11
Why Choose 100mm Brass Round Push In PVC Grate
Use 100mm Brass Round Push In PVC Grate for reliable floor drainage in wet areas where a solid brass core and a chrome plated finish are required. The friction push-in installation method and 100 mm outlet diameter align with standard PVC internal dimensions, while the 110 mm flange covers rough pipe edges to support code compliant installation under ASTM D1192-2004.
100mm Brass Round Push In PVC Grate Common Uses
This component is selected on commercial showers and similar high-density wet environments where corrosion resistance and a clean, professional appearance are critical.
- Large-scale projects where rapid, tool-free deployment reduces installation time.
- Locations with visible rough pipe edges where the 110 mm wide flange conceals substrate imperfections.
- Applications demanding guaranteed compliance for mandatory building inspections.
Where 100mm Brass Round Push In PVC Grate Performs Best
Performs reliably on level substrates with standard 100 mm internal dimension PVC pipe, in environments where wet conditions and routine cleaning expose components to harsh chemicals.
Coverage, Skin Time & Cure
Yield and site-planning guidance based on the friction push-in design for standard PVC pipe.
- Single unit coverage per standard 100 mm outlet.
- Skin time is immediate due to tool-free seating, allowing adjacent work to proceed without delay.
- Cure is not applicable; the system relies on mechanical fit rather than chemical set.
Surface Prep & Application
Prepare the substrate and pipe ends to ensure the 110 mm flange sits flush and the flow path remains unobstructed.
- Verify the outlet is a standard 100 mm internal dimension PVC pipe and is free of debris.
- Ensure the substrate is level so the flange rests evenly without gap.
- Align the pipe and the grate, then push firmly into place until the flange contacts the surrounding surface.
- Check for secure fit and unobstructed drainage flow.
Best Practices for Using 100mm Brass Round Push In PVC Grate
Integrate with compatible floor waste models and confirm substrate conditions to maintain long-term performance and inspection compliance.
- Use with vinyl floor waste models where applicable.
- Confirm substrate is level for flush flange installation on concrete subfloors.
- Employ as part of an embedded drainage system suitable for concrete slabs.
- Avoid abrasive cleaners that may tarnish the chrome plated finish.
Handling & Storage
Handle with standard PPE and store in conditions that protect the solid brass core and chrome plated surface.
- Wear appropriate PPE during handling.
- Store in a dry environment to minimise exposure to corrosive agents.
- Protect the chrome plated finish from abrasive contact during transport.
- Dispose of in accordance with local regulations for metal waste.
Frequently asked questions
How do I install this floor waste?
The push-in design allows for direct installation without tools. Align it with the outlet and apply pressure for a snug and secure fit.
Does this floor waste meet Australian standards?
Yes, this floor waste is compliant with AS/NZS 1192-2004 and is Watermarked. This ensures suitability for Australian plumbing installations and inspections.
Is the chrome finish durable in wet areas?
Yes, the chrome plating is designed for wet conditions. It provides corrosion resistance, maintaining its finish under regular use in bathrooms and laundries.
Is it compatible with all 100mm outlets?
It is designed for standard 100mm outlets. Always verify your specific outlet dimensions to confirm compatibility for a proper, secure fit.
What if the floor waste does not sit flush?
Check for any debris or uneven edges around the outlet. Ensure the pipe is properly aligned and level to allow the floor waste to seat correctly and securely.
Applications and benefits
| Application | Key benefit | Primary trades |
|---|---|---|
| Residential bathroom floor drainage | Complies with AS/NZS 1192-2004 and Watermark, ensuring code-compliant, reliable wastewater removal. | Plumbers, Builders, Tilers |
| Commercial laundry room drainage | Solid brass body with chrome plate finish offers corrosion resistance and maintains appearance in high-use wet environments. | Plumbers, Builders |
| Shower floors requiring compliant waste solutions | Push-in installation saves time and effort on site by eliminating the need for tools, speeding up project completion. | Plumbers, Tilers |
How to apply 100mm Round Push In Chrome Plate Brass Floor Waste:
- Clean the outlet pipe and surrounding floor area
- Align the floor waste with the outlet
- Push the unit firmly into the outlet until flush
- Check for secure fit and proper drainage flow
Product limitations
- Not for: Outlets smaller than 100mm. It requires a precise 100mm fit for proper function.
- Compatibility: May not fit non-standard outlet sizes without modifications to the pipework, which is not recommended.
- Chemical exposure: The chrome finish may tarnish if exposed to harsh cleaning chemicals. Use mild, pH-neutral cleaners only.
Safety and handling
Personal protective equipment
Wear gloves to protect hands during handling and installation.
Ventilation
Not required for installation.
First aid
- Handling: Avoid dropping the floor waste to prevent damage to the chrome finish.
- Site safety: Ensure the surrounding area is dry during installation to prevent slips or accidental movement.
Storage and disposal
Store in original packaging in a dry area to protect the finish. Dispose of packaging in accordance with local regulations.
Substrate guide
Proper substrate preparation is essential to ensure a correct fit and long-term performance of the floor waste.
Ceramic tile floors
Surface prep: Ensure the tiled surface around the outlet is level and free from any grout or adhesive build-up that could impede a flush fit.
Primer: Not required for installation directly into the outlet.
Concrete subfloors
Surface prep: Ensure the embedded drainage system outlet is clear of debris and level with the finished floor surface. Verify the 100mm outlet diameter is clean and unobstructed.
Primer: Not required for installation directly into the outlet.
100mm Brass Round Push In PVC Grate Physical Properties
| Property | Value |
|---|---|
| Material | Solid Brass |
| Finish | Chrome Plate |
| Diameter | 110mm |
| Outlet Size | 100mm |
| Installation Method | Push In |
| Compliance | AS/NZS 1192-2004 |
| Certifications | Watermarked |
| Packaging Quantity | 20 per carton |
- Choosing a selection results in a full page refresh.