-
Mapei Mapesil AC - White 100Vendor:
Mapesil AC is a flexible acetic-cure silicone sealant for finishing the joints that cement grout cannot reliably accommodate: corners, perimeters and changes of plane in suitable tiled areas. Its grout-coordinated colour range helps the finished shower, bathroom or kitchen look considered rather than patched...- From $175.80
- From $175.80
- Unit price
- per
-
White 100
-
Vanilla 131
-
Jasmine 130
-
Moon White 103
-
MapePUR Universal Foam M/GVendor:
MapePUR Universal Foam M/G is a self-expanding polyurethane foam for filling and insulating suitable gaps in building work. When a door frame has been fitted or a service passes through a wall, irregular voids can remain that are difficult to fill neatly with rigid...
- From $16.38
- From $16.38
- Unit price
- per
-
FulaSeal Pro 840NS Non-Skinning MasticVendor:H.B FullerFor cool room construction, refrigerated container components, and insulation panel installations, FulasealPro 840NS Sealant is a non-skinning, butyl-based sealant that creates a permanently plastic, moisture-resistant barrier. Formulated to remain wet and sticky inside concealed lap joints, it seals sandwich panels, Alucobond, and metal substrates...
- From $9.80
- From $9.80
- Unit price
- per
-
Ductmate PROseal® Water-Based Duct SealantVendor:DuctmateDuctmate Proseal is a water-based duct sealant for metal duct joints. It seals low, medium and high-pressure HVAC systems against air leakage, including systems up to 15 inches water gauge. How it works Proseal is a synthetic latex compound. Brush it onto clean joints...
- $29.99
- $29.99
- Unit price
- per
Frequently Asked Questions
How do I choose the right sealant?
It depends on the job. Silicone suits glass, glazing, and wet areas but cannot be painted. Polyurethane handles high-movement joints and accepts paint. MS polymer gives you both paintability and weathering resistance without primer. Acrylic suits non-movement gaps.
What sealant do I use for a shower or bathroom?
Use a sanitary silicone sealant with fungicide for mould resistance. Sanitary silicone handles the moisture, steam, and cleaning chemicals in wet areas. It is not rated for permanent water immersion or swimming pools.
Can I paint over the sealant after it cures?
Silicone sealants do not accept paint. Polyurethane and MS polymer sealants accept acrylic, oil, and rubber-based paints once cured. Wait at least seven days before painting and test on a small area. Non-flexible paints may crack on moving joints.
What does movement capability mean for sealants?
Movement capability is the percentage a sealant can stretch and compress as the building moves. Standard sealants handle ±25%. High-movement grades reach ±50% or more. Choose a sealant with enough movement rating for the joint width and thermal range.
Do I need to prime before applying sealant?
MS polymer sealants adhere to most substrates without primer. Silicone sealants need a primer on some non-porous surfaces. Polyurethane sealants often need a primer on porous or dusty substrates. Always check the product data sheet for the specific primer requirement.