Q: Can Waterstop Doorline be installed over a tiled floor?
A: No, Waterstop Doorline is designed to be installed prior to tiling. It integrates with the screed and waterproofing membrane beneath the tiles, ensuring a watertight and flush finish at the wet area entry.
Q: Is a primer needed before bonding Doorline to the substrate?
A: In most cases, no primer is needed. The serrated base enhances adhesive contact on standard screeds. However, ensure the substrate is clean, dry, and free from dust or contaminants for optimal adhesion.
Q: How do I cut Doorline to length on site?
A: Waterstop Doorline can be trimmed using a standard hacksaw. For a clean finish, use a fine-tooth blade and de-burr the cut edges prior to installation to prevent damage to membranes or finishes.
Q: Does Doorline need to be installed before waterproofing?
A: Yes, Doorline must be installed prior to waterproofing. The vertical serrated leg is designed for membrane adhesion, which is a critical part of the system to ensure watertight performance.
Q: What’s the difference between the 40mm and 50mm Doorline options?
A: The height difference allows flexibility based on screed depth or desired step profile. 40mm suits standard applications, while 50mm provides additional coverage for thicker screeds or elevated transitions.
Application / Use Case | Key Benefit | Primary Trades |
---|---|---|
Wet area entry transition in bathrooms | Provides a safe, stylish sill profile with built-in waterproofing compatibility | Builders, Waterproofers |
Matching extrusion for Waterstop Streamline showers | Creates a cohesive visual line around the wet area perimeter | Bathroom Designers, Renovators |
Screeded or bedded floor installations | Easily integrates into common wet area substrates with strong adhesion | Tilers, Waterproofers |
Onsite trim-to-fit installation | Minimises waste and allows real-time jobsite adjustments | General Contractors |
The Engineering Challenge: Maintaining membrane continuity while achieving a clean tile finish at the bathroom threshold.
The System-Based Solution with Waterstop Doorline: The serrated vertical leg anchors the membrane, while the bullnose face aligns with tile edges for a consistent visual line and waterproof barrier.
Best Practice Note: Apply waterproofing to the vertical leg before setting floor tiles to avoid membrane bridging gaps.
The Engineering Challenge: Membranes pulling away from door thresholds over time due to poor mechanical grip.
The System-Based Solution with Waterstop Doorline: Serrated faces enhance mechanical interlock, giving superior anchorage for both liquid and sheet-applied membranes.
Best Practice Note: Apply membrane in multiple coats or with reinforcing mesh over the serrations to maximise hold.