-
Silicone Colour Sample ChartVendor:
Adheseal Silicone Colour Sample Chart- $0.00
$0.00- $0.00
- Unit price
- per
-
Everbond Melamine PVA AdhesiveVendor:
Use Everbond Melamine PVA Adhesive for reliable, clear bonding of melamine faced board in cabinet and furniture construction. Its specific adhesion to melamine ensures strong, consistent joints that dry clear, avoiding bond failures common with general purpose glues.
- From $105.18
- From $105.18
- Unit price
- per
-
Everbond Spray Contact SP-230Vendor:
Use Everbond SP-230 for high-strength, heat-resistant contact bonding across a broad range of substrates like laminates, foams, and fabrics. Its fast 3-5 minute dry time speeds up fabrication, providing reliable performance where heat and moisture resistance are critical.
- From $183.65
- From $183.65
- Unit price
- per
-
Everbond Plastabond PVAVendor:
Enhance mortar and render performance with Plastabond – a PVA-based bonding agent delivering improved adhesion, reduced shrinkage, and chemical resistance.
- From $70.46
- From $70.46
- Unit price
- per
-
Biyseal Bitumen Impregnated FoamVendor:
Biyseal Polyurethane Impregnated Foam delivers a reliable, long-lasting seal for expansion joints and weatherproofing, adapting to various environmental conditions.
- From $134.19
- From $134.19
- Unit price
- per
-
Biyseal Acrylic Impregnated FoamVendor:
Use Biyseal Acrylic Impregnated Foam for immediate, weather-tight sealing of dynamic joints; it offers over 90% elastic recovery and blocks heavy rain at 75% compression.
- $136.58
- $136.58
- Unit price
- per
-
Adheseal White SpiritsVendor:
White Spirits, also known as mineral turps, is a versatile and widely-used solvent in the Australian trades and construction industry
- $122.33
- $122.33
- Unit price
- per
-
Everflex JS Hybrid Acrylic SealantVendor:
Use Everflex JS for high-performance joint sealing in exterior and interior applications. It accommodates +/- 50% movement, offers superior adhesion without priming for most substrates, and resists weathering and UV without cracking.
- From $9.45
$0.00- From $9.45
- Unit price
- per
-
Window PackersVendor:
Use Window Packers for precise levelling and alignment of window frames, cladding, and joinery. These rigid, non-compressible packers prevent settlement, offering dimensional stability and fast, error-free installation with their colour-coded thicknesses.
- From $48.97
- From $48.97
- Unit price
- per
-
Plastic AngleVendor:B.A.TThis versatile plastic angle is a durable and lightweight solution for a variety of applications.
- From $18.67
- From $18.67
- Unit price
- per
-
Aluminium Angle Equal 76x76Vendor:
Use Aluminium Angles for lightweight structural framing and fabrication. The 6060 T5 alloy offers a high strength-to-weight ratio, excellent weldability, and superior corrosion resistance.
- From $133.03
- From $133.03
- Unit price
- per
-
Aluminium Angle Unequal 100x50Vendor:
Use Aluminium Angles for lightweight structural framing and fabrication. The 6060 T5 alloy offers a high strength-to-weight ratio, excellent weldability, and superior corrosion resistance.
- From $56.43
- From $56.43
- Unit price
- per
-
Anodized Aluminum Balcony Drip Angle (12mm x 5m)Vendor:
Use this 12mm anodised aluminium drip angle for balcony edges to prevent water tracking and fascia staining. Its angled lip directs water away, providing a clean finish and protecting building aesthetics.
- From $25.05
- From $25.05
- Unit price
- per
-
Megapoxy 108Vendor:
Use Megapoxy 108 for rapid, high-strength structural bonding and repair in civil engineering. It develops 95 MPa compressive strength in 2 hours, offers an ultimate 120 MPa, and cures in the presence of moisture.- From $250.41
$0.00- From $250.41
- Unit price
- per
-
Megapoxy 132Vendor:
Use Megapoxy 132 for high-performance epoxy floor coating in food processing, commercial kitchens, and industrial settings. This solvent-free, low VOC coating meets AS 4020:2018 Potable Water Approval and offers 120MPa ultimate compressive strength for demanding environments.
- From $195.36
- From $195.36
- Unit price
- per
-
Megapoxy 154Vendor:
Use Megapoxy 154 for priming and sealing concrete and masonry, especially on damp surfaces, to create a tough, chemical-resistant coating that handles foot and light vehicular traffic. Its water-based formulation provides excellent adhesion and penetration while serving as a moisture barrier.
- $700.00
- $700.00
- Unit price
- per
-
Megapoxy 34Vendor:
Use Megapoxy 34 for high-performance electrical encapsulation and cable jointing where AS3100 compliance and a 150°C peak service temperature are critical. It delivers 315 kV/cm dielectric strength for demanding applications.
- From $152.50
- From $152.50
- Unit price
- per
-
Megapoxy 63Vendor:
Use Megapoxy 63 for high-strength, non-shrinking epoxy bonding of stone and tile to masonry. It delivers mechanical strengths superior to concrete, ensuring durable, long-lasting connections.
- From $182.59
- From $182.59
- Unit price
- per
-
Megapoxy 84Vendor:
Use Megapoxy 84 for high-temperature bonding of ceramic tiles to steel or concrete, or for securing components in crushing machinery. It delivers a 120 MPa compressive strength and tolerates continuous 120°C service, ensuring durability where standard adhesives fail.
- $177.95
- $177.95
- Unit price
- per
-
Megapoxy CT5Vendor:
Megapoxy CT5 is an Australian-made compound designed for backfilling and encapsulating inductive detector loops, weigh-in-motion sensors, and Aircraft Landing Lights on asphaltic and concrete roadways.
- $605.72
- $605.72
- Unit price
- per
-
Megapoxy EVendor:
Use Megapoxy E for high-impact electrical encapsulation and casting, delivering up to 19 KV/mm dielectric strength and 100 MPa compressive strength. Choose Hardener 155 for continuous service up to 150°C.
- From $179.39
- From $179.39
- Unit price
- per
-
Megapoxy MCVendor:
Use Megapoxy MC for heavy-duty, chemical-resistant coating on concrete and steel, offering 100% solids, excellent abrasion resistance, and VOC-free hygienic protection in aggressive environments. Its high bond strength (>3Mpa concrete, 13Mpa steel) ensures lasting performance where other coatings fail.
- From $173.63
- From $173.63
- Unit price
- per
-
Sikaflex Pro Polyurethane Sealant 600ml SausagesVendor:
Use Sikaflex PRO for elastic movement and connection joints in concrete and masonry facades. It handles ±25% movement, is AS/NZS 4020 approved for potable water, and ensures durable, weather-resistant sealing.- From $16.48
- From $16.48
- Unit price
- per
-
Sikaflex Pro Polyurethane Sealant 300ml CartridgesVendor:
Use Sikaflex PRO for elastic sealing of movement and connection joints in concrete and masonry, offering ±25% movement capability and potable water approval for reliable performance.
- From $241.80
- From $241.80
- Unit price
- per
-
Sikaflex 11 FC + Polyurethane Adhesive and SealantVendor:
Sikaflex 11 FC+ is a single-part polyurethane adhesive and sealant that bonds concrete, masonry, wood, metal, glass, and ceramic while handling vertical and horizontal joint sealing. It suits facade joints, perimeter sealing, civil construction, and mixed-substrate bonding where you need movement capacity and a sandable, overpaintable finish.
- From $277.80
- From $277.80
- Unit price
- per
-
Sikaflex Construction AP+ Polyurethane SealantVendor:
Use Sikaflex Construction AP for reliable, elastic sealing of movement and connection joints, particularly on porous substrates. Its ±25% movement capability, non-sag application, and paintability ensure durable, professional finishes for facades and general construction.
- $311.80
- $311.80
- Unit price
- per
-
Sikasil Pool Silicone SealantVendor:
Use Sikasil Pool for high-performance sealing of joints in swimming pools and permanently wet areas. It offers excellent resistance to chlorine and fungal attack, with ±25% movement capability, preventing common failures in aquatic environments.
- From $312.00
- From $312.00
- Unit price
- per
-
Sika Primer-3 N Epoxy PrimerVendor:
Use Sika Primer-3 N to enhance adhesion for specific Sika sealants and adhesives on porous substrates and metals. Its solvent-based epoxy resin formula is water repellent and offers a short 30-minute flash-off time, ensuring robust system performance.
- From $71.45
$0.00- From $71.45
- Unit price
- per
-
Sikalastic®-1K MortarVendor:
Use Sikalastic-1K for flexible waterproofing and concrete protection. It provides crack-bridging ability up to 0.75 mm and resists negative pressure up to 2.5 bar for 72 hours, offering certified performance for drinking water contact and external membranes.
- $213.07
- $213.07
- Unit price
- per
-
Bostik 6S Silicone SealantVendor:
Use Bostik 6S Silicone for sanitary and tile joints in wet areas. Its neutral cure prevents unpleasant odours, and the effective fungicide inhibits mould, ensuring a clean, durable seal with ±25% movement.- From $180.00
- From $180.00
- Unit price
- per
-
Bostik Seal 'N' Flex One P390 Polyurethane Sealant 600ml - BlackVendor:
Use Bostik Seal N Flex One P390 for reliable sealing of construction and expansion joints that demand ±50% movement. It's a low modulus, one-component polyurethane sealant, acoustic rated and approved for potable water contact, preventing joint failure in dynamic environments.
- From $322.60
- From $322.60
- Unit price
- per
-
Black
-
Grey
-
White
-
Bostik Seal 'N' Flex One P390 Polyurethane Sealant 300ml - GreyVendor:
Use Bostik Seal N Flex One P390 for reliable sealing of construction and expansion joints that demand ±50% movement. It's a low modulus, one-component polyurethane sealant, acoustic rated and approved for potable water contact, preventing joint failure in dynamic environments.
- $355.80
- $355.80
- Unit price
- per
-
Grey
-
White
-
Bostik Seal ‘N’ Flex One Plus P590 Polyurethane Sealant 600mlVendor:
Use Bostik Seal 'N' Flex One Plus P590 for construction and expansion joints needing high movement capability. It offers +100% / -50% joint movement with bubble-free curing and AS/NZS 4020:2018 potable water certification.
- From $322.60
$310.60- From $322.60
- Unit price
- per
-
Bostik Ultraset® SF Polyurethane Flooring AdhesiveVendor:
Use Bostik Ultraset SF for direct stick timber and bamboo flooring over concrete, offering EN 14293 compliance, 600% elongation, and zero VOC for a reliable, flexible bond.
- $310.40
- $310.40
- Unit price
- per
-
SA Sanitary Silicone SealantVendor:Sealants AustralasiaUse SA Sanitary Silicone Sealant for reliable, mould-resistant sealing in kitchens, bathrooms, and shower screens. Its 100% oxime neutral cure offers excellent adhesion across diverse substrates with ±25% dynamic joint movement, preventing mildew in humid conditions.
- From $7.40
- From $7.40
- Unit price
- per
-
Pasco Hypersil 911 Silicone SealantVendor:
Use Pasco Hypersil 911 for durable, flexible, and non-corrosive sealing of glazing and construction joints. Its 100% neutral cure silicone formula ensures UV stability and ±25% joint movement capability, protecting sensitive metals and stone.- $161.20
- $161.20
- Unit price
- per
-
Pasco Hypersil 912 Silicone SealantVendor:
Use Pasco Hypersil 912 for sealing wet areas like showers, kitchens, and laundries. This neutral cure, 100% silicone sealant resists mould and mildew, offers ±25% joint movement, and will not corrode metal.
- $161.20
- $161.20
- Unit price
- per
-
Fatrafol 804 Unreinforced Waterproofing MembraneVendor:FatraFatrafol 804 is a UV-resistant, unreinforced PVC waterproofing membrane designed for detailed finishing and joining within Fatrafol reinforced roofing systems. It's ideal for use on roofs and must be installed by trained professionals.
- From $960.00
- From $960.00
- Unit price
- per
-
Ardex X 18 Tile AdhesiveVendor:
Use ARDEX X 18 for demanding wall and floor tiling, including swimming pools and external areas. Its C2 TE S1 classification ensures improved bond, non-slump, extended open time, and flexibility, backed by Green Star compliance.- From $48.35
- From $48.35
- Unit price
- per
-
Ardex X56 Tile AdhesiveVendor:
Use ARDEX X56 for fixing tiles to demanding substrates like internal timber and early-age concrete, allowing grouting in just 4 hours due to its C1 E S2 flexibility.
- $136.96
- $136.96
- Unit price
- per
-
Ardex Multiprime PrimerVendor:
Use ARDEX Multiprime for priming porous concrete, render, and AAC to improve adhesion for ARDEX systems. It dries in 15-30 minutes and offers reliable bond strength for demanding applications, avoiding issues caused by untreated substrates.
- $301.48
- $301.48
- Unit price
- per
-
Ardex AF 171 Universal Vinyl AdhesiveVendor:
Use ARDEX AF 171 for installing vinyl tiles, planks, sheet vinyl, linoleum, and rubber flooring. It provides high plasticiser migration resistance and strong final bond, ensuring long-term floor covering performance.
- $180.70
- $180.70
- Unit price
- per
-
Ardex RA 88 Plus Multi-Purpose Epoxy Repair AdhesiveVendor:
Use ARDEX RA 88 PLUS for high-performance epoxy bonding and non-moving repairs on concrete and other materials, offering 87 MPa compressive strength and AS/NZS4020 potable water compliance in a non-sag, trowelable format.
- $143.73
- $143.73
- Unit price
- per
-
Ardex RA 142 Structural Crack Injection EpoxyVendor:
Use ARDEX RA 142 for structural concrete crack injection and bonding, specifically targeting hairline to 3mm cracks. Its 190 cps low viscosity ensures deep penetration, delivering 70 MPa compressive strength to restore integrity.
- $143.22
- $143.22
- Unit price
- per
-
Ardex RA 54 Joint SealantVendor:
Use ARDEX RA 54 for fast-setting, semi-rigid filling of concrete control joints and new construction saw joints in heavy-duty traffic areas. It cures rapidly, allowing traffic in just 90 minutes, providing a Shore A Hardness of 75-80 for robust performance.
- From $93.93
- From $93.93
- Unit price
- per
-
Gripset Elastoproof Base CollarsVendor:
Pre-formed, stretchable waterproofing collars for sealing around pipe and service penetrations. Made from Gripset’s Elastoproof fabric with a central elastomeric zone, ensuring a watertight, flexible seal that integrates with liquid membranes. Available in multiple sizes for various pipe diameters.- From $22.52
- From $22.52
- Unit price
- per
-
Gripset 51 MembraneVendor:
Use Gripset 51 for flexible, solvent-free waterproofing of underground and external structures. Its >500% elongation bridges cracks, providing robust protection against water, rot, and corrosion in continuously damp environments.
- From $71.51
- From $71.51
- Unit price
- per
-
Gripset Xpress Multi Pro MembraneVendor:
Use Gripset Xpress Multi Pro for waterproofing roofs, balconies, and wet areas where fast project turnaround is critical. It's rain-resistant in 3 hours, withstands ponding water, and remains highly flexible for lasting protection.
- $389.93
- $389.93
- Unit price
- per
-
Gripset BRW HDVendor:
Use Gripset BRW HD for instant, flexible subterranean and wet area waterproofing. Its self-adhesive butyl rubber and HDPE construction eliminates curing delays, resists extreme temperatures from -30°C to 80°C, and stands up to ground salts.
- $462.21
- $462.21
- Unit price
- per
-
RLA Penatech HS GroutVendor:RLAUse RLA Penatech HS Grout for critical structural grouting from 10mm to 150mm, ensuring non-shrink performance with dual expansion and compressive strengths up to >85 MPa. It meets ASTM C1107-91 and handles dynamic loads, providing a reliable, stain-free solution.
- $53.15
- $53.15
- Unit price
- per
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
What's Popular
Vendor:
Use Adheseal PU15 for flexible, durable sealing of movement and connection joints up to ±30% and as an adhesive, offering excellent adhesion and weather resistance for confident, long-term performance.
- From $11.99
- From $11.99
- Unit price
- / per
Vendor:
Use Adheseal PU25FC for flexible sealing and bonding of movement joints in construction, marine, and manufacturing. It offers ±25% movement, fast curing at 3mm per day, AS/NZS 4020 potable water suitability, and is UV stable.
- From $11.12
- From $11.12
- Unit price
- / per
Vendor:
Use Adheseal PU50FC for high-strength, flexible structural bonding and demanding sealing jobs. It offers Shore A 45 hardness for anti-pick applications, withstands +/- 25% joint movement, and cures at 3mm per 24 hours.
- From $14.96
- From $14.96
- Unit price
- / per
Special Order
Some jobs need products you won't find on every shelf — high-movement silicone sealants for aquatic environments, AS 4654-approved polyurethane membranes for exposed rooftops, structural epoxy grouts rated for drinking water contact, and adjustable pedestal systems for raised decking and terrace installations. These are the products that solve the spec...
Some jobs need products you won't find on every shelf — high-movement silicone sealants for aquatic environments, AS 4654-approved polyurethane membranes for exposed rooftops, structural epoxy grouts rated for drinking water contact, and adjustable pedestal systems for raised decking and terrace installations. These are the products that solve the spec jobs where off-the-shelf won't cut it.
This range brings together sealants, waterproofing membranes, epoxy compounds, concrete repair grouts, primers and pedestal systems from brands like Sika, Duram, Buzon, Megapoxy, Gripset, RLA and Bostik. If your spec calls for potable water certification, ±50% movement capability, fire-rated compliance or chemical-resistant encapsulation, you'll find the product here — just allow lead time for ordering.
Sidebar
Frequently Asked Questions
Translation missing: en.t:sections.general.no_content
Recently Viewed Products
- Choosing a selection results in a full page refresh.