Choose Diggers Xylene when solvent based acrylic (SBA) sealers need thinning, stripping or clean-up. Its high solvency power and mid-to-slow evaporation rate make it suitable for preparing and restoring sealed surfaces while providing a longer working time than fast-evaporating solvents.
Not every solvent is suitable for acrylic sealers. Diggers Xylene is formulated specifically for thinning solvent based acrylic sealers in accordance with the sealer manufacturer's instructions and for stripping existing SBA sealers when maintenance or re-coating is required.
It also removes grease, oil and dirt before surface preparation, helping restore a clean working surface before further treatment.
Flash point: 26°C. Although less volatile than acetone, xylene remains flammable and should always be kept away from ignition sources.
Boiling point: 136–145°C. The higher boiling range contributes to its mid-to-slow evaporation, giving more working time when thinning or stripping sealers.
Specific gravity: 0.87. Suitable for heavy-duty solvent cleaning and sealer maintenance applications.
High solvency power. Designed to dissolve solvent based acrylic sealers efficiently during thinning or removal.
When thinning sealers, always follow the sealer manufacturer's recommendations. For stripping sealers, saturate a lint-free cloth and wipe the surface using a clean section of cloth for each pass to avoid spreading dissolved sealer back onto the substrate.
Wear suitable protective clothing, gloves and eye or face protection when handling Diggers Xylene. Keep away from ignition sources and follow safe handling practices.
Diggers Xylene is primarily used for thinning and stripping solvent based acrylic (SBA) sealers. It can also remove grease, oil and dirt from suitable surfaces.
Yes. Always follow the sealer manufacturer's thinning instructions to achieve the correct mixing ratio and performance.
Yes. It is intended for stripping solvent based acrylic sealers. Test a small area first and use a clean section of cloth with each wipe.
No. Diggers Xylene should not be used on painted surfaces because it may damage the finish.
Its mid-to-slow evaporation rate provides a longer working time, making it better suited to thinning and stripping solvent based acrylic sealers.
| Application | Key benefit | Primary trades |
|---|---|---|
| Thinning solvent based acrylic sealers | Maintains the correct viscosity when mixed according to the sealer manufacturer's instructions. | Concrete sealers and flooring contractors |
| Stripping solvent based acrylic sealers | High solvency power helps dissolve existing acrylic sealer for maintenance and recoating. | Concrete restoration contractors |
| Removing grease, oil and dirt | Cleans suitable surfaces before further maintenance or treatment. | Maintenance contractors |
| Surface preparation | Helps prepare substrates before applying compatible solvent based sealer systems. | Decorative concrete installers |
| Workshop cleaning | Provides a strong solvent for specialised cleaning tasks involving acrylic sealer residue. | Industrial maintenance and fabrication |
Wear suitable protective clothing, chemical resistant gloves and eye or face protection while handling the product.
Keep the container tightly closed and away from heat, sparks and other ignition sources. Refer to the current Safety Data Sheet for complete storage and handling requirements.
Dispose of contents and empty containers in accordance with local regulations. Refer to the Safety Data Sheet for disposal guidance.
This guide covers the substrates and applications specifically identified by the manufacturer.
Surface prep: Test a small area before beginning. Saturate a lint-free cloth with Diggers Xylene and wipe the surface, using a clean section of cloth for each pass when stripping existing sealer.
Primer: Not required. Diggers Xylene is used as a thinning or stripping solvent.
| Property | Value |
|---|---|
| Product Type | Specialty solvent |
| Appearance | Colourless liquid |
| Primary Uses | Thinning solvent based acrylic (SBA) sealers, Stripping solvent based acrylic (SBA) sealers, Removes grease, oil and dirt |
| Features | High solvency power, Mid-to-slow evaporation rate |
| Specific Gravity | 0.87 |
| Flash Point | 26°C |
| Boiling Point | 136–145°C |
| Flammability Limit | 1–7.1% |
| Sizes | 1 L, 20 L |
Here are some common examples on where Diggers Xylene used by our customers.
