-
Injection SyringeVendor:Adheseal ToolsUse this low-pressure injection syringe for precise, controlled epoxy delivery into small concrete cracks. It applies up to 3.0 kgf/cm² to ensure thorough filling without damaging the substrate.
- From $6.00
- From $6.00
- Unit price
- per
-
Jumbo Cartridge Gun 850mlVendor:Adheseal ToolsJumbo Cartridge Gun 850ml is a professional-grade dispensing tool engineered for high-volume structural waterproofing and heavy infrastructure maintenance. This industrial steel frame tool utilizes a low gearing ratio to provide maximum mechanical advantage, ensuring consistent bead pressure and flow rates even when extruding high-viscosity...
- $80.43
$0.00- $80.43
- Unit price
- per
-
KwikMask120 Green Masking TapeVendor:KwikmaskThis premium quality high temp masking tape creates sharp, neat & clean lines with a lower paint ridge than normal crepe masking tapes.
- From $4.80
- From $4.80
- Unit price
- per
-
Kwikseal 550 PVC Duct TapeVendor:KwikmaskUse Kwikseal 550 for reliable temporary sealing and joining on site, offering over 100% elongation and a high-tack hotmelt adhesive for PE film and insulation.
- From $3.61
- From $3.61
- Unit price
- per
-
Large Disposable Caulking Sticks (50 Pack)Vendor:Adheseal ToolsUse Large Disposable Caulking Sticks to achieve a clean, consistent sealant bead every time. The 50-pack ensures efficient workflow and a professional finish across all joint types.
- $6.70
- $6.70
- Unit price
- per
-
Lauxes Grates End CapsVendor:
End Caps for Lauxes Grates in Silk Silver, Midnight Black, and Matte Gold. Rustproof aluminium with lifetime warranty. Fits all standard grate models. Sold in pairs.- From $8.50
- From $8.50
- Unit price
- per
-
Lauxes Grates Midnight Storm Water NeXT Generation 128Vendor:
Use Lauxes Grates Midnight Storm Water NeXT Generation 128 for heavy-duty outdoor drainage requiring high load capacity and a durable finish. Its 10.2 tonne load rating, UV-stabilised aluminium, and rustproof guarantee prevent callbacks for structural failure or discolouration.
- From $180.74
- From $180.74
- Unit price
- per
-
Lauxes Grates NeXT Generation NXT14 Linear Drain KitVendor:
Use Lauxes Grates NeXT Generation NXT14 for reliable, rustproof linear drainage in wet areas. Its anodised aluminium construction carries a Lifetime Rustproof and 25-Year UV Warranty, offering durability and anti-tracking performance with onsite cutting flexibility.
- From $26.40
- From $26.40
- Unit price
- per
-
Lauxes Grates NeXT Generation NXT35 Linear Drain KitVendor:
Use Lauxes Grates NeXT Generation NXT35 for heavy-duty linear drainage in outdoor areas. With a 10.3 tonne load rating and a lifetime rustproof warranty on its anodised aluminium, it handles vehicle traffic and coastal conditions while preventing water tracking.
- From $14.99
- From $14.99
- Unit price
- per
-
Lauxes Grates Pop Waste OutletsVendor:
Use Lauxes Grates Pop Waste Outlets for connecting linear grates to waste lines. The anodised aluminium construction ensures a lifetime rustproof performance in wet areas, compatible with 40mm, 50mm, 72mm, and 80mm PVC pipework.
- $11.67
- $11.67
- Unit price
- per
-
Lauxes Grates Slimline Tile Insert 26 Grate KitVendor:
Lauxes Grates Slimline Tile Insert 26 Grate Kit with 5600mm max length, rustproof and UV-stable. Supports 11mm tiles, cut-to-fit, and easy waste outlet placement.
- From $14.99
- From $14.99
- Unit price
- per
-
Lauxes Grates TCT Hole Saws For Pop Waste OutletVendor:
Use Lauxes Grates TCT Hole Saws for precise, burr-free holes in aluminium Lauxes grates. TCT teeth provide up to 10x longer life than standard bi-metal saws and come as a complete unit with a pilot drill for immediate use on site.
- From $36.67
- From $36.67
- Unit price
- per
-
Lauxes Grates Tile Insert Plus 35 Grate KitVendor:
Use Lauxes Grates Tile Insert Plus Grate Kit for concealed drainage in tiled areas. Its anodised aluminium construction handles 10.3-tonne loads, resists rust with a lifetime warranty, and is cuttable onsite for custom fit with tiles up to 18mm thick.
- From $14.99
- From $14.99
- Unit price
- per
-
Lauxes Grates Waste Corner Joiner 90° PairVendor:
Create 90° corner transitions in Lauxes grates with rustproof anodised aluminium joiners. Available in Silk silver, midnight black, matte and gold.
- $16.00
- $16.00
- Unit price
- per
-
Lauxes Grates Waste Joiner 180° PairVendor:
The Lauxes Waste Joiner 180° Pair is an essential accessory for expanding your Lauxes grate drainage system around corners.
- $16.00
- $16.00
- Unit price
- per
-
Lauxes NeXT Generation 21 Linear Drainage Grate 21mm x 100mm – SilverVendor:
The Lauxes NeXT Generation 21 (NXT21) combines a sleek architectural design with superior outdoor drainage performance. Featuring a premium Silver anodised finish, it's engineered for balconies, terraces and external living spaces with easy maintenance and long-term durability.
- From $404.97
- From $404.97
- Unit price
- per
-
Lauxes Standard Floor Grate 70mm x 23mm – Brushed NickelVendor:
The original Lauxes Standard Floor Grate in an elegant Brushed Nickel anodised finish. 100% UV stabilised, trafficable up to 10.2 tonnes and backed by a Lifetime Rustproof Warranty. Available in multiple lengths with custom pre-cut options.
- From $13.56
- From $13.56
- Unit price
- per
-
Lauxes Standard Floor Grate 70mm x 23mm – GoldVendor:
The original Lauxes Standard Floor Grate in a luxurious Gold anodised finish. 100% UV stabilised, trafficable up to 10.2 tonnes and backed by a Lifetime Rustproof Warranty. Available in multiple lengths with custom pre-cut options
- From $13.56
- From $13.56
- Unit price
- per
-
Lauxes Standard Floor Grate 70mm x 23mm – Midnight BlackVendor:
The original Lauxes Standard Floor Grate in a striking Midnight Black anodised finish. 100% UV stabilised, trafficable up to 10.2 tonnes and backed by a Lifetime Rustproof Warranty. Available in multiple lengths with custom pre-cut options.
- From $13.56
- From $13.56
- Unit price
- per
-
Lauxes Standard Floor Grate 70mm x 23mm – SilverVendor:
The original Lauxes Standard Floor Grate in a modern Silver anodised finish. UV stabilised, trafficable up to 10.2 tonnes and backed by a Lifetime Rustproof Warranty. Available in multiple lengths with custom pre-cut options.
- From $13.56
- From $13.56
- Unit price
- per
-
Leister Triac AT Heat GunVendor:LeisterUse the Leister Triac AT for precision hot air welding and forming of thermoplastics. Its digital closed-loop temperature control and stepless airflow ensure consistent seam quality for critical roofing, flooring, and geomembrane applications.
- $2,390.00
- $2,390.00
- Unit price
- per
-
Leister Triac ST Heat GunVendor:LeisterUse the Leister Triac ST for professional thermoplastic welding. Its 1600W analog control delivers consistent heat up to 700°C, ensuring reliable seams on challenging outdoor jobs without digital component failures.
- $1,794.70
- $1,794.70
- Unit price
- per
-
Leister UNIDRIVE 500 Semi-Automatic Welding MachineVendor:LeisterUse the Leister UNIDRIVE 500 for consistent, high-speed welding of thermoplastic membranes on roofs and for critical detailing. Its digital control and 4.5 m/min speed prevent seam failure and increase productivity over manual methods.
- $10,179.60
- $10,179.60
- Unit price
- per
-
Mapegrout Fast-Set RapidoVendor:
Use Mapegrout Fast-Set Rapido for rapid structural concrete repairs. It achieves over 10 MPa compressive strength in 3 hours, holds 20-25 mm vertically without slump, and is classified R3 for efficient site turnaround.- $82.39
- $82.39
- Unit price
- per
-
Mapei Eco Prim T Plus PrimerVendor:
Solvent-free acrylic primer with excellent adhesion, flexibility, and water resistance. Suitable for concrete, ceramic, wood, and other internal flooring substrates.
- From $103.16
- From $103.16
- Unit price
- per
-
Mapei Keracolor FF Bioblock GroutVendor:
Use Mapei Keracolor FF Bioblock for grouting tile joints up to 6mm, especially in wet or high-traffic areas. Its CG2WA classification confirms high abrasion resistance and low water absorption, preventing mould and ensuring a durable finish.
- From $15.33
$19.17- From $15.33
- Unit price
- per
-
Mapei Keracolor GG Cementitious GroutVendor:
Use Keracolour GG for grouting tile joints from 4 to 15 mm, internally and externally. Its CG2WA classification confirms high abrasion resistance and reduced water absorption, ensuring durability against freeze/thaw cycles and heavy traffic.
- From $27.98
- From $27.98
- Unit price
- per
-
Mapei Keraflex Maxi S1 Cementitious AdhesiveVendor:
Use Keraflex Maxi S1 for large format tiles and natural stone on walls and floors. Its C2TE S1 rating ensures no vertical slip and excellent deformability, making it reliable for challenging installations that need extended open time.
- From $43.33
- From $43.33
- Unit price
- per
-
Mapei Kerapoxy AdhesiveVendor:
Use Kerapoxy Adhesive for demanding tile and stone installations where strength and chemical resistance are critical. Its R2T classification provides no vertical slip and excellent long-term bond, preventing failures in pools and external areas.
- $181.98
- $181.98
- Unit price
- per
-
Mapei Kerapoxy Easy Design Grout and AdhesiveVendor:
Use Mapei Kerapoxy Easy Design for grouting 1-15mm joints and adhering tiles in demanding environments. This acid-resistant, bacteriostatic epoxy is certified for hygiene, delivers high mechanical strength, and offers decorative flexibility with add-ins.
- From $95.50
- From $95.50
- Unit price
- per
-
Mapei Lamposilex (Waterplug)Vendor:
Use Mapei Lamposilex to instantly stop active water leaks in concrete and masonry. It sets in 90 seconds, withstands pressurised water, and is AS/NZS 4020:2018 certified for potable water contact.
- From $49.53
- From $49.53
- Unit price
- per
-
Mapei Mapeband Easy Joint TapeVendor:
Use Mapeband Easy for bridging movement joints and changes of plane in waterproofing systems. Its rubber core offers 315% elongation, preventing membrane rupture at critical wall-floor junctions and expansion joints.
- $118.48
- $118.48
- Unit price
- per
-
Mapei MapecempVendor:
Use Mapei Mapecemp for rapid-drying floor screeds ready for tiles in 3-4 hours and moisture-sensitive flooring in 24 hours with less than 2% residual moisture, preventing project delays and callbacks.
- $69.18
- $69.18
- Unit price
- per
-
Mapei Mapecemp Pronto ScreedVendor:
Use Mapecem Pronto for rapid-set screeds where project timelines and moisture control are critical. It allows flooring installation in 24 hours with less than 2% residual moisture, ensuring predictable project scheduling.
- $34.30
- $34.30
- Unit price
- per
-
Mapei Mapegrout T40 MortarVendor:
Use Mapegrout T40 for R3 structural concrete repairs requiring medium mechanical performance. This 40 MPa, shrinkage-compensated, fibre-reinforced mortar applies without slump on vertical surfaces, ensuring durable and compliant repairs.
- $86.31
- $86.31
- Unit price
- per
-
Mapei Mapeproof Swell SealantVendor:
Use Mapei Mapeproof Swell Sealant for watertight sealing of confined joints, cracks, and penetrations in concrete. This hydro-expansive paste swells by ≥100% on water contact, resisting up to 1 atm of hydrostatic pressure for reliable protection against leaks.
- $332.94
- $332.94
- Unit price
- per
-
Mapei Planicrete SPVendor:
White SBR latex admixture for cement screeds, renders and bonding slurries; EN 1542 adhesion exceeds 2.0 MPa after 28 days in the reference mortar.
- $144.73
- $144.73
- Unit price
- per
-
Mapei Primer GVendor:
Use Mapei Primer G for critical substrate preparation, ensuring stable adhesion and preventing common failures like ettringite formation between gypsum and cement-based materials. It offers EC1 Plus low VOC emissions and fast drying.
- From $57.91
- From $57.91
- Unit price
- per
-
Mapei Topcem Pronto SlurryVendor:
Use Mapei Topcem Pronto Slurry for bonding screeds to concrete substrates. It ensures a full wet-on-wet bond, preventing delamination and callbacks for interior and exterior jobs.
- $27.44
- $27.44
- Unit price
- per
-
Mapei UC LevellerVendor:
Use Mapei UC Leveller for rapid deep-fill levelling of interior floors up to 70mm. It achieves C25-F7 strength, allowing flooring installation in 24 hours and keeping projects on schedule.
- $46.76
- $46.76
- Unit price
- per
-
Mapei UltraCare Kerapoxy CleanerVendor:
Use Mapei UltraCare Kerapoxy Cleaner for removing fresh and cured epoxy grout haze and residues from porcelain, glazed ceramic, and glass mosaics. Its ready-to-use, concentrated formula ensures efficient cleanup without damaging compatible surfaces.
- From $39.04
- From $39.04
- Unit price
- per
-
Mapei UltraCare Smooth SiliconeVendor:
MAPEI UltraCare Smooth Silicone is a ready-to-use, water-based smoothing solution for clean, compact sealant finishes. Compatible with acetic, neutral, polyurethane and other sealants across common building surfaces, without leaving residues.
- From $15.38
- From $15.38
- Unit price
- per
-
MapePUR Universal Foam M/GVendor:
Use MapePUR Universal Foam M/G for critical thermal and acoustic gap filling around windows, doors, and pipes. It offers 58 dB soundproofing and cures quickly, allowing cutting within 25-30 minutes.
- From $16.33
- From $16.33
- Unit price
- per
-
Mapesil AC Silicone SealantVendor:
Use Mapesil AC for elastic, mould-resistant sealing of expansion joints in wet areas and general construction, offering ±25% movement and 40 colour options for a professional, durable finish.
- From $172.56
- From $172.56
- Unit price
- per
Products
Sidebar
Frequently Asked Questions
Translation missing: en.t:sections.general.no_content
Recently Viewed Products