11
At a Glance: Key Applications
Use Everbond Melamine PVA Adhesive for: Reliable bonding of melamine-faced board in cabinetmaking, kitchen joinery, and flat-pack furniture assembly where clarity, strength, and speed are essential.
Everbond Melamine PVA Adhesive: A Technical Overview
Everbond Melamine PVA Adhesive is a high-performance, water-based adhesive formulated for the precise demands of melamine-faced substrates. It delivers excellent adhesion thanks to its dual PVA/EVA polymer backbone and dries crystal-clear—ideal for exposed joins in cabinets and drawers. The fast open time (~3 minutes) and efficient clamp time (2–4 hours at 20°C) ensure strong initial bond strength, even in demanding shop conditions. The adhesive’s high solids content maximises wet grab, helping reduce slippage during clamping.
Core Features & Specifications
- Clear-drying formula – maintains aesthetic integrity of exposed joins
- PVA/EVA polymer system – excellent bond strength to melamine and laminate
- Fast open time (~3 min) – ideal for rapid assembly workflows
- Clamp time 2–4 hours – effective strength with moderate pressure
- Coverage of 150 g/m² – efficient for production-scale application
The Everbond Melamine PVA Adhesive Advantage
- Ideal for cabinet and drawer assembly where clean finishes are crucial
- Consistent cure profile delivers dependable bond performance in 24–48 hrs
- White liquid turns clear when dry – easy application and finish visibility
- Non-structural formulation reduces risk of wood fibre damage during sanding
- Suitable for use in most joinery workshops and factory conditions
Cure Profile & Performance
The adhesive offers an open time of approximately 3 minutes, which suits standard melamine pressing techniques. Clamp time ranges between 2–4 hours at 20°C and 65% RH, allowing workflow flexibility. Full cure is achieved within 24–48 hours, depending on substrate porosity and ambient humidity. Ideal timber moisture is 8–10% for maximum bonding.
Coverage Rate & Yield
Everbond Melamine PVA delivers approximately 150 g/m² of coverage. In typical cabinetry assembly, a 5L unit covers around 33 square metres, providing efficient yield per batch with minimal waste.
Application information cards
Required Tools & Equipment
- Squeeze bottle or glue brush
- Clamps or press (sufficient to maintain substrate pressure)
- Moisture meter (recommended)
Pro Tips for Best Results
- Ensure substrates are tightly fitted to prevent bond gaps
- Avoid over-application which can extend drying time and affect adhesion
- Use clamps with uniform pressure and avoid movement during cure
Avoiding Common Issues
- Do not apply below 10°C – low temps affect bond quality
- Keep away from moisture during curing phase
- Avoid excessive adhesive squeeze-out which can damage finishes
Storage & Shelf Life Considerations
Store in a cool, dry, and well-ventilated area between 5°C and 40°C. Avoid direct sunlight. Shelf life is 12 months in original, unopened packaging stored at 25°C.
Frequently Asked Questions About Everbond Melamine PVA Adhesive
Q: Can I use this adhesive on raw MDF or particleboard?
A: Yes, Everbond Melamine PVA adheres well to MDF and particleboard, especially when bonding to melamine-faced sheets. Ensure surfaces are clean, dust-free, and fit tightly to ensure optimum bonding and clamp effectiveness.
Q: What’s the ideal clamping time for a strong bond?
A: Under standard Australian workshop conditions (20°C, 65% RH), a clamp time of 2–4 hours is sufficient. Full strength is achieved in 24–48 hours. For cooler or more humid environments, allow extra time.
Q: Does the glue dry transparent?
A: Yes, it applies white and dries clear—making it ideal for cabinetry with visible joins. This helps maintain a clean finish and improves visual quality in exposed panel work.
Q: Is this suitable for structural bonding?
A: No. Everbond Melamine PVA is a non-structural adhesive designed for interior furniture and cabinetry. For structural applications, consult Adheseal’s structural adhesives range.
Q: How do I clean tools after application?
A: Tools should be cleaned with warm soapy water before the adhesive dries. Once cured, the adhesive must be mechanically removed. Prompt cleanup ensures tool longevity and clean application lines.
Applications & Benefits
| Application / Use Case | Key Benefit | Primary Trades |
|---|---|---|
| Bonding Melamine Boards | Strong bond to non-porous melamine with clear finish | Cabinetmakers, Joiners |
| Flat Pack Furniture Assembly | Fast clamping time accelerates production | Furniture Manufacturers |
| Drawer Box Construction | Clear-drying and low gap tolerance adhesive | Kitchen Installers |
| Melamine Laminate Repairs | Easy to apply and clean up with minimal tooling | Shopfitters, DIY Trades |
Applying Everbond Melamine PVA Adhesive: Protocols & Best Practices
General Application Steps:- Preparation: Ensure the substrate is clean, dry, and prepared as per the Adhesion & Preparation Guide. Surfaces should fit closely. Mask adjacent surfaces if required.
- Application: Apply adhesive evenly using a squeeze bottle or brush. Join surfaces within the 3-minute open time window. Clamp firmly.
- Tooling & Finishing: Remove excess glue before it cures. Maintain clamping pressure for 2–4 hours.
- Curing: Allow the assembly to cure undisturbed for 24–48 hours before final machining or load.
For Cabinetmakers: Flat-Pack Assembly
The Engineering Challenge: Melamine edges often resist bonding due to non-porous surfaces.
The System-Based Solution with Everbond: The PVA/EVA chemistry is optimised for melamine surfaces, delivering reliable wet-out and mechanical lock during pressing.
Best Practice Note: Use light sanding for laminated substrates if unsure of compatibility and maintain consistent clamping pressure throughout the panel.
For Joiners: Kitchen Drawer Box Assembly
The Engineering Challenge: Fast-paced assembly lines require short press times without bond failure.
The System-Based Solution with Everbond: The quick clamp and clear dry finish supports tight production cycles while delivering reliable strength on vertical joints.
Best Practice Note: Apply only as much adhesive as needed—over-application can lead to excess squeeze-out and visual imperfections on finished cabinetry.
Limitations & Safety
Product limitations and safety information
Limitations:
- Not suitable for structural bonding – use appropriate adhesives for load-bearing applications
- Do not apply in temperatures below 10°C
- Ambient conditions can significantly affect cure rate – ensure workshop conditions meet recommended parameters
Safety & Handling:
- PPE: Impervious gloves and eye protection recommended.
- Ventilation: Use in well-ventilated area.
- Handling: Avoid contact with skin and eyes. Wash immediately with water if contact occurs.
- First Aid: In case of skin contact, wash with warm soapy water. Seek medical advice if irritation persists.
Everbond Melamine PVA Adhesive Adhesion & Preparation Guide
-
Substrate preparation guidelines
- Melamine Faced Board: Clean, dust-free, tightly fitting surfaces recommended – Primer: No primer required.
- MDF / Particleboard: Ensure uniform surface fit; remove dust and contaminants – Primer: No primer required.
- Laminated Panels: Clean with dry cloth, ensure compatibility – Primer: No primer required.
- Choosing a selection results in a full page refresh.