-
Open Cell Backing Rod - SquareVendor:
Square-section open-cell backing rod for square and rectangular joints. It sits in the base of the joint to set the sealant depth and stop three-sided adhesion, which is what cracks beads.Open cell structure lets gas out, so the sealant cures without bubbling from the...- From $3.06
- From $3.06
- Unit price
- per
-
Adheseal Backing Rod Closed Cell - RoundVendor:
For expansion joints, window glazing, precast panels, and bridge construction where three-sided sealant adhesion must be prevented, Adheseal Backing Rod Closed Cell - Round provides the essential depth control and bond-breaking foundation. This flexible, low-density white polyethylene foam rod establishes the correct joint profile...
- From $12.30
- From $12.30
- Unit price
- per
-
Biyseal Bitumen Impregnated FoamVendor:
For sealing metal cladding, expansion joints, roof valleys, and building penetrations against weather, dust, and vermin, Biyseal Bitumen Impregnated Foam provides a compressible, pre-formed barrier that expands and contracts without losing its recovery properties. Impregnated with bitumen, this flexible polyurethane strip exerts continuous outward...
- From $134.19
- From $134.19
- Unit price
- per
-
Biyseal Acrylic Impregnated FoamVendor:
For sealing expansion joints, roof cladding, and window or door perimeters against weather, Biyseal Acrylic Impregnated Foam provides a highly compressible barrier that adapts to continuous joint movement. This high-density polyurethane foam is impregnated with an acrylic solution, allowing it to expand and contract...
- $136.58
- $136.58
- Unit price
- per
-
Adheseal IPA CleanerVendor:
For prep work prior to applying adhesives, sealants, or surface primers, Adheseal IPA Cleaner removes surface contaminants to ensure a clean substrate and a reliable bond. This 100% isopropyl alcohol cleaner removes fluxes, light oils, grime, and oxides, then evaporates within seconds without leaving...
- From $17.50
- From $17.50
- Unit price
- per
-
Adheseal Mineral TurpentineVendor:
Turps: the workshop solvent for cleaning oil-based paint off brushes and rollers, degreasing tools and machinery, and thinning oil-based products where the label allows.Flammable and smelly, same as always. Lid on when not in use, away from ignition, and rags soaked in it go...
- $138.33
- $138.33
- Unit price
- per
-
Methylated Spirits 95%Vendor:
For preparing substrates before adhesive or sealant application, removing wet adhesives, and cleaning tools, Adheseal Methylated Spirits 95% is a denatured alcohol formulated for use on non-porous surfaces. It functions as a rapid-evaporating solvent that leaves no residue, ensuring a clean surface for optimal...
- $146.73
- $146.73
- Unit price
- per
-
Adheseal Toluene SolventVendor:
Toluene is a strong solvent for removing spray contact adhesive, polyurethane sealants, and other stubborn residues from tools and hard surfaces. It works fast where gentler cleaners give up.It is also hazardous: highly flammable and harmful if inhaled. Outdoors or with serious ventilation, no...
- From $17.50
- From $17.50
- Unit price
- per
-
Adheseal White SpiritsVendor:
White Spirits, also known as mineral turps, is a versatile and widely-used solvent in the Australian trades and construction industry. Its milder formulation makes it an ideal choice for cleaning tools, equipment, and surfaces, as well as thinning certain paints and coatings.
- $122.33
- $122.33
- Unit price
- per
-
Adheseal EP Waterproofing SystemVendor:
For concrete, brick, mortar, and natural stone structures vulnerable to water ingress, dampness, and surface dusting, EP Waterproofing System permanently seals and hardens masonry from the inside. Instead of forming a temporary surface film that can peel or wear away, this translucent, inorganic liquid...
- From $150.00
- From $150.00
- Unit price
- per
-
Adheseal Showerseal SealerVendor:
For leaking showers, balconies, and tiled wet areas where lifting tiles is not an option, Showerseal Sealer penetrative treatment seals porous substrates from within. This clear siloxane/silane solution penetrates deep below the surface to create an internal hydrophobic barrier, stopping water ingress and reducing...
- $65.00
- $65.00
- Unit price
- per
-
Corflute Protection BoardVendor:
A 2mm corrugated polypropylene protection board, 1805mm x 1210mm, laid over waterproofing membranes before backfill, screeds, or other trades get on site. It takes the impact and puncture load so the membrane underneath does not. Light enough to carry and cut with a knife,...
- From $7.41
- From $7.41
- Unit price
- per
-
Sunstate Dried Silica SandVendor:
For industrial, chemical, and manufacturing applications requiring an exceptionally clean, graded aggregate, Sunstate Dried Silica Sand provides a high-purity source of silicon dioxide with a controlled particle size distribution. The sand is dried and processed to ensure a consistent grading between 0.105mm and 0.425mm,...
- From $26.43
- From $26.43
- Unit price
- per
-
Industrial BrushVendor:
A natural hog bristle brush for oil-based paints, varnishes, resins, and anti-fouling coatings. The stiff natural bristle carries thick material and lays it out evenly where synthetic brushes would go limp.Flick the bristles out before first use to shed the loose ones. Widths from...
- From $1.00
- From $1.00
- Unit price
- per
-
Disposable Overalls (XXL)Vendor:
Disposable Overalls (XXL) provide essential protective coverage for high-volume interior painting, drywall sanding, and industrial maintenance tasks. These garments feature a lightweight and breathable fabric designed to prevent heat buildup during active labor while ensuring a reliable barrier against paint overspray, varnish, grease, and...
- $9.20
$14.90- $9.20
- Unit price
- per
-
Polyester Reinforcing Fabric - Easy FoldVendor:
Polyester Reinforcing Fabric - Easy Fold is a versatile, non-woven polyester mat designed to reinforce corners and joints in waterproofing membrane installations. Its unique "easy fold" design makes it incredibly simple to create precise and secure folds, even in tight spaces. This fabric enhances...
- $32.76
- $32.76
- Unit price
- per
-
Polyester Reinforcing Fabric - Easy FormVendor:
Polyester Reinforcing Fabric - Easy Form is a specially designed reinforcing fabric for waterproofing applications where the substrate is rough or uneven. This softer, more flexible polyester mat conforms easily to irregular surfaces, providing additional strength and reinforcement at critical areas like corners and...
- From $27.61
- From $27.61
- Unit price
- per
-
Fibreglass Reinforcing Mat 225gsmVendor:
The Fibreglass Reinforcing Mat 225gsm is a high-quality fibreglass mat designed for reinforcing corners and joints in waterproofing applications. With its 225gsm weight, this fibreglass mat provides strength and stability to waterproofing systems, ensuring long-lasting protection against water intrusion. Uses: Ideal for reinforcing corners...
- From $39.75
- From $39.75
- Unit price
- per
-
Polyurethane HobsVendor:
A pre-formed polyurethane shower hob, 1200mm x 75mm x 50mm, that replaces the old timber-and-screed hob build. Light enough to carry one-handed, cut with a hand saw, and ready for waterproofing membrane straight after fixing.Fix it to the slab, corner-seal it, and membrane over...
- From $9.46
- From $9.46
- Unit price
- per
-
Everflex JS Hybrid Acrylic SealantVendor:
For sealing interior and exterior expansion joints subject to movement, Everflex JS Hybrid Acrylic Sealant provides a low-modulus barrier that withstands weathering without cracking. This water-based joint sealer adheres to most building materials without priming and accommodates significant thermal and structural movement in both...
- From $9.45
$0.00- From $9.45
- Unit price
- per
-
Window PackersVendor:
Horseshoe plastic packers for levelling and spacing around bolts and fixings. Slide one in around the bolt without removing it, and the frame or panel sits at true height and square before you tighten it off.Glazing frames, facade panels, cladding, doors: anywhere a fixing...
- From $48.97
- From $48.97
- Unit price
- per
-
Aluminium Angle Unequal 25x12Vendor:
Aluminium Angle Unequal 25x12 is a 6060 T5 mill-finish aluminium L-section with 25 × 12 mm unequal legs. The unequal 25 × 12 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- $7.46
- $7.46
- Unit price
- per
-
Aluminium Angle Unequal 32x20Vendor:
Aluminium Angle Unequal 32x20 is a 6060 T5 mill-finish aluminium L-section with 32 × 20 mm unequal legs. The unequal 32 × 20 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- From $13.64
- From $13.64
- Unit price
- per
-
Aluminium Angle Unequal 40x20Vendor:
Aluminium Angle Unequal 40x20 is a 6060 T5 mill-finish aluminium L-section with 40 × 20 mm unequal legs. The unequal 40 × 20 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- From $16.52
- From $16.52
- Unit price
- per
-
Aluminium Angle Equal 40x40Vendor:
Aluminium Angle Equal 40x40 is a 6060 T5 mill-finish aluminium L-section with 40 × 40 mm equal legs. The equal 40 × 40 mm legs give the same return on both sides of the 90° corner. It is stocked for general fabrication, caravan and...
- $20.28
- $20.28
- Unit price
- per
-
Aluminium Angle Unequal 50x25Vendor:
Aluminium Angle Unequal 50x25 is a 6060 T5 mill-finish aluminium L-section with 50 × 25 mm unequal legs. The unequal 50 × 25 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- From $17.23
- From $17.23
- Unit price
- per
-
Aluminium Angle Unequal 50x40Vendor:
Aluminium Angle Unequal 50x40 is a 6060 T5 mill-finish aluminium L-section with 50 × 40 mm unequal legs. The unequal 50 × 40 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- From $22.41
- From $22.41
- Unit price
- per
-
Aluminium Angle Equal 50x50Vendor:
Aluminium Angle Equal 50x50 is a 6060 T5 mill-finish aluminium L-section with 50 × 50 mm equal legs. The equal 50 × 50 mm legs give the same return on both sides of the 90° corner. It is stocked for general fabrication, caravan and...
- From $25.40
- From $25.40
- Unit price
- per
-
Aluminium Angle Unequal 60x25Vendor:
Aluminium Angle Unequal 60x25 is a 6060 T5 mill-finish aluminium L-section with 60 × 25 mm unequal legs. The unequal 60 × 25 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- $43.01
- $43.01
- Unit price
- per
-
Aluminium Angle Unequal 70x25Vendor:
Aluminium Angle Unequal 70x25 is a 6060 T5 mill-finish aluminium L-section with 70 × 25 mm unequal legs. The unequal 70 × 25 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- $15.73
- $15.73
- Unit price
- per
-
Aluminium Angle Equal 76x76Vendor:
Aluminium Angle Equal 76x76 is a 6060 T5 mill-finish aluminium L-section with 76 × 76 mm equal legs. The equal 76 × 76 mm legs give the same return on both sides of the 90° corner. It is stocked for general fabrication, caravan and...
- From $133.03
- From $133.03
- Unit price
- per
-
Aluminium Angle Unequal 100x50Vendor:
Aluminium Angle Unequal 100x50 is a 6060 T5 mill-finish aluminium L-section with 100 × 50 mm unequal legs. The unequal 100 × 50 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- From $56.43
- From $56.43
- Unit price
- per
-
Anodized Aluminum Balcony Drip Angle (12mm x 5m)Vendor:
B.A.T 12 mm Anodised Aluminium Balcony Drip Angle is a 5 m balcony drip edge for longer tiled or rendered balcony runs. Its drip lip projects runoff clear of the fascia, cladding or render below, helping stop water tracking back beneath the balcony edge....
- From $25.97
- From $25.97
- Unit price
- per
-
Balcony Drip Angle 90° Internal CornerVendor:
Balcony Drip Angle 90° Internal Corner is a pre-formed internal corner for the B.A.T 12 mm anodised aluminium balcony drip-angle system. It maintains the perimeter profile through a 90° inside turn without a site-made mitre. The matching component keeps the drip-edge geometry and finished...
- $25.97
- $25.97
- Unit price
- per
-
Adheseal Bucket BagVendor:
Because “throw it in the bucket” is a storage system. Technically. The Adheseal Bucket Bag turns your bucket into a proper grab-and-go tool caddy, with multiple external pockets to keep everyday trade gear organised and easy to reach. Tape measures, markers, knives, screwdrivers and...
- $16.24
- $16.24
- Unit price
- per
Frequently Asked Questions
Are Adheseal products made in Australia?
Adheseal formulates and supplies its sealants, adhesives, and waterproofing products for Australian trade conditions, with local stock through the Brisbane warehouse. Check the data sheet for cure times before you put the joint into service.
Which Adheseal silicone should I use in a shower?
S-100 kitchen and bathroom silicone. It carries mould resistance for constant damp. Use Matt Seal S350 where the job specifies a sanitary rating. Check the data sheet for cure times before you put the joint into service.
What is the difference between Hi Flex 50 and 60?
Both are MS polymer hybrid sealants with permanent flexibility. Hi Flex 60 adds higher movement capability and stronger paint compatibility for facades and panel joints.
Which adhesive grabs panels without bracing?
High Power 609 instant grab or MS 609 fast grab. Both hold lightweight panels on position immediately, so you can drop temporary supports on vertical work.
Do Adheseal primers work on non-porous surfaces?
Yes. Autoshield activator, 50A primer, and Superprime 711 key membranes and adhesives to glazed tiles, metal, and smooth concrete. Check the data sheet for cure times before you put the joint into service.