Price Per Unit: $3.65
Price Per Box: $3.29
Needed a fast-tack, low-odour adhesive for installing carpet tiles across 300m² of office space without disrupting staff.
Multi-Tack allowed quick positioning and strong adhesion with minimal fumes – installation completed in one day with zero complaints.
Applied with 3mm notched trowel and allowed tack-off before laying – ensured full coverage and repositioning ability.
Multi-Tack is compatible with concrete, timber, vinyl, acoustic panel backings, MDF, particleboard, and primed surfaces.
Yes. Multi-Tack can be used for vertical installations such as acoustic panels or MDF wall linings, provided weight is supported during curing.
Yes. It is water-based, low-VOC, and non-toxic once cured – ideal for enclosed or sensitive areas.
Use a notched trowel, brush, or roller. Allow tack-off before bonding for best adhesion on flooring and panel installations.
Initial grab is immediate; full bond strength is typically achieved within 24–48 hours depending on material and humidity.
Application / Use Case | Key Benefit | Primary Trades |
---|---|---|
Carpet tile installation in offices and schools | Quick grab, low odour, safe for indoor use | Commercial Flooring Installers |
Acoustic panel mounting on MDF walls | Tack-off allows repositioning; bonds securely once cured | Shopfitters, Builders |
Fixing vinyl to concrete and timber subfloors | Flexible bond accommodates movement; high adhesion to porous substrates | Vinyl Layers, Interior Fit-out Teams |
Adhering MDF panels to walls in dry areas | Reduces need for mechanical fasteners; clean aesthetic | Joiners, Cabinetmakers |
DIY flooring repair or new installation | Easy to apply, non-toxic, long open time | DIY Renovators, Homeowners |
Ensure substrates are clean, dry, and free from oil, dust, or wax. Mechanically prepare smooth concrete or dusty boards for improved bond.
Use a notched trowel, roller, or brush depending on surface size and adhesive spread required.
Spread a consistent layer of Multi-Tack onto the surface. Apply only as much area as can be covered within the tack time.
Allow 5–15 minutes for tack development before placing flooring or panels, depending on temperature and humidity.
Position materials carefully and press firmly across the surface to ensure full contact and bond development.
Clean up excess adhesive and tools with water before the product cures. Once dry, mechanical removal is required.
Wear gloves and safety glasses when applying to avoid skin and eye contact.
Ensure adequate airflow during application, particularly in enclosed environments.
Store between 5°C and 30°C in a sealed container. Keep out of reach of children. Dispose of product in accordance with local waste regulations.
Refer to the Safety Data Sheet (SDS) for full safety instructions.
Ensure surface is dry and free of dust, laitance, or curing agents. Mechanically abrade for best results.
Sweep or vacuum to remove dust. Ensure substrate is sound and free from wax or sealants.
Clean thoroughly to remove plasticisers and oils. Light sanding may improve grip.
Ensure the backing is clean and dry. Test adhesion if surface is heavily textured or coated.