-
Megapoxy 132Vendor:
Use Megapoxy 132 for high-performance epoxy floor coating in food processing, commercial kitchens, and industrial settings. This solvent-free, low VOC coating meets AS 4020:2018 Potable Water Approval and offers 120MPa ultimate compressive strength for demanding environments.- From $195.36
- From $195.36
- Unit price
- per
-
Megapoxy MCVendor:
Use Megapoxy MC for heavy-duty, chemical-resistant coating on concrete and steel, offering 100% solids, excellent abrasion resistance, and VOC-free hygienic protection in aggressive environments. Its high bond strength (>3Mpa concrete, 13Mpa steel) ensures lasting performance where other coatings fail.
- From $173.63
- From $173.63
- Unit price
- per
-
Megapoxy MegadureVendor:
Use Megapoxy Megadure Ceramic for extreme abrasion protection and grouting high alumina ceramic tiles in heavy industrial environments. This high alumina bead epoxy paste offers rapid 2-hour initial cure (fast-set) at 25°C and robust wear resistance for critical equipment, extending service life in abrasive conditions.
- $128.51
- $128.51
- Unit price
- per
Frequently Asked Questions
Which coating suits a food factory floor?
Megapoxy 132. It is a solvent-free epoxy barrier for food and beverage areas, pharmaceutical plants, hospital kitchens, and forklift ramps. It needs shot-blasted, dry concrete and its full cure before traffic.
What protects bunds and wastewater concrete?
Megapoxy MC. It is a VOC-free epoxy maintenance coating for chemical bunds, wastewater assets, concrete, and steel. It resists spills once cured. Check chemical resistance against your actual exposure.
What is Megadure used on?
Badly worn metal and concrete. It is a high-alumina bead epoxy for mines, ball mills, slurry pumps, and processing equipment under severe abrasion. Apply it at the thickness the data sheet specifies.
Are there sealants in this range?
Today this range holds the epoxy barriers and wear linings. General silicone and hybrid sealants for factory assembly sit in the Silicone Sealants and Hybrid MS Polymer ranges, linked below.
How thick do these coatings go?
Each product sets its own build. 132 and MC go on by roller or squeegee in stated coats. Megadure is trowelled to a wear-layer depth. Do not thin them. Respect the recoat windows and cure times.
Do these coatings need a primer?
Sound, dry, blast-cleaned concrete usually needs no primer. Marginal or oily slabs may need an epoxy primer first. Follow the current Megapoxy data sheet for your substrate. Test a small area before the full application.