11
Trade quote
Custom pricing available
Tell us what you need and we'll come back with a quote.
Custom trade quote
Share your quantity and project details for a tailored quote.
Why Choose 80mm Round Megaflex Stick Down Floor Waste
Use 80mm Round Megaflex Stick Down Floor Waste for reliable wet area drainage where low-profile, membrane-bonded connections are essential.
80mm Round Megaflex Stick Down Floor Waste Common Uses
This component is selected for residential and commercial wet areas where a slim, stick-down waste integrates directly with waterproofing membranes and accommodates vinyl or tiled surfaces.
- Vinyl flooring installations requiring a secure, flexible seal at the drain.
- Tile and wet room layouts where a low-profile flange bonds to adhesive and membrane systems.
- Renovations with tight slab clearances that cannot accommodate deep floor recesses.
- Laundry and utility zones needing compliant drainage with straightforward tooling.
Where 80mm Round Megaflex Stick Down Floor Waste Performs Best
Performs reliably on non-porous, stable substrates within the specified application temperature range, where membrane integrity and accessible plumbing outlets are maintained.
Coverage, Skin Time & Cure
Yield and timing are defined by membrane coverage, outlet configuration, and tooling; site-plan to allow membrane curing before final floor installation.
- Coverage rate depends on membrane type, floor area, and outlet density.
- Skin time varies with membrane chemistry and ambient conditions.
- Cure to service load follows membrane manufacturer guidance and local practice.
Surface Prep & Application
Prepare a sound, clean substrate and apply a compatible waterproofing membrane; install using tooling that seats the ABS flange without distorting the bond line.
- Clean and prime the substrate to ensure membrane adhesion.
- Position the waste outlet to align with the plumbing pipe.
- Bond the ABS Megaflex flange directly to the membrane using approved methods.
- Secure the connection to the pipe with appropriate fittings per plumbing code.
Best Practices for Using 80mm Round Megaflex Stick Down Floor Waste
Integrate the system with compatible primers and membranes to maintain watertight integrity and regulatory compliance across residential and commercial drainage assemblies.
- Use a waterproofing membrane designed for wet area applications.
- Select the correct outlet size (50 or 80 mm) to match the plumbing outlet.
- Employ specific plumbing tools for outlet connection and sealing.
- Verify compliance with WaterMark, AS/NZS 3500, and ISO 9001 requirements.
Handling & Storage
Handle with appropriate PPE in well-ventilated conditions; store in a dry, shaded environment to preserve material integrity and finish.
- Store between 5 to 25°C away from direct sunlight.
- Use chrome-plated brass components as specified to limit corrosion risk.
- Follow safe disposal practices in accordance with local regulations.
- Avoid exposure to temperatures above 60°C to prevent thermal deformation.
Frequently Asked Questions About 80mm Round Megaflex™ Stick Down Floor Waste
Q: How is this floor waste installed?
A: It is designed for stick-down installation. The ABS Megaflex™ flange allows for direct bonding to waterproofing membranes, ensuring a watertight seal and low-profile fit.
Q: How durable is the solid brass grate?
A: The solid brass grate provides exceptional corrosion resistance, even in high-moisture environments, making it ideal for long-term use in Australian conditions.
Q: Is this product compatible with vinyl flooring?
A: Yes, the low-profile flange is suitable for use with vinyl, tile, and other common wet area flooring materials, provided proper bonding and sealing are achieved.
Q: What if the flange does not adhere properly?
A: Ensure surfaces are clean and dry. Use a compatible primer or adhesive to improve bond strength. If failure persists, reapply with proper surface preparation.
Q: Is this product recyclable after use?
A: Brass components are recyclable. ABS plastic is also recyclable where facilities exist. Dispose of according to local waste regulations.
Use 80mm Round Megaflex™ Stick Down Floor Waste for:
- Residential and commercial bathroom drainage
- Laundry and wet room waste systems
- Low-profile installations in renovations or new builds
Why Use 80mm Round Megaflex™ Stick Down Floor Waste:
- Provides reliable waterproofing with stick-down flange
- Ensures long-lasting performance with brass grate
- Streamlines installation with low-profile design
How to apply 80mm Round Megaflex™ Stick Down Floor Waste:
- Clean and dry the substrate thoroughly.
- Apply compatible waterproofing membrane around the outlet area.
- Press Megaflex™ flange into position, ensuring full contact with membrane.
- Secure connection to pipe using appropriate fittings.
- Install solid brass grate and seal edges if required.
80mm Round Megaflex™ Stick Down Floor Waste limitations:
- Not suitable for use in areas without waterproofing membrane
- Must not be exposed to temperatures above 60°C (140°F)
Safety precautions when using 80mm Round Megaflex™ Stick Down Floor Waste:
- Personal Protective Equipment: Gloves and eye protection
- Ventilation: Ensure adequate ventilation when applying adhesives
- Handling: Avoid rough handling to prevent flange damage
80mm Round Megaflex™ Stick Down Floor Waste can be used on the following substrates:
- Cement screed – ensure surface is primed for adhesion
- Tile bedding – compatible with adhesive and waterproofing layers
- Vinyl flooring – secure seal with flexible membrane
- Choosing a selection results in a full page refresh.