Lauxes Grates NXT 35 – Silver is a 100mm wide, 35mm deep anodised aluminium linear drain for indoor and outdoor applications. The NXT profile combines anti-water-tracking geometry with an easy roll-out top for cleaning and a waste outlet that can be positioned to suit the plumbing layout.
Lauxes manufactures NXT 35 in 3000mm and 5600mm full lengths. Adheseal currently offers Silver as a 1000mm sell unit and a 5600mm full length, with 40mm, 50mm, 72mm and 80mm waste outlet options.
Key features
- 100mm wide x 35mm deep NXT profile
- Anodised aluminium construction
- Anti-water-tracking design with easy roll-out cleaning access
- 40mm, 50mm, 72mm and 80mm waste outlet options
- Can be cut on site to suit the installation
- Trafficable up to 10.2 tonnes
- Lifetime rustproof warranty and 25-year UV stability warranty
- Suitable for indoor and outdoor applications
Frequently asked questions
Can I cut the NeXT Generation 35 grate to shorter lengths?
Yes, the NeXT Generation 35 grate is designed for custom fitting. It can be cut on-site using a mitre saw with a suitable blade.
Is this drain suitable for driveways with vehicle traffic?
Yes, the grate has a 10.3 tonne load rating. This supports regular vehicular traffic, including cars and light trucks, without structural failure.
Will the anodised aluminium rust in coastal environments?
No, this drain is made from anodised aluminium and includes a lifetime rustproof warranty. It is designed to resist corrosion in coastal or salt-exposed areas.
How do I clean the drain?
Cleaning is straightforward. The grate simply lifts out without tools, allowing access to flush or vacuum debris from the tray below.
Can this linear drain be used for indoor applications?
No, the NeXT Generation NXT35 is not designed for low-profile indoor use. Its 35mm depth is intended for outdoor drainage scenarios.
Applications and benefits
| Application | Key benefit | Primary trades |
|---|---|---|
| Pool surrounds | Fast drainage combined with lifetime corrosion resistance from anodised aluminium. | Landscapers, Pool builders |
| Driveways | Withstands vehicle loads up to 10.3 tonnes, preventing structural failure and ensuring long-term integrity. | Civil contractors, Builders |
| Patios and decks | Eliminates water pooling and surface tracking, keeping outdoor entertainment areas dry and clean. | Landscapers, Builders |
| Commercial entryways | Provides effective drainage with a clean finish and allows for simple, tool-free debris removal. | Builders, Maintenance contractors |
Installing Lauxes NXT 35 – Silver
- Complete waterproofing, tiling and grouting before installing the grate. The grate does not form part of the waterproofing system.
- Use a template or spacer during screeding or concreting. Do not allow the grate to contact wet cement or screed.
- Measure the finished length, cut the bottom tray to suit the selected end-cap type, then cut the roll-out top grate to the required clearance.
- Drill the waste opening at the required position using a suitable Lauxes hole saw and secure the waste outlet with neutral-cure silicone.
- Install the grate last using neutral-cure silicone, ensure it is level, remove excess building material immediately and finish the perimeter with neutral-cure silicone.
Product limitations
- Not for: Low-profile indoor applications due to its 35mm depth. This product is designed for external use.
- Not for: Decorative finishes where visual discretion or ultra-slim profiles are the primary requirement.
Safety and handling
Personal protective equipment
When cutting aluminium on-site, use protective gloves and eye protection.
Ventilation
Ventilation is not specifically required for mechanical installation of the grate system.
First aid
- Contact: In case of sharp edge contact, apply standard wound care. The anodised aluminium is non-toxic.
Storage and disposal
Avoid scratching the anodised surface during transport and handling. Dispose of aluminium off-cuts according to local waste regulations.
Substrate guide
Proper substrate preparation and installation are critical for the long-term performance of any linear drainage system.
Concrete
Surface prep: Secure with appropriate bedding material and ensure correct drainage outlet connection.
Primer: Not specified.
Asphalt
Surface prep: Embed the drain securely, using edge protection to maintain stability under heavy loads.
Primer: Not specified.
Pavers
Surface prep: Position accurately between modular stones and ensure secure anchoring to prevent movement.
Primer: Not specified.
Tiles
Surface prep: Install with tile adhesive or a screed base to achieve a clean, level finish.
Primer: Not specified.
Lauxes Grates NXT 35 Linear Drain Kit – Silver Physical Properties
| Property | Value |
|---|---|
| Product Name | Lauxes Grates NXT 35 – Silver |
| Manufacturer Full Lengths | 3000mm, 5600mm |
| Adheseal Sell Lengths | 1000mm, 5600mm |
| Profile Width | 100mm |
| Profile Depth | 35mm |
| Material | Anodised Aluminium |
| Colour | Silver |
| Applications | Indoor, Outdoor |
| Outlet Sizes | 40mm, 50mm, 72mm, 80mm |
| Trafficability | Up to 10.2 tonnes |
| Anti-Water Tracking | Yes |
| Cutting Capability | Can be cut on site to suit the installation |
| Waste Outlet Positioning | Waste outlet can be positioned to suit the plumbing layout |
| Cleaning Access | Easy roll-out grate |
| Warranty | Lifetime rustproof warranty; 25-year UV stability warranty |