Aluminium Angle Unequal 60 × 25 has a wider 60mm face and shorter 25mm return, useful where an edge or fabricated panel needs generous coverage on one side without a matching projection on the other. This 6060-T5 mill-finish profile suits appropriate shopfitting, cladding trim and caravan fabrication details.
The stock section is 3mm thick. Compared with 70 × 25mm, it has 10mm less main-face coverage but a thicker listed wall. Choose by the required geometry and fabrication design; neither profile comes with a general structural load rating.
| Leg dimensions | 60 × 25 mm |
|---|---|
| Geometry | Unequal angle |
| Alloy / temper | 6060 T5 |
| Finish | Mill finish |
| Current stock | 3.0 mm × 3250 mm |
Available size: 3.0mm thick × 3250mm long. Measure the panel overlap and 25mm return, including any fastening clearances, before ordering.
Cut and deburr to suit the assembly. The mill finish may require cleaning and additional protection depending on the surrounding materials and exposure. Check fastening, loads and dissimilar-metal contact in the project design.
What stock options are available in 60 × 25 mm aluminium angle?
Current Adheseal stock is 3.0 mm × 3250 mm, supplied in 6060 T5 mill finish.
Aluminium Angle Unequal 60x25 Physical Properties
| Property | Value |
|---|---|
| Alloy | 6060 |
| Temper | T5 |
| Finish | Mill Finish |
| Form | Angle Extrusion |
| Strength to Weight Ratio | High |
| Corrosion Resistance | Excellent |
| Weldability | Excellent |
| Machinability | Good |
| Lengths Available | Varies by size |
| Processing Capabilities | Cutting, drilling, welding, anodising, powder coating, painting |
| Typical Applications | Vehicle body building, caravans, aerospace, shopfitting, frames, architectural frameworks |