11
Adheseal Everbond SP-230 20L spray contact adhesive pail for fast-drying, heat-resistant bonding of foam, laminate, vinyl,...
Adheseal Everbond SP-230 20L spray contact adhesive pail for fast-drying, heat-resistant bonding of foam, laminate, vinyl,...

Everbond Spray Contact SP-230

Spray-grade contact adhesive for polyurethane foam, upholstery and laminate fabrication. Fast initial bond and even application with suitable spray equipment.

Vendor: Adheseal
SKU: CONTSP230N/20
Availability: In Stock
$196.61
$196.61
Prices do not include GST
Guaranteed safe checkout
  • Apple Pay
  • Google Pay
  • Mastercard
  • Shop Pay
  • Visa
  • Secure SSL encrypted checkout
  • Fast, tracked shipping
  • Easy returns & support
Shipping & Delivery

Flat-rate shipping $17.95 + GST (metro and standard zones). Excludes remote/regional/high-cost postcodes and certain items (DG, oversized, long-length, or bagged products 15 kg+). If your order includes any of these, we will contact you to arrange additional freight charges. Online purchases only.

Download Product Data

Download TDS Download SDS
Description  

Everbond SP-230 Spray Contact is a solvent-based polychloroprene adhesive formulated for spray application to compatible upholstery foam, flexible coverings and laminates. It is suited to workshop and production-line jobs where even coating and quick contact bonding help keep assembly moving.

SP-230 is particularly useful for flexible polyurethane foam and neoprene foam, including automotive upholstery and fabricated insulation components. It can be applied through suitable conventional or automated spray equipment. Unlike a one-sided construction adhesive, contact bonding normally requires coating both surfaces, waiting for sufficient flash-off and pressing them firmly together.

Where to use SP-230

  • Vehicle and caravan interiors: bonding compatible foam, upholstery textiles, insulated panels and lining materials.
  • Furniture upholstery: contact bonding flexible polyurethane foams and suitable covering materials.
  • Shopfitting and laminated panels: spraying suitable coverings and decorative laminates onto prepared substrates.
  • Flexible duct and fabricated trim: bonding appropriate insulation and textiles during workshop assembly.

Choosing spray or brush contact adhesive

Choose SP-230 for controlled spray coverage, particularly with foam or larger-area assembly. For smaller, brush-applied laminate and trim work, compare Everbond Brush Contact. For bonds where visible adhesive could spoil the finish, see Ultra Clear Brush Contact.

Apply in a ventilated area with the appropriate solvent-handling controls. Allow coatings to flash off rather than trapping solvent between impermeable surfaces. Test real substrate combinations, especially plastics and foam; do not use on expanded polystyrene. Avoid excessively humid conditions and use appropriate pressure during assembly.

Common Questions  

How is SP-230 applied?
Apply it to both mating surfaces, allow about 3 to 5 minutes until touch-dry, then press the parts together firmly.

What is the application temperature range?
Apply between 10°C and 35°C.

How much area does it cover?
Typical consumption is 6 to 8m² per litre.

Can I bond the parts while the adhesive is still wet?
No. Joining too early can trap solvent and weaken the bond.

Uses & Benefits  
One-component polychloroprene spray contact adhesive for laminates, foams, upholstery and transport assembly. Provides rapid initial grab after a short flash-off period. Dry time is about 3 to 5 minutes. Typical consumption is 6 to 8m² per litre. Application temperature range is 10°C to 35°C.
How To Apply  
Use on clean, dry surfaces free from oil, grease and loose material. Apply an even coat to both mating surfaces with a suitable spray gun, rollcoater, tooth-comb or brush. Spray application is preferred on porous or open-weave materials. Wait about 3 to 5 minutes until both coated surfaces are touch-dry. Bring the surfaces together and apply strong, even pressure. Clean uncured adhesive and tools with acetone.
Limitations and Safety Info  
Do not apply below 10°C. Do not join the surfaces before the adhesive is touch-dry. Do not apply excessive adhesive or allow it to pool. Entrapped solvent can weaken the bond or cause blistering. Test adhesion and compatibility on the actual substrates and job conditions before full application.
Suitable Substrates  
  • Timber, MDF and particleboard.
  • Rubber sheets and plastic laminates.
  • Leather, fabric, cloth-backed vinyl and polyester-backed vinyl.
  • PUR foam and upholstery materials.
  • Concrete, glass and metal sheet.

Everbond Spray Contact SP-230 Physical Properties

Everbond Spray Contact SP-230 Physical Properties
Property Value
Composition One-component polychloroprene
Specific Gravity 0.81 kg/L approximately
Consistency 350 mPa.s approximately
Application Temperature 10°C - 35°C
Storage Temperature +10°C to +25°C
Solid Content 17% approximately
Coverage Rate 6 - 8 m²/Litre
Shelf Life 12 months
Clean Up Acetone
Form Thin Liquid
Odour Solvent odour
Solubility in Water Immiscible
Vapour Pressure (20 °C) 34.50 kPa at 15 °C
Flash Point < -29 °C
Flammability Limits 2.15 (V/V) - 13 (V/V)
Pour Point > 0 °C
Boiling Point Range 50-112 °C
Open Time 3-5 minutes
Storage Conditions Must be stored in original, undamaged packaging, in dry conditions and out of direct sunlight, at temperatures between +10°C and +25°C.

Everbond Spray Contact SP-230 - Use Cases

Here are some common examples on where Everbond Spray Contact SP-230 used by our customers.

Joinery & Cabinets

Laminating large production panels

When bonding extensive timber, MDF, or particleboard panels quickly and uniformly in a high-volume production environment.

Spray application provides rapid, even coverage over large surfaces, ensuring consistent, high-strength bonds crucial for production efficiency.

  • 6-8 m²/L consumption
  • 3-5 minute dry time
  • 17% solid content
  • 0.81 kg/L density

Joinery & Cabinets

Bonding porous materials without bleed

Laminating open-weave fabrics, cloth-backed vinyl, or foams to substrates, where preventing adhesive bleed-through is critical.

Specifically formulated for spray application, it adheres to porous substrates without staining or compromising the material's aesthetic appearance.

  • For open weave materials
  • Bonds cloth backed vinyl
  • 3-5 minute flash-off
  • 17% solid content

Caravan & Truck

Vehicle interior covering material bonding

Securing covering materials and components in transport vehicle fit-outs, including high spring-back materials.

Achieve strong, lasting bonds for vehicle interiors with high heat and water resistance, ensuring durability against environmental factors.

  • High heat resistance
  • PUR foams
  • textiles
  • 3-5 minute dry time

Joinery & Cabinets

Laminate panel contact bonding

Installing plastic laminates or MDF panels requiring strong, fast-setting contact bonds for production efficiency.

Its fast drying time and high initial strength accelerate production, creating durable bonds for laminate and panel fabrication.

  • Plastic laminates
  • MDF
  • 3-5 minute dry time
  • high initial strength

Alternative Products

Vendor
Example product title
From $183.65
From $183.65
Vendor
Example product title
From $183.65
From $183.65
Vendor
Example product title
From $183.65
From $183.65
Vendor
Example product title
From $183.65
From $183.65
Vendor
Example product title
From $183.65
From $183.65
Vendor
Example product title
From $183.65
From $183.65

Need Help with Everbond Spray Contact SP-230?

Need more information about this product? Hit the button below and reach out to one of our experts now.

Get In Contact
Recently Viewed Products