For laminate and foam fabrication, auto upholstery, and transport vehicle assembly, Everbond Spray Contact SP-230 provides a fast-drying, highly heat-resistant bond. Formulated as a one-component polychloroprene adhesive, it delivers rapid initial grab and a strong bond capable of holding materials with high spring-back forces, such as cover trims and edging profiles.
Everbond Spray Contact SP-230 functions through contact bonding, requiring application to both mating surfaces. Once applied, the volatile solvents evaporate quickly during a short flash-off window. Bringing the two touch-dry surfaces together under strong, even pressure creates an immediate, high-strength bond that resists both heat and water. The formulation is also resistant to ageing, preserving bond integrity over time in demanding environments like vehicle cabins and furniture upholstery.
This adhesive bonds a broad range of materials and is suitable for:
Surfaces must be clean, dry, and free of oils, grease, and loose or friable materials. Apply Everbond Spray Contact SP-230 evenly to both surfaces using a suitable spray gun, rollcoater, tooth-comb, or brush. For porous or open-weave materials, spray application is recommended to prevent the adhesive from bleeding through the face of the substrate.
Wait 3 to 5 minutes until the adhesive is touch-dry before bringing the materials together with strong, even pressure. Once the container is opened, the material must be used within a short timeframe. Clean up wet adhesive tools and residue with acetone.
Everbond SP-230 offers very high heat and water resistance. This ensures durable bonds in applications such as automotive upholstery or laminate fabrication where elevated temperatures and incidental moisture are common.
No, do not use Everbond SP-230 in temperatures below 10°C. Condensed water can form on the adhesive, preventing a proper bond and leading to failure. Optimal application is at 20°C for all materials and ambient air.
Bond failure can occur from entrapped solvents, which result from applying excessive adhesive, allowing it to pool, or joining substrates too early. Always ensure the adhesive is touch dry (3-5 minutes) before bringing materials together with firm, even pressure.
Everbond SP-230 provides a strong bond across a broad range of substrates. These include timber, rubber sheets, plastic laminates, leather, fabrics, cloth-backed vinyl, MDF, particleboard, concrete, glass, and various metal sheets.
| Application | Key benefit | Primary trades |
|---|---|---|
| Laminate and foam fabrication | Delivers high initial strength and very short flash-off time, speeding up fabrication processes for various materials. | Shopfitters, cabinet makers, fabricators |
| Automotive upholstery | Provides a high heat and water-resistant bond for fabrics and foams, crucial for vehicle interiors exposed to temperature fluctuations. | Auto upholsterers, vehicle manufacturers |
| Furniture upholstery | Offers fast dry time and strong adhesion for diverse covering materials, enhancing production efficiency and bond durability. | Furniture makers, upholsterers |
| Transport vehicle interiors (e.g., PUR foams, textiles) | Handles materials with high spring-back forces and provides resistance against aging, ensuring lasting integrity for interior fit-outs. | Transport vehicle manufacturers, fit-out specialists |
| Bonding various construction substrates | Broad adhesion range for timber, MDF, concrete, and metals, useful for diverse internal construction and fit-out tasks. | Builders, carpenters, general contractors |
Signal Word: Danger
Everbond SP-230 is classified as a Hazardous Chemical and Dangerous Goods. It is a highly flammable liquid and vapour, causes skin and serious eye irritation, and may cause respiratory irritation, drowsiness, or dizziness. It is suspected of damaging fertility or the unborn child and may cause organ damage through prolonged or repeated exposure if inhaled. Refer to the SDS for complete information.
Wear safety shoes, overalls, chemical-resistant gloves (nitrile rubber recommended for intermittent contact), safety glasses, and a suitable respirator (organic vapour/particulate respirator meeting AS/NZS 1715 and AS/NZS 1716) if inhalation risk exists. Wash hands thoroughly after handling.
Ensure ventilation is adequate to maintain air concentrations below exposure standards. Use only in well-ventilated areas, with local exhaust ventilation, or while wearing appropriate respiratory protection.
Store in original, undamaged packaging, in a dry, cool, well-ventilated place, out of direct sunlight, between +10°C and +25°C. Keep away from foodstuffs, incompatible materials, heat, and ignition sources. Containers must be kept tightly closed and standing upright. Dispose of contents/container according to local, regional, and national regulations.
Proper surface preparation is critical for the reliable performance of Everbond SP-230. This guide outlines necessary steps for common materials.
Surface prep: Ensure all adhesion surfaces are clean, dry, and free of oils, fats, loose debris, and friable materials. This adhesive bonds best to sound, uncontaminated surfaces.
Primer: Not required. Everbond SP-230 is a contact adhesive, relying on direct adhesion to prepared surfaces.
Surface prep: Same as above. Ensure the material is structurally sound before application.
Primer: Not required. However, when applying to these materials, spray application is recommended to prevent the adhesive from bleeding through the substrate, maintaining bond integrity and appearance.
| Property | Value |
|---|---|
| Composition | One-component polychloroprene |
| Packaging | 4L Can, 20L Pail |
| Density (specific gravity) | 0.81 kg/L approximately |
| Consistency | 350 mPa.s approximately |
| Application Temperature | 10°C - 35°C |
| Storage Temperature | +10°C to +25°C |
| Solid Content by Mass | 17% approximately |
| Consumption | 6 - 8 m²/Litre |
| Shelf Life | 12 months |
| Clean Up | Acetone |
| Colours | Yellow |
| Form | Thin Liquid |
| Odour | Solvent odour |
| Solubility in Water | Immiscible |
| Vapour Pressure (20 °C) | 34.50 kPa at 15 °C |
| Flash Point | < -29 °C |
| Flammability Limits | 2.15 (V/V) - 13 (V/V) |
| Pour Point | > 0 °C |
| Boiling Point Range | 50-112 °C |
| Touch Dry Time | 3-5 minutes |
Here are some common examples on where Everbond Spray Contact SP-230 used by our customers.
