-
Glaziers SpatulaVendor:Adheseal ToolsQuality silicone scraper for applicators for typical trade applications. Commonly used for removing excess silicone and sealants in glazier applications.
- From $9.95
- From $9.95
- Unit price
- per
-
Silicone Scraper - RedVendor:Adheseal ToolsUse the Red Silicone Scraper for professional wet sealant finishing and excess removal. Its precision-moulded edges prevent surface damage and ensure a clean, consistent joint profile in high-volume work.
- From $9.95
- From $9.95
- Unit price
- per
-
Spray Bottle HeadVendor:Adheseal ToolsSpray bottle heads for typical spray bottles. Spray Bottle not included.
- $3.00
- $3.00
- Unit price
- per
-
Rokset Ace Polyester Roller Cover 230mm x 12mmVendor:
Rokset Ace Polyester Roller Cover 230 mm × 12 mm Nap (6 Pack) offers an economical solution for industrial and general painting. Knitted polyester fabric ensures high paint Pick-Up and Release across semi-smooth to rough surfaces – ideal for water-based coatings and budget-conscious projects.- From $19.34
- From $19.34
- Unit price
- per
-
-
Gripset B26 Asphalt Crack FillerVendor:
Use GRIPSET B26 for cold-applied asphalt and bitumen crack sealing. Its fast-drying, flexible formulation allows traffic in 15 minutes, avoiding the need for heating equipment and resisting sulphates.- $187.64
- $187.64
- Unit price
- per
-
Lauxes Grates NeXT Generation NXT14 Linear Drain KitVendor:
Use Lauxes Grates NeXT Generation NXT14 for reliable, rustproof linear drainage in wet areas. Its anodised aluminium construction carries a Lifetime Rustproof and 25-Year UV Warranty, offering durability and anti-tracking performance with onsite cutting flexibility.- From $26.40
- From $26.40
- Unit price
- per
-
Ardex RA 88 Plus Multi-Purpose Epoxy Repair AdhesiveVendor:
Use ARDEX RA 88 PLUS for high-performance epoxy bonding and non-moving repairs on concrete and other materials, offering 87 MPa compressive strength and AS/NZS4020 potable water compliance in a non-sag, trowelable format.- $143.73
- $143.73
- Unit price
- per
-
Ardex RA 142 Structural Crack Injection EpoxyVendor:
Use ARDEX RA 142 for structural concrete crack injection and bonding, specifically targeting hairline to 3mm cracks. Its 190 cps low viscosity ensures deep penetration, delivering 70 MPa compressive strength to restore integrity.
- $143.22
- $143.22
- Unit price
- per
-
RLA Penatech HS GroutVendor:RLAUse RLA Penatech HS Grout for critical structural grouting from 10mm to 150mm, ensuring non-shrink performance with dual expansion and compressive strengths up to >85 MPa. It meets ASTM C1107-91 and handles dynamic loads, providing a reliable, stain-free solution.
- $53.15
- $53.15
- Unit price
- per
-
RLA Foam FillerVendor:RLAUse RLA Foam Filler for high-yield filling and sealing of irregular gaps and cavities. It expands up to 45 times to form a stable, airtight seal, reducing callbacks from drafts and noise without distorting frames.
- From $20.00
- From $20.00
- Unit price
- per
-
Injection HoseVendor:Adheseal Tools250 mm replacement injection hose for the Adheseal Injection Gun (SKU INJGUN/RES). Designed to connect the gun to standard injection balloons for crack injection repairs — quick swap spare part for professional contractors.
- $20.00
- $20.00
- Unit price
- per
-
Ardex X 68 Tile AdhesiveVendor:
Use ARDEX X68 for demanding internal and external tiling jobs, including swimming pools and large format tiles. Its C2 TE S1 classification ensures high adhesion, non-slump properties, and flexibility, plus an extended 30-minute open time for efficient placement.
- $41.87
$34.35- $41.87
- Unit price
- per
-
Ardex Multiprime PrimerVendor:
Use ARDEX Multiprime for priming porous concrete, render, and AAC to improve adhesion for ARDEX systems. It dries in 15-30 minutes and offers reliable bond strength for demanding applications, avoiding issues caused by untreated substrates.
- $301.48
- $301.48
- Unit price
- per
-
Ardex X 17 Tile AdhesiveVendor:
Use ARDEX X 17 White for flexible, non-slump tiling of large format and heavy tiles on walls and floors. Its C2 TE S1 classification ensures high bond strength and flexibility, preventing callbacks from movement or delamination in both internal and external residential applications.
- From $33.58
$25.59- From $33.58
- Unit price
- per
-
Ardex X 18 Tile AdhesiveVendor:
Use ARDEX X 18 for demanding wall and floor tiling, including swimming pools and external areas. Its C2 TE S1 classification ensures improved bond, non-slump, extended open time, and flexibility, backed by Green Star compliance.
- From $48.35
- From $48.35
- Unit price
- per
-
Ardex FS-DD Tile Grout 5kgVendor:
Use ARDEX FS-DD for grouting fine tile joints up to 4mm, particularly in wet areas and on timber floors. It is water repellent, dirt resistant, and contains ARDEX Grout Shield to combat mould, offering 20 MPa compressive strength and walk-on time in 5 hours.
- $32.13
- $32.13
- Unit price
- per
-
Ardex FG8 Tile GroutVendor:
Use Ardex FG8 for flexible, mould-resistant grouting of tile joints from 1mm to 8mm wide on walls and floors. Its polymer-fortified, CG2W classified formulation provides over 4 MPa flexural strength at 28 days, reducing cracking and offering a smooth, easy-to-clean finish.
- From $28.09
- From $28.09
- Unit price
- per
-
Mapei Lamposilex (Waterplug)Vendor:
Use Mapei Lamposilex to instantly stop active water leaks in concrete and masonry. It sets in 90 seconds, withstands pressurised water, and is AS/NZS 4020:2018 certified for potable water contact.- From $49.53
- From $49.53
- Unit price
- per
-
Mapei UltraCare Kerapoxy CleanerVendor:
Use Mapei UltraCare Kerapoxy Cleaner for removing fresh and cured epoxy grout haze and residues from porcelain, glazed ceramic, and glass mosaics. Its ready-to-use, concentrated formula ensures efficient cleanup without damaging compatible surfaces.
- From $39.04
- From $39.04
- Unit price
- per
-
Mapei Mapeproof Swell SealantVendor:
Use Mapei Mapeproof Swell Sealant for watertight sealing of confined joints, cracks, and penetrations in concrete. This hydro-expansive paste swells by ≥100% on water contact, resisting up to 1 atm of hydrostatic pressure for reliable protection against leaks.
- $332.94
- $332.94
- Unit price
- per
-
Panther Stainless Steel TrowelVendor:PantherThe Panther Stainless Steel Square Notch Trowel features a 280mm x 120mm stainless steel blade with soft grip handle. Spot rivet weld construction ensures durability, while multiple notch sizes (4mm–15mm) provide precision for tiling and plastering.
- $11.58
$0.00- $11.58
- Unit price
- per
-
BAT PRO Square Trowel With Swan NeckVendor:B.A.TPro-grade gauging trowel for mixing and dispensing adhesive or grout from a bucket. The swan-neck profile lets you rest the tool on the rim without it dropping back into the mix. Available in 180mm and 200mm carbon steel.
- From $12.50
- From $12.50
- Unit price
- per
-
BAT Pro Gauging Trowel with Swan NeckVendor:B.A.TPro-grade gauging trowel for mixing and dispensing adhesive or grout from a bucket. The swan-neck profile lets you rest the tool on the rim without it dropping back into the mix. Available in 180mm and 200mm carbon steel.
- From $12.50
- From $12.50
- Unit price
- per
-
BAT Heavy Duty Paint Roller FrameVendor:B.A.TA robust and reliable tool for painting projects, the 230mm Standard Roller Frame is designed for durability and ease of use.
- From $8.20
- From $8.20
- Unit price
- per
-
BAT Professional Stainless Steel TrowelVendor:B.A.TThe BAT Professional Stainless Steel Square Notched Trowel is engineered for tilers and construction professionals requiring consistent adhesive coverage. Featuring a hardened and tempered stainless steel blade with an ergonomic soft grip handle, this tool provides accuracy, durability, and comfort for intensive daily use.
- $29.17
$0.00- $29.17
- Unit price
- per
-
Buzon U-WASHER Anti-Lifting KitVendor:
Use Buzon U-WASHER to mechanically secure raised pavers against wind uplift. Made from corrosion-resistant Stainless Steel 316 (V4A), it ensures long-term stability for Buzon PB, DPH, and BC pedestal systems.- From $2.62
- From $2.62
- Unit price
- per
-
Mapei Keraflex Maxi S1 Cementitious AdhesiveVendor:
Use Keraflex Maxi S1 for large format tiles and natural stone on walls and floors. Its C2TE S1 rating ensures no vertical slip and excellent deformability, making it reliable for challenging installations that need extended open time.
- From $43.33
- From $43.33
- Unit price
- per
-
Waterstop Streamline 135° Corner (2/3 Leg)Vendor:Waterstop StreamlineUse Waterstop Streamline 135° Corner for neo-angle shower waterproofing. This AS 3740:2021 compliant, factory-fixed aluminium profile ensures precision and eliminates site mitring.
- From $196.77
- From $196.77
- Unit price
- per
-
Waterstop Streamline 90° Corner (2 Leg)Vendor:Waterstop StreamlineUse Waterstop Streamline 90° Corner (2 Leg) for compliant, hob-less L-shaped showers. This preformed 6463–T5 aluminium profile ensures AS 3740:2021 waterproofing, simplifies screeding, and provides a secure base for frameless glass.
- From $191.75
- From $191.75
- Unit price
- per
-
RLA Flex Pro MS SealantVendor:RLARLA Flex Pro is a premium, one-component polyurethane joint sealant formulated for professional construction and waterproofing applications. It cures with atmospheric moisture to create a flexible, durable, and elastic seal that withstands structural movement and environmental exposure. Suitable for use on concrete, masonry, metals, and many common substrates without primer in most cases, Flex Pro offers high UV resistance, excellent adhesion, and long-term performance in both interior and exterior environments.
- From $10.90
- From $10.90
- Unit price
- per
-
Balcony Drip Angle 90° Internal CornerVendor:
Why Choose Balcony Drip Angle 90° Internal Corner Use Balcony Drip Angle 90° Internal Corner for critical junctions where a factory-precise 90° internal corner is required to stop water tracking and provide a rigid substrate for membrane termination. This anodised aluminium component delivers a...- $23.63
- $23.63
- Unit price
- per
-
Mapegrout Fast-Set RapidoVendor:
Use Mapegrout Fast-Set Rapido for rapid structural concrete repairs. It achieves over 10 MPa compressive strength in 3 hours, holds 20-25 mm vertically without slump, and is classified R3 for efficient site turnaround.
- $82.39
- $82.39
- Unit price
- per
-
Planitop Fine Finish MortarVendor:
Use Planitop Fine Finish for feather-edge skim coating and levelling concrete surfaces up to 3mm. It delivers a breathable, uniform finish that is paintable in 7 days, avoiding surface imperfections under coatings.
- $107.31
- $107.31
- Unit price
- per
-
RLA Trulevel Econoscreed RapidVendor:RLAUse RLA TruLevel EconoScreed Rapid for rapid subfloor preparation where floor coverings need to go down fast. It achieves 65 MPa compressive strength and allows ceramic tiles in 4-6 hours, making it ideal for high-traffic and wet areas.
- $41.48
- $41.48
- Unit price
- per
-
Gripset Xpress Multi Pro MembraneVendor:
Use Gripset Xpress Multi Pro for waterproofing roofs, balconies, and wet areas where fast project turnaround is critical. It's rain-resistant in 3 hours, withstands ponding water, and remains highly flexible for lasting protection.
- $389.93
- $389.93
- Unit price
- per
-
Window PackersVendor:
Use Window Packers for precise levelling and alignment of window frames, cladding, and joinery. These rigid, non-compressible packers prevent settlement, offering dimensional stability and fast, error-free installation with their colour-coded thicknesses.
- From $48.97
- From $48.97
- Unit price
- per
-
Mapei Kerapoxy Easy Design Grout and AdhesiveVendor:
Use Mapei Kerapoxy Easy Design for grouting 1-15mm joints and adhering tiles in demanding environments. This acid-resistant, bacteriostatic epoxy is certified for hygiene, delivers high mechanical strength, and offers decorative flexibility with add-ins.
- From $95.50
- From $95.50
- Unit price
- per
-
Biyseal Acrylic Impregnated FoamVendor:
Use Biyseal Acrylic Impregnated Foam for immediate, weather-tight sealing of dynamic joints; it offers over 90% elastic recovery and blocks heavy rain at 75% compression.
- $136.58
- $136.58
- Unit price
- per
-
-
Lauxes Grates End CapsVendor:
End Caps for Lauxes Grates in Silk Silver, Midnight Black, and Matte Gold. Rustproof aluminium with lifetime warranty. Fits all standard grate models. Sold in pairs.
- From $8.50
- From $8.50
- Unit price
- per
-
BAT Eco SynSafe AcidVendor:B.A.TUse BAT Eco SynSafe Acid for safe descaling, etching concrete, and cleaning masonry. Its non-fuming, biodegradable organic compound provides industrial-strength dissolving power without the burn risk of traditional acids.
- From $34.42
- From $34.42
- Unit price
- per
-
Adheseal Showerseal SealerVendor:
Use Adheseal Showerseal for economic, long-term leak prevention in tiled wet areas and external porous surfaces. It penetrates to create a hydrophobic barrier, stops water ingress without changing appearance, and allows the substrate to breathe.
- $65.00
- $65.00
- Unit price
- per
-
Mapei Mapeband Easy Joint TapeVendor:
Use Mapeband Easy for bridging movement joints and changes of plane in waterproofing systems. Its rubber core offers 315% elongation, preventing membrane rupture at critical wall-floor junctions and expansion joints.
- $108.17
- $108.17
- Unit price
- per
-
Silcor Primer BSVendor:
Use SILCOR Primer BS for reliable adhesion of SILCOR polyurethane membranes to most rigid construction substrates. Its fast-drying (30-60 min) modified polyurethane resin ensures a strong bond and water resistance, critical for weather-interrupted jobs.- $282.35
- $282.35
- Unit price
- per
-
Cement Australia Sand & Cement (Screed)Vendor:Cement AustraliaCement Australia Sand & Cement (Screed) is a pre-blended, ready-to-use mortar mix. Simply add water for a consistent and convenient solution for various handyman, landscaping, plumbing, and repair applications.
- $12.95
- $12.95
- Unit price
- per
-
RLA Penapatch HB80 MortarVendor:RLAUse RLA Penapatch HB80 for high-strength structural concrete repairs requiring up to 68 MPa compressive strength. It allows high-build applications in a single pass and offers excellent resistance to chloride attack and carbonation, making it suitable for durable long-term reinstatement.
- $97.41
- $97.41
- Unit price
- per
-
RLA Penapatch HB50 MortarVendor:RLAPenapatch HB50 is a polymer-modified, fibre-reinforced, shrinkage-compensated structural repair mortar formulated for vertical, overhead and horizontal concrete repairs. Achieve high build in a single pass with excellent adhesion, low permeability and high ultimate strength — just add water.
- $85.68
- $85.68
- Unit price
- per
-
RLA Penapatch Fairing Coat MortarVendor:RLAUse RLA Penapatch Fairing Coat Mortar for thin-layer concrete repairs up to 5mm, providing a smooth, durable finish. Its fast 25-minute working time and negligible shrinkage ensure efficient, quality results for exposed or over-coated applications.
- $78.94
- $78.94
- Unit price
- per
-
30mm HexCell Wall Drainage Cell - Standard Duty 550Vendor:Drainage CellUse 30mm HexCell Drainage Cell for relieving hydrostatic pressure and protecting waterproofing on green roofs, podiums, and retaining walls. It provides 70 t/m² compressive strength and a 14,400 L/h/m² flow rate, ensuring robust and efficient sub-surface drainage.
- $38.46
- $38.46
- Unit price
- per
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
What's Popular
Vendor:
Use Adheseal PU15 for flexible, durable sealing of movement and connection joints up to ±30% and as an adhesive, offering excellent adhesion and weather resistance for confident, long-term performance.
- From $11.99
- From $11.99
- Unit price
- / per
Vendor:
Use Adheseal PU25FC for flexible sealing and bonding of movement joints in construction, marine, and manufacturing. It offers ±25% movement, fast curing at 3mm per day, AS/NZS 4020 potable water suitability, and is UV stable.
- From $11.12
- From $11.12
- Unit price
- / per
Vendor:
Use Adheseal PU50FC for high-strength, flexible structural bonding and demanding sealing jobs. It offers Shore A 45 hardness for anti-pick applications, withstands +/- 25% joint movement, and cures at 3mm per 24 hours.
- From $14.96
- From $14.96
- Unit price
- / per
Newest Products
New gear on the shelf — sealants, adhesives, grouts, mixing tools, and accessories that just landed at Adheseal. This is the stuff that's been requested, tested, and added because it does a job the range needed.Fast-cure polyurethane sealants for car bodies, low-modulus hybrids for dynamic joints, rapid-set screeds that hit...
New gear on the shelf — sealants, adhesives, grouts, mixing tools, and accessories that just landed at Adheseal. This is the stuff that's been requested, tested, and added because it does a job the range needed.
Fast-cure polyurethane sealants for car bodies, low-modulus hybrids for dynamic joints, rapid-set screeds that hit 2% moisture in 24 hours, epoxy adhesives for stone benchtop bonding, mixing paddles that actually last — it's all here. Browse below and grab what your next job demands.
Sidebar
BY ENVIRONMENT
BY PACKAGING
BY SUBSTRATE
BY APPLICATION
BY HANDLING NOTES
Frequently Asked Questions
Translation missing: en.t:sections.general.no_content
Recently Viewed Products
- Choosing a selection results in a full page refresh.