-
RLA Penatech HES GroutVendor:RLAUse RLA Penatech HES Grout for critical support and anchoring applications requiring fast load bearing. It delivers over 60 MPa compressive strength in 24 hours with dual-stage shrinkage compensation and AS1478 Class C compliance.
- $70.86
- $70.86
- Unit price
- per
-
RLA UW Penaflow GroutVendor:RLAUse RLA Penaflow Panel Grout for critical non-shrink grouting of precast elements, anchor bolts, and voids. It delivers over 55 MPa strength at 28 days with 0% bleed and consistent plastic state expansion.
- $71.94
- $71.94
- Unit price
- per
-
RLA Trulevel Econoscreed RapidVendor:RLAUse RLA TruLevel EconoScreed Rapid for rapid subfloor preparation where floor coverings need to go down fast. It achieves 65 MPa compressive strength and allows ceramic tiles in 4-6 hours, making it ideal for high-traffic and wet areas.
- $41.48
- $41.48
- Unit price
- per
-
RLA True Level FlexiVendor:RLAUse RLA TruLevel Flexi for internal levelling of concrete and timber subfloors from 1-20mm. Its fibre-reinforced, flexible formulation prevents cracking, achieves foot traffic in 2-3 hours, and allows floor covering installation in 12-24 hours.
- $103.29
- $103.29
- Unit price
- per
-
RLA TruLevel Fine FinishVendor:RLAUse RLA TruLevel Fine Finish for rapid skim smoothing of internal concrete and masonry substrates up to 3mm thick. It provides a smooth base ready for floor coverings in just 20 minutes, ensuring quick project turnaround without compromise.
- From $126.07
- From $126.07
- Unit price
- per
-
RLA Universal PrimerVendor:RLAUse RLA Universal Primer to manage suction on porous concrete or promote adhesion on non-porous surfaces like tiles. This water-based acrylic primer dries tack-free in 30-60 minutes, preventing bond failures before tiling or levelling.
- From $121.14
- From $121.14
- Unit price
- per
-
RLA Moisture Seal PrimerVendor:RLAUse RLA Moisture Seal as a high-performance 2-part epoxy barrier against moisture and vapour. It withstands 2.5 bar of hydrostatic pressure and can be applied to damp or "green" concrete, preventing moisture-related failures under overlaid finishes.
- $459.03
- $459.03
- Unit price
- per
-
RLA Polymastic Acrylic AdhesiveVendor:RLAUse RLA Polymastic for internal wall tiling, bonding porous ceramic, mosaic, and large format tiles with its D1TE non-slump classification and excellent workability.
- $112.91
- $112.91
- Unit price
- per
-
RLA 2 Part Cementitious MembraneVendor:RLAUse RLA 2 Part Cementitious Membrane for demanding immersion and potable water applications. This Class II flexible membrane is AS 4020 certified for drinking water and offers 214% elongation, ensuring a durable, compliant waterproof barrier under tiles.
- $251.23
- $251.23
- Unit price
- per
-
RLA Foam FillerVendor:RLAUse RLA Foam Filler for high-yield filling and sealing of irregular gaps and cavities. It expands up to 45 times to form a stable, airtight seal, reducing callbacks from drafts and noise without distorting frames.
- From $20.00
- From $20.00
- Unit price
- per
-
Mapesil AC Silicone SealantVendor:
Use Mapesil AC for elastic, mould-resistant sealing of expansion joints in wet areas and general construction, offering ±25% movement and 40 colour options for a professional, durable finish.- From $172.56
- From $172.56
- Unit price
- per
-
Mapei Mapeproof Swell SealantVendor:
Use Mapei Mapeproof Swell Sealant for watertight sealing of confined joints, cracks, and penetrations in concrete. This hydro-expansive paste swells by ≥100% on water contact, resisting up to 1 atm of hydrostatic pressure for reliable protection against leaks.
- $332.94
- $332.94
- Unit price
- per
-
Mapei Primer GVendor:
Use Mapei Primer G for critical substrate preparation, ensuring stable adhesion and preventing common failures like ettringite formation between gypsum and cement-based materials. It offers EC1 Plus low VOC emissions and fast drying.
- From $57.91
- From $57.91
- Unit price
- per
-
Mapei Eco Prim T Plus PrimerVendor:
Solvent-free acrylic primer with excellent adhesion, flexibility, and water resistance. Suitable for concrete, ceramic, wood, and other internal flooring substrates.
- From $103.16
- From $103.16
- Unit price
- per
-
Mapei Mapegrout T40 MortarVendor:
Use Mapegrout T40 for R3 structural concrete repairs requiring medium mechanical performance. This 40 MPa, shrinkage-compensated, fibre-reinforced mortar applies without slump on vertical surfaces, ensuring durable and compliant repairs.
- $86.31
- $86.31
- Unit price
- per
-
Planitop Fine Finish MortarVendor:
Use Planitop Fine Finish for feather-edge skim coating and levelling concrete surfaces up to 3mm. It delivers a breathable, uniform finish that is paintable in 7 days, avoiding surface imperfections under coatings.
- $107.31
- $107.31
- Unit price
- per
-
Mapei Keracolor FF Bioblock GroutVendor:
Use Mapei Keracolor FF Bioblock for grouting tile joints up to 6mm, especially in wet or high-traffic areas. Its CG2WA classification confirms high abrasion resistance and low water absorption, preventing mould and ensuring a durable finish.
- From $15.33
$19.17- From $15.33
- Unit price
- per
-
Mapei Keracolor GG Cementitious GroutVendor:
Use Keracolour GG for grouting tile joints from 4 to 15 mm, internally and externally. Its CG2WA classification confirms high abrasion resistance and reduced water absorption, ensuring durability against freeze/thaw cycles and heavy traffic.
- From $27.98
- From $27.98
- Unit price
- per
-
Mapei Mapecemp Pronto ScreedVendor:
Use Mapecem Pronto for rapid-set screeds where project timelines and moisture control are critical. It allows flooring installation in 24 hours with less than 2% residual moisture, ensuring predictable project scheduling.
- $34.30
- $34.30
- Unit price
- per
-
Mapei UC LevellerVendor:
Use Mapei UC Leveller for rapid deep-fill levelling of interior floors up to 70mm. It achieves C25-F7 strength, allowing flooring installation in 24 hours and keeping projects on schedule.
- $46.76
- $46.76
- Unit price
- per
-
Mapegrout Fast-Set RapidoVendor:
Use Mapegrout Fast-Set Rapido for rapid structural concrete repairs. It achieves over 10 MPa compressive strength in 3 hours, holds 20-25 mm vertically without slump, and is classified R3 for efficient site turnaround.
- $82.39
- $82.39
- Unit price
- per
-
Mapei Keraflex Maxi S1 Cementitious AdhesiveVendor:
Use Keraflex Maxi S1 for large format tiles and natural stone on walls and floors. Its C2TE S1 rating ensures no vertical slip and excellent deformability, making it reliable for challenging installations that need extended open time.
- From $43.33
- From $43.33
- Unit price
- per
-
Mapei Kerapoxy AdhesiveVendor:
Use Kerapoxy Adhesive for demanding tile and stone installations where strength and chemical resistance are critical. Its R2T classification provides no vertical slip and excellent long-term bond, preventing failures in pools and external areas.
- $181.98
- $181.98
- Unit price
- per
-
Mapei Mapeband Easy Joint TapeVendor:
Use Mapeband Easy for bridging movement joints and changes of plane in waterproofing systems. Its rubber core offers 315% elongation, preventing membrane rupture at critical wall-floor junctions and expansion joints.
- $118.48
- $118.48
- Unit price
- per
-
Mapei Kerapoxy Easy Design Grout and AdhesiveVendor:
Use Mapei Kerapoxy Easy Design for grouting 1-15mm joints and adhering tiles in demanding environments. This acid-resistant, bacteriostatic epoxy is certified for hygiene, delivers high mechanical strength, and offers decorative flexibility with add-ins.
- From $95.50
- From $95.50
- Unit price
- per
-
Mapei Lamposilex (Waterplug)Vendor:
Use Mapei Lamposilex to instantly stop active water leaks in concrete and masonry. It sets in 90 seconds, withstands pressurised water, and is AS/NZS 4020:2018 certified for potable water contact.
- From $49.53
- From $49.53
- Unit price
- per
-
Mapei MapecempVendor:
Use Mapei Mapecemp for rapid-drying floor screeds ready for tiles in 3-4 hours and moisture-sensitive flooring in 24 hours with less than 2% residual moisture, preventing project delays and callbacks.
- $69.18
- $69.18
- Unit price
- per
-
Mapei Planicrete SPVendor:
White SBR latex admixture for cement screeds, renders and bonding slurries; EN 1542 adhesion exceeds 2.0 MPa after 28 days in the reference mortar.
- $144.73
- $144.73
- Unit price
- per
-
Mapei Topcem Pronto SlurryVendor:
Use Mapei Topcem Pronto Slurry for bonding screeds to concrete substrates. It ensures a full wet-on-wet bond, preventing delamination and callbacks for interior and exterior jobs.
- $27.44
- $27.44
- Unit price
- per
-
GCP Epocote F100W Clear Epoxy PrimerVendor:
GCP Epocote F100W is a clear, two-pack, water-based epoxy primer and sealer. Designed for priming damp or green concrete, it offers an exceptionally long pot-life and fast cure, ensuring a tough, chemically resistant bond for professional waterproofing membrane systems.- From $471.81
- From $471.81
- Unit price
- per
-
Silcor Top Coat 80 Waterproof MembraneVendor:
Protect exposed SILCOR membrane roofs, decks and balconies with a UV-resistant non-slip top coat, 0.15 mm DFT and 2 hour drying at 25°C.
- From $691.21
- From $691.21
- Unit price
- per
-
Silcor 575 MembraneVendor:
Use SILCOR 575 LB for Class III compliant waterproofing on horizontal balconies, green roofs, and internal wet areas. Its 800%+ elongation and seamless application prevent callbacks from movement or joints.
- $316.77
- $316.77
- Unit price
- per
-
Silcor 580 MembraneVendor:
Use SILCOR 580 for certified heavy-duty trafficable waterproofing on car parks, balconies, and internal wet areas. This two-part polyurethane delivers over 700% elongation and 7MPa tensile strength, ensuring crack bridging and long-term performance under demanding conditions.
- $699.00
- $699.00
- Unit price
- per
-
Duram Azcothane ReoVendor:
Use Duram Azcothane Reo for protected wet area and balcony waterproofing where AS 4858 compliance is required. Its internal microfibre reinforcement provides 311% elongation and passes cyclic movement tests, allowing for direct stick tiling without external fabric in most cases.- $167.05
- $167.05
- Unit price
- per
-
Duram 195Vendor:
Use Duram 195 as a Class III elastomeric waterproofing membrane for non-exposed areas, providing 400% elongation and Green Star compliant low VOCs. It requires a dry substrate and must be covered or top-coated with Multithane ATC for UV exposure.
- $319.58
- $319.58
- Unit price
- per
-
Duram AzcosealVendor:
Use Duram Azcoseal as a clear penetrative sealer for porous surfaces or as a robust primer to enhance adhesion of Duram waterproofing membranes. It's touch dry in 1-2 hours, UV resistant, and uses cross-linking technology for a strong system bond.
- $239.02
- $239.02
- Unit price
- per
-
-
-
-
B.A.T Pro Folding Utility KnifeVendor:B.A.TUse the B.A.T Pro Folding Utility Knife for precise cutting and scoring of membranes and various construction materials. Its durable aluminium body and non-slip rubber grip provide control, helping prevent substrate damage and site injuries.
- From $16.20
- From $16.20
- Unit price
- per
-
BAT Trims Tile CrossesVendor:B.A.TUse BAT Trims Tile Crosses for consistent, professional grout lines in wall tiling. Non-compressible polypropylene ensures precise alignment and is compatible with all common tile adhesives.
- From $3.17
- From $3.17
- Unit price
- per
-
BAT Heavy Duty Paint Roller FrameVendor:B.A.TA robust and reliable tool for painting projects, the 230mm Standard Roller Frame is designed for durability and ease of use.
- From $8.20
- From $8.20
- Unit price
- per
-
BAT Eco SynSafe AcidVendor:B.A.TUse BAT Eco SynSafe Acid for safe descaling, etching concrete, and cleaning masonry. Its non-fuming, biodegradable organic compound provides industrial-strength dissolving power without the burn risk of traditional acids.
- From $34.42
- From $34.42
- Unit price
- per
-
BAT Trims Tile WedgesVendor:B.A.TUse BAT Trims Tile Wedges for precise tile levelling and consistent grout lines. Their tapered design allows 0-5mm adjustment, suitable for ceramic, porcelain, and stone, and they are reusable for multiple projects.
- From $6.67
- From $6.67
- Unit price
- per
-
BAT Trim Chalk Line ReelVendor:B.A.TMark any surface with the BAT Trim Chalk Line Reel.
- $25.92
- $25.92
- Unit price
- per
-
BAT Trim Chalk Line RefillVendor:B.A.TThe BAT Trim Chalk Line Refill is designed to replenish your BAT Trim Chalk Line tool, ensuring continued accuracy and visibility for your marking needs. This high-quality chalk produces clear, vibrant lines that are easy to see on various surfaces.
- $22.67
- $22.67
- Unit price
- per
-
Armadillo DVendor:ArmadilloUse Armadillo D to densify and dustproof concrete floors, chemically reacting with the substrate to create a harder, more abrasion-resistant surface. It is after-trades compatible and Green Star compliant for enhanced project outcomes.
- $283.67
- $283.67
- Unit price
- per
-
Lauxes Standard Floor Grate 70mm x 23mm – Midnight BlackVendor:
The original Lauxes Standard Floor Grate in a striking Midnight Black anodised finish. 100% UV stabilised, trafficable up to 10.2 tonnes and backed by a Lifetime Rustproof Warranty. Available in multiple lengths with custom pre-cut options.- From $13.56
- From $13.56
- Unit price
- per
-
Lauxes Grates NeXT Generation NXT35 Linear Drain KitVendor:
Use Lauxes Grates NeXT Generation NXT35 for heavy-duty linear drainage in outdoor areas. With a 10.3 tonne load rating and a lifetime rustproof warranty on its anodised aluminium, it handles vehicle traffic and coastal conditions while preventing water tracking.
- From $14.99
- From $14.99
- Unit price
- per
-
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
What's Popular
Vendor:
Use Adheseal PU15 for flexible, durable sealing of movement and connection joints up to ±30% and as an adhesive, offering excellent adhesion and weather resistance for confident, long-term performance.
- From $11.99
- From $11.99
- Unit price
- / per
Vendor:
Use Adheseal PU25FC for flexible sealing and bonding of movement joints in construction, marine, and manufacturing. It offers ±25% movement, fast curing at 3mm per day, AS/NZS 4020 potable water suitability, and is UV stable.
- From $11.12
- From $11.12
- Unit price
- / per
Vendor:
Use Adheseal PU50FC for high-strength, flexible structural bonding and demanding sealing jobs. It offers Shore A 45 hardness for anti-pick applications, withstands +/- 25% joint movement, and cures at 3mm per 24 hours.
- From $14.96
- From $14.96
- Unit price
- / per
Special Order
Some jobs need products you won't find on every shelf — high-movement silicone sealants for aquatic environments, AS 4654-approved polyurethane membranes for exposed rooftops, structural epoxy grouts rated for drinking water contact, and adjustable pedestal systems for raised decking and terrace installations. These are the products that solve the spec...
Some jobs need products you won't find on every shelf — high-movement silicone sealants for aquatic environments, AS 4654-approved polyurethane membranes for exposed rooftops, structural epoxy grouts rated for drinking water contact, and adjustable pedestal systems for raised decking and terrace installations. These are the products that solve the spec jobs where off-the-shelf won't cut it.
This range brings together sealants, waterproofing membranes, epoxy compounds, concrete repair grouts, primers and pedestal systems from brands like Sika, Duram, Buzon, Megapoxy, Gripset, RLA and Bostik. If your spec calls for potable water certification, ±50% movement capability, fire-rated compliance or chemical-resistant encapsulation, you'll find the product here — just allow lead time for ordering.
Sidebar
Frequently Asked Questions
Translation missing: en.t:sections.general.no_content
Recently Viewed Products
- Choosing a selection results in a full page refresh.