11
Download Product Data
For sealing exterior joints, repairing greenhouse film, and overwrapping pipework, Bond Breaker All Weather Tape provides a transparent, UV-stabilised barrier that bonds to low-energy plastics. The solvent-based acrylic adhesive forms an immediate, high-tack bond to polyethylene sheeting and PVC profiles, maintaining structural integrity under direct solar exposure without degrading or yellowing.
Where to use it
- Repairing and reinforcing ripped greenhouse films and tunnel houses
- Joining and sealing polyethylene underlay or damp-proof membranes
- Overwrapping exterior piping and securing electrical bindings
- Shatter protection and temporary surface masking on glass or sheet plastics
- General exterior waterproofing, patching, and weather-sealing
Numbers that matter
- 450% Elongation: High elasticity allows the tape to stretch and conform to shifting substrates and thermal expansion in exterior piping without tearing.
- 80°C Temperature resistance: Maintains adhesive stability and holding power on hot sun-exposed PVC frames and polytunnels.
- 0.135mm Total thickness: A robust 0.100mm polyethylene backing combined with a heavy adhesive layer resists puncturing while maintaining flexibility.
- 55N per 25mm Tensile strength: Delivers reliable mechanical strength to reinforce tears under wind load in horticultural film structures.
Application clean-up and limits
To prevent bonding failures, ensure all application surfaces are entirely clean and free from oil, dust, powder, moisture, or chemical release agents. Avoid touching the pressure-sensitive adhesive face during application, as skin oils can reduce initial tack and long-term adhesion to polyethylene and steel substrates.
Frequently Asked Questions
Can I use this tape with polyurethane sealants?
Yes, Adheseal Bond Breaker All Weather Tape is compatible with polyurethane, hybrid, and silicone sealants. It forms a non-stick base, enabling the sealant to perform as intended.
Does the tape leave residue when removed?
No, the tape is designed for clean removal without adhesive transfer, provided it is applied to clean, dry surfaces and not stretched during install.
Bond Breaker All Weather Tape Physical Properties
| Property | Value |
|---|---|
| Available Sizes | 8mm x 50mt, 15mm x 50mt |
| Packaging Options | Single Buy, Box Buy (20) |
| Application | Used in expansion joints, control joints, precast concrete, window and door installations |
| Compatibility | Silicone, Polyurethane, Hybrid Sealants |
| Weather Resistance | UV resistant, All Weather Durable |
| Removal | Clean removal, no residue |
| Colour | Clear |
- Choosing a selection results in a full page refresh.