping of cured silicone, acrylic, and adhesives. Its dual-action right-angle blade and ergonomic grip ensure efficient, damage-free surface preparation on hard substrates.

Use Duram 195 as a Class III elastomeric waterproofing membrane for non-exposed areas, providing 400% elongation and Green Star compliant low VOCs. It requires a dry substrate and must be covered or top-coated with Multithane ATC for UV exposure.

Use Duram Azcoseal as a clear penetrative sealer for porous surfaces or as a robust primer to enhance adhesion of Duram waterproofing membranes. It's touch dry in 1-2 hours, UV resistant, and uses cross-linking technology for a strong system bond.

Use Duram Azcothane Reo for protected wet area and balcony waterproofing where AS 4858 compliance is required. Its internal microfibre reinforcement provides 311% elongation and passes cyclic movement tests, allowing for direct stick tiling without external fabric in most cases.

Use Duram S900 for invisible, sub-surface weatherproofing of porous mineral substrates like concrete and sandstone. Its siloxane chemistry allows vapour diffusion while preventing water ingress and efflorescence, curing fully in 12-24 hours.

Use Efflock Hydrophobic Additive to stop efflorescence and damp in cement-based materials like screeds, mortars, and concrete. This VOC-free, concentrated additive provides bulk hydrophobic protection throughout the material, reducing water absorption and often negating the need for a costly secondary membrane.

Use Everbond 2P Crosslinker to upgrade Everbond 2P Contact Adhesive for high heat, strength, and water resistance, achieving bonds over 120°C and preventing premature failure.

Use Everbond Brush Contact for high-strength, fast-drying bonds on laminates, timber, and upholstery, providing reliable heat and water resistance with a 3-5 minute touch-dry time.

Use Everbond General Purpose PVA for reliable timber bonding in joinery and cabinetry. It provides strong, non-staining adhesion with options for accelerated thermo-curing, ensuring efficient and high-quality results on timber, veneers, and laminates.

Use Everbond Melamine PVA Adhesive for reliable, clear bonding of melamine faced board in cabinet and furniture construction. Its specific adhesion to melamine ensures strong, consistent joints that dry clear, avoiding bond failures common with general purpose glues.

Enhance mortar and render performance with Plastabond – a PVA-based bonding agent delivering improved adhesion, reduced shrinkage, and chemical resistance.

Use Everbond PVA Xlink 3 for water-resistant timber bonding in cabinetry, joinery, and laminating. Certified to AS 2754.2 and EN204, this self-crosslinking adhesive provides high strength and can accelerate production with hot pressing.

Use Everbond SP-230 for high-strength, heat-resistant contact bonding across a broad range of substrates like laminates, foams, and fabrics. Its fast 3-5 minute dry time speeds up fabrication, providing reliable performance where heat and moisture resistance are critical.

Use Styrobond ST for bonding sheet materials to expanded polystyrene foam without solvent attack. Its specialised formulation prevents foam degradation, offers 2.5 m² per litre spray coverage, and requires a minimum 700 Kg/m² pressure for strong bonds.

Use Everbond Ultra Clear Brush Contact Adhesive for fast, strong bonds on diverse substrates where invisible glue lines are critical. It offers a 3-5 minute dry time and high initial strength, making it ideal for upholstery and lamination where aesthetics and speed matter.

Use Everflex Aqua-Ban for NCC compliant under-tile waterproofing in wet areas and balconies. This Class III elastomeric membrane offers 391% elongation and rapid drying for confident, compliant installations ready for tiling in 48 hours.

Use Everflex Fire-Fill for fire-rated sealing of penetrations and expansion joints, offering up to 4 hours of fire resistance per AS1530.4 and AS4072.1, with ±20% joint movement.

Use Everflex WPUV for compliant Class 3 waterproofing on UV-exposed external and internal wet areas. This single-component, elastomeric membrane is tested to AS4858 and AS4654.1, remaining flexible and non-re-emulsifying even under full immersion after curing.

Use Everflex JS for high-performance joint sealing in exterior and interior applications. It accommodates +/- 50% movement, offers superior adhesion without priming for most substrates, and resists weathering and UV without cracking.

Use Everflex Multi-Prime for preparing both porous and non-porous substrates before applying waterproofing membranes, tile adhesives, or levelling compounds. It offers rapid 1-hour drying and system compatibility, reducing callbacks and speeding up project timelines.

Use Everflex Supaprime to ensure robust adhesion for Adheseal sealants and membranes on porous substrates like concrete and timber. Its rapid cure and deep penetration prevent costly delamination, providing a reliable bond for critical applications.

Use Primer WBP for preparing porous concrete and screeds for Adheseal water-based membranes. It beds down dust and ensures strong adhesion, meeting Green Star criteria with very low VOCs.

Use Adheseal PU-240 for high-strength, flexible sealing and bonding in demanding construction and marine applications. With +/- 25% movement capability and 35 Shore A hardness, it ensures a durable, waterproof, and abrasion-resistant joint.

Use Everflex VBS as a 2-part water-based epoxy primer and negative pressure vapour barrier for damp or green concrete. It withstands up to 25m (250 kPa) hydrostatic pressure and allows overcoating in 4-24 hours, preventing moisture-related system failures and accelerating project timelines.

Use Everflex WPM for under-tile waterproofing of wet areas and balconies, meeting AS4858 Class III and AS4654.1 standards. Its rapid drying and no re-emulsification formula ensures reliable, compliant results before tiling.

Use Everflex WPUV for compliant, UV-exposed waterproofing on roofs, balconies, and wet areas. Its Class 3 elastomeric formulation withstands maintenance foot traffic and will not re-emulsify, ensuring long-term performance.

Use EverKrete 102 as a flexible thermoset vinyl polymer binder for robust concrete mortars and slip-resistant overlays, offering fast cure and reliable priming for concrete from -18°C to +15°C.

EverKrete Accelerator speeds up the curing of EverKrete 102 resin, ideal for cold conditions and fast project turnaround.

Use EverKrete Concrete Repair System Trade Kit for rapid, high-strength concrete repairs. It achieves full traffic in 45-90 minutes at 25°C and offers over 70 MPa compressive strength, significantly reducing site downtime.

The Fatranyl PVC coated termination angles come in various different dimensions depending on the purpose and application of the Fatra PVC membrane system. Fatranyl PVC coated angles can alos be fabricated to any site specific dimensions upon request.

Use Fatrabond 1214 for roller-applied bonding of Fatrafol felt-backed roof membranes, delivering rapid hardening and preventing blistering with its solvent-free MCPU formulation.

Fatrafol 804 is a UV-resistant, unreinforced PVC waterproofing membrane designed for detailed finishing and joining within Fatrafol reinforced roofing systems. It's ideal for use on roofs and must be installed by trained professionals.

Use Fatrafol 807v for adhered roofing systems where its 120 g/m² non-woven PES-textile backing ensures a secure bond. It provides reliable, UV-resistant waterproofing for long-term performance.

Fatrafol 810v is a high-quality, reinforced PVC roofing membrane designed for single-ply flat roofing applications. It's UV resistant, mechanically anchored, and suitable for a wide range of projects.

Use Fibreglass Reinforcing Mat 225gsm for reinforcing corners and joints in waterproofing applications. Its 225gsm weight provides balanced strength and flexibility to prevent cracking and water intrusion at critical stress points.

Use the 125mm Floor / Wall Scraper for rapid removal of old adhesives and paint. Its high-carbon steel blade and 500mm handle provide leverage for efficient surface preparation.