-
Megapoxy 84Vendor:
Use Megapoxy 84 for high-temperature bonding of ceramic tiles to steel or concrete, or for securing components in crushing machinery. It delivers a 120 MPa compressive strength and tolerates continuous 120°C service, ensuring durability where standard adhesives fail.- $177.95
- $177.95
- Unit price
- per
-
Megapoxy HICBVendor:
Use Megapoxy HICB for heavy-duty backing and grouting in crushers and mills. Its 115 MPa compressive strength and 20 MPa steel bond provide critical impact and structural reinforcement, preventing movement and extending equipment life where standard grouts fail.
- $148.06
- $148.06
- Unit price
- per
-
Permabond 102Vendor:PermabondUse Permabond 102 for fast, general-purpose bonding of close-fitting components made from plastics, rubber, and metals. It achieves handling strength in 5-15 seconds and is approved to MIL-A-46050C for reliable performance in critical assemblies.
- From $42.46
- From $42.46
- Unit price
- per
-
Permabond 240Vendor:PermabondUse Permabond 240 for rapid, high-strength bonding across plastics, rubber, and metals, reliably filling gaps up to 0.4 mm and excelling on porous surfaces where other instant adhesives fall short.
- From $42.46
- From $42.46
- Unit price
- per
Frequently Asked Questions
What are instant adhesives used for on a line?
Permabond 102 and 240 fix close-fitting plastics, rubber, and metals in seconds. 102 runs into narrow gaps. 240 is high-viscosity and fills slight gaps. Keep parts aligned before they touch.
What is Megapoxy HICB for?
It is a pourable epoxy grout that backs metal liner plates and fills gaps in crushers, gyratory crushers, and grinding mills. It takes impact and heavy machinery loads. Follow the mixing and placement rules.
Can Megapoxy 84 fix worn machine parts?
It bonds alumina ceramic wear tiles to steel and concrete and locks crusher bushings. It handles heat and wear. It is not a general repair paste: check thickness, substrate, and temperature against the data sheet.
Which product gives the fastest fixture time?
The cyanoacrylates. They fixture in seconds at room temperature. The epoxies need hours and give high strength. Use cyanoacrylates for alignment and small parts, and epoxy for load-bearing lining and grouting.
How should I prepare machinery surfaces?
Grit-blast or grind to bare, sound metal or concrete. Degrease with a compatible cleaner and dry the surface. Warm the substrate if the data sheet asks. Mixed epoxies need exact ratios and a timed pot life.