-
Sikalastic®-1K MortarVendor:
Use Sikalastic-1K for flexible waterproofing and concrete protection. It provides crack-bridging ability up to 0.75 mm and resists negative pressure up to 2.5 bar for 72 hours, offering certified performance for drinking water contact and external membranes.- $213.07
- $213.07
- Unit price
- per
-
Duram 195Vendor:
Use Duram 195 as a Class III elastomeric waterproofing membrane for non-exposed areas, providing 400% elongation and Green Star compliant low VOCs. It requires a dry substrate and must be covered or top-coated with Multithane ATC for UV exposure.- $319.58
- $319.58
- Unit price
- per
-
RLA Universal PrimerVendor:RLAUse RLA Universal Primer to manage suction on porous concrete or promote adhesion on non-porous surfaces like tiles. This water-based acrylic primer dries tack-free in 30-60 minutes, preventing bond failures before tiling or levelling.
- From $121.14
- From $121.14
- Unit price
- per
-
Duram Azcothane ReoVendor:
Use Duram Azcothane Reo for protected wet area and balcony waterproofing where AS 4858 compliance is required. Its internal microfibre reinforcement provides 311% elongation and passes cyclic movement tests, allowing for direct stick tiling without external fabric in most cases.
- $167.05
- $167.05
- Unit price
- per
-
Duram S900Vendor:
Use Duram S900 for invisible, sub-surface weatherproofing of porous mineral substrates like concrete and sandstone. Its siloxane chemistry allows vapour diffusion while preventing water ingress and efflorescence, curing fully in 12-24 hours.
- $254.95
- $254.95
- Unit price
- per
-
GCP Epocote F100W Clear Epoxy PrimerVendor:
GCP Epocote F100W is a clear, two-pack, water-based epoxy primer and sealer. Designed for priming damp or green concrete, it offers an exceptionally long pot-life and fast cure, ensuring a tough, chemically resistant bond for professional waterproofing membrane systems.- From $445.10
- From $445.10
- Unit price
- per
-
Adheseal EP Waterproofing SystemVendor:
Penetrating, non-film forming polyester-polymer treatment that waterproofs and hardens concrete, brick, render and most masonry from within. Spray applied at ~5–7 m²/L, passes negative hydrostatic pressure to 60 psi, paintable once dry.- From $150.00
- From $150.00
- Unit price
- per
-
Everflex Polyurethane SupaprimeVendor:
Use Everflex Supaprime to ensure robust adhesion for Adheseal sealants and membranes on porous substrates like concrete and timber. Its rapid cure and deep penetration prevent costly delamination, providing a reliable bond for critical applications.
- $59.51
- $59.51
- Unit price
- per
-
Fatrabond 1214 Roller Applied Polyurethane Adhesive 20LVendor:FatraUse Fatrabond 1214 for roller-applied bonding of Fatrafol felt-backed roof membranes, delivering rapid hardening and preventing blistering with its solvent-free MCPU formulation.
- $936.00
- $936.00
- Unit price
- per
-
Fibreglass Reinforcing Mat 225gsmVendor:
Use Fibreglass Reinforcing Mat 225gsm for reinforcing corners and joints in waterproofing applications. Its 225gsm weight provides balanced strength and flexibility to prevent cracking and water intrusion at critical stress points.
- From $39.75
- From $39.75
- Unit price
- per
-
Gripset 51 MembraneVendor:
Use Gripset 51 for flexible, solvent-free waterproofing of underground and external structures. Its >500% elongation bridges cracks, providing robust protection against water, rot, and corrosion in continuously damp environments.- From $71.51
- From $71.51
- Unit price
- per
-
Megapoxy HXVendor:
Use Megapoxy HX for deep penetration into fine concrete cracks or porous substrates. Its extra low 200 cps viscosity ensures full repair, delivering a 140 MPa compressive strength with a 60-minute work time.- From $203.94
- From $203.94
- Unit price
- per
-
Megapoxy MCVendor:
Use Megapoxy MC for heavy-duty, chemical-resistant coating on concrete and steel, offering 100% solids, excellent abrasion resistance, and VOC-free hygienic protection in aggressive environments. Its high bond strength (>3Mpa concrete, 13Mpa steel) ensures lasting performance where other coatings fail.
- From $173.63
- From $173.63
- Unit price
- per
-
Pasco AquastopVendor:
Use Pasco Aquastop for waterproofing non-moving concrete construction joints and penetrations. It expands up to 300%, withstands over 70m hydrostatic head, and remains active and self-healing in potable water.- From $69.70
- From $69.70
- Unit price
- per
-
Mapei Primer GVendor:
Use Mapei Primer G for critical substrate preparation, ensuring stable adhesion and preventing common failures like ettringite formation between gypsum and cement-based materials. It offers EC1 Plus low VOC emissions and fast drying.- From $57.91
- From $57.91
- Unit price
- per
-
RLA Moisture Seal PrimerVendor:RLAUse RLA Moisture Seal as a high-performance 2-part epoxy barrier against moisture and vapour. It withstands 2.5 bar of hydrostatic pressure and can be applied to damp or "green" concrete, preventing moisture-related failures under overlaid finishes.
- $459.03
- $459.03
- Unit price
- per
-
Silcor 575 MembraneVendor:
Use SILCOR 575 LB for Class III compliant waterproofing on horizontal balconies, green roofs, and internal wet areas. Its 800%+ elongation and seamless application prevent callbacks from movement or joints.
- $316.77
- $316.77
- Unit price
- per
-
Silcor 580 MembraneVendor:
Use SILCOR 580 for certified heavy-duty trafficable waterproofing on car parks, balconies, and internal wet areas. This two-part polyurethane delivers over 700% elongation and 7MPa tensile strength, ensuring crack bridging and long-term performance under demanding conditions.
- $659.77
- $659.77
- Unit price
- per
-
Silcor Primer BSVendor:
Use SILCOR Primer BS for reliable adhesion of SILCOR polyurethane membranes to most rigid construction substrates. Its fast-drying (30-60 min) modified polyurethane resin ensures a strong bond and water resistance, critical for weather-interrupted jobs.
- $282.35
- $282.35
- Unit price
- per
-
-
Adheseal Showerseal SealerVendor:
Use Adheseal Showerseal for economic, long-term leak prevention in tiled wet areas and external porous surfaces. It penetrates to create a hydrophobic barrier, stops water ingress without changing appearance, and allows the substrate to breathe.
- $65.00
- $65.00
- Unit price
- per
-
30mm HexCell Wall Drainage Cell - Standard Duty 550Vendor:Drainage CellUse 30mm HexCell Drainage Cell for relieving hydrostatic pressure and protecting waterproofing on green roofs, podiums, and retaining walls. It provides 70 t/m² compressive strength and a 14,400 L/h/m² flow rate, ensuring robust and efficient sub-surface drainage.
- $38.46
- $38.46
- Unit price
- per
-
100mm Brass Square Push Into PVC GrateVendor:ART AustraliaUse the 100mm Brass Square Push Into PVC Grate for compliant, durable drainage in wet areas. Its solid brass construction and push-fit design ensure a long-lasting, AS/NZS 3500 certified finish.
- From $19.00
- From $19.00
- Unit price
- per
-
Leister UNIDRIVE 500 Semi-Automatic Welding MachineVendor:LeisterUse the Leister UNIDRIVE 500 for consistent, high-speed welding of thermoplastic membranes on roofs and for critical detailing. Its digital control and 4.5 m/min speed prevent seam failure and increase productivity over manual methods.
- $10,179.60
- $10,179.60
- Unit price
- per
-
Adheseal Matt Seal S-250 Sanitary SIlicone SealantVendor:
Use Adheseal Matt Seal S-250 for flexible, mould-resistant joint sealing in wet areas like showers or kitchens. Its neutral cure prevents corrosion on metals like galvanised steel, and it accommodates ±30% joint movement.
- From $6.86
$0.00- From $6.86
- Unit price
- per
-
Wondercap RetroFit KitVendor:WondercapUse Wondercap RetroFit Kit to seal existing floor waste penetrations during renovation. This polymer kit ensures a watertight seal and stops sewer gas odours, preventing costly demolition.
- From $25.08
- From $25.08
- Unit price
- per
-
Mapei Keracolor FF Bioblock GroutVendor:
Use Mapei Keracolor FF Bioblock for grouting tile joints up to 6mm, especially in wet or high-traffic areas. Its CG2WA classification confirms high abrasion resistance and low water absorption, preventing mould and ensuring a durable finish.
- From $15.33
$19.17- From $15.33
- Unit price
- per
-
Megapoxy HICBVendor:
Use Megapoxy HICB for heavy-duty backing and grouting in crushers and mills. Its 115 MPa compressive strength and 20 MPa steel bond provide critical impact and structural reinforcement, preventing movement and extending equipment life where standard grouts fail.
- $148.06
- $148.06
- Unit price
- per
-
Mapei Kerapoxy AdhesiveVendor:
Use Kerapoxy Adhesive for demanding tile and stone installations where strength and chemical resistance are critical. Its R2T classification provides no vertical slip and excellent long-term bond, preventing failures in pools and external areas.
- $181.98
- $181.98
- Unit price
- per
-
Mapesil AC Silicone SealantVendor:
Use Mapesil AC for elastic, mould-resistant sealing of expansion joints in wet areas and general construction, offering ±25% movement and 40 colour options for a professional, durable finish.
- From $172.56
- From $172.56
- Unit price
- per
-
Adheseal N40 Silicone Sealant Aluminium GreyVendor:
Use Adheseal N40 Silicone for flexible, anti-fungal sealing in wet areas and high-movement joints. Its neutral cure prevents corrosion on metals like Zincalume, a key differentiator over acid-cure alternatives.
- From $6.94
- From $6.94
- Unit price
- per
-
Silicone Colour Sample ChartVendor:
Adheseal Silicone Colour Sample Chart
- $0.00
$0.00- $0.00
- Unit price
- per
-
Gripset C-Rubber Tile AdhesiveVendor:
Use Gripset C-Rubber for demanding internal and external tiling jobs, including wet areas, where C2TES1 performance is required. Its flexible, non-slump formulation and respirable silica free composition provide a reliable and safer installation.
- $43.31
- $43.31
- Unit price
- per
-
Lauxes Grates NeXT Generation NXT35 Linear Drain KitVendor:
Use Lauxes Grates NeXT Generation NXT35 for heavy-duty linear drainage in outdoor areas. With a 10.3 tonne load rating and a lifetime rustproof warranty on its anodised aluminium, it handles vehicle traffic and coastal conditions while preventing water tracking.- From $14.99
- From $14.99
- Unit price
- per
-
100mm CP Clearout Square GrateVendor:ART AustraliaUse 100mm CP Clearout Square Grate for compliant and secure wet area drainage. Its solid brass construction and Megaflex™ base ensure durability and a reliable friction fit, meeting WaterMark and AS 3740 standards.
- From $30.33
- From $30.33
- Unit price
- per
-
Lauxes Grates NeXT Generation NXT26 Linear Drain KitVendor:
Use Lauxes Grates NeXT Generation NXT26 Linear Drain Kit for reliable indoor and outdoor water management. Its anodised aluminium construction ensures a Lifetime Rustproof Warranty, a 25-Year UV Warranty, and integrated anti-tracking technology for superior sub-tile leak prevention.
- From $14.99
- From $14.99
- Unit price
- per
-
Lauxes Grates Slimline Tile Insert 26 Grate KitVendor:
Lauxes Grates Slimline Tile Insert 26 Grate Kit with 5600mm max length, rustproof and UV-stable. Supports 11mm tiles, cut-to-fit, and easy waste outlet placement.
- From $14.99
- From $14.99
- Unit price
- per
-
MapePUR Universal Foam M/GVendor:
Use MapePUR Universal Foam M/G for critical thermal and acoustic gap filling around windows, doors, and pipes. It offers 58 dB soundproofing and cures quickly, allowing cutting within 25-30 minutes.
- From $22.20
- From $22.20
- Unit price
- per
-
Gripset 11Y AdmixtureVendor:
Use Gripset 11Y to enhance cement-based compounds for demanding conditions, providing superior adhesion and water resistance for screeds, renders, and repair mortars in continuous immersion or freeze/thaw environments.
- From $99.49
- From $99.49
- Unit price
- per
-
Megapoxy Pigment PasteVendor:
Use Megapoxy Pigment Paste for tinting epoxy systems, ensuring durable and consistent colour. This low VOC, epoxy-compatible paste avoids compromising the resin's final performance, reducing the risk of rework.
- $51.10
- $51.10
- Unit price
- per
-
Megapoxy 254Vendor:
Use Megapoxy 254 for high-strength structural bonding and repairs on concrete, metal, and natural stone. It delivers 70 MPa compressive strength, ensures a non-staining finish on sensitive materials, and cures in cold, damp conditions, reducing callbacks from bond failure.
- $596.35
- $596.35
- Unit price
- per
-
Sikasil Pool Silicone SealantVendor:
Use Sikasil Pool for high-performance sealing of joints in swimming pools and permanently wet areas. It offers excellent resistance to chlorine and fungal attack, with ±25% movement capability, preventing common failures in aquatic environments.
- From $312.00
- From $312.00
- Unit price
- per
-
Gripset C-Lite Tile AdhesiveVendor:
Use Gripset C-Lite for critical tiling jobs that demand durability and flexibility, such as immersed areas, large format tiles, and underfloor heating. Its C2TES2 classification ensures high bond strength and deformability in challenging conditions.
- $45.47
- $45.47
- Unit price
- per
-
Lauxes Grates TCT Hole Saws For Pop Waste OutletVendor:
Use Lauxes Grates TCT Hole Saws for precise, burr-free holes in aluminium Lauxes grates. TCT teeth provide up to 10x longer life than standard bi-metal saws and come as a complete unit with a pilot drill for immediate use on site.
- From $36.67
- From $36.67
- Unit price
- per
-
Gripset C-Mastic Tile AdhesiveVendor:
Use Gripset C-Mastic for high-performance tiling applications, delivering C2S1TE classified bond strength, non-slump characteristics for large format tiles, and a respirable silica-free formulation.
- $35.64
- $35.64
- Unit price
- per
-
100mm Brass Round Push In PVC GrateVendor:ART AustraliaUse for compliant drainage in wet areas with a quick, tool-free push-in installation. Its solid brass core and chrome plate finish ensure durability and AS/NZS 1192-2004 compliance.
- From $20.37
- From $20.37
- Unit price
- per
-
Plastic AngleVendor:
This versatile plastic angle is a durable and lightweight solution for a variety of applications.
- $18.67
- $18.67
- Unit price
- per
-
Lauxes Grates Pop Waste OutletsVendor:
Use Lauxes Grates Pop Waste Outlets for connecting linear grates to waste lines. The anodised aluminium construction ensures a lifetime rustproof performance in wet areas, compatible with 40mm, 50mm, 72mm, and 80mm PVC pipework.
- $11.67
- $11.67
- Unit price
- per
-
Waterstop DoorlineVendor:Waterstop StreamlineUse Waterstop Doorline for AS/NZS 3740 compliant wet area transitions. Its serrated aluminium profile integrates directly with screed and waterproofing, preventing membrane delamination.
- From $21.00
- From $21.00
- Unit price
- per
-
Waterstop Streamline Straight Lengths (1 Leg)Vendor:Waterstop StreamlineUse Waterstop Streamline Straight Lengths to create AS 3740 compliant, hob-free shower entries. It integrates waterproofing with screen support for tile systems from 6 mm to 10 mm.
- From $98.77
- From $98.77
- Unit price
- per
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
What's Popular
Vendor:
Use Adheseal PU15 for flexible, durable sealing of movement and connection joints up to ±30% and as an adhesive, offering excellent adhesion and weather resistance for confident, long-term performance.
- From $11.99
- From $11.99
- Unit price
- / per
Vendor:
Use Adheseal PU25FC for flexible sealing and bonding of movement joints in construction, marine, and manufacturing. It offers ±25% movement, fast curing at 3mm per day, AS/NZS 4020 potable water suitability, and is UV stable.
- From $11.12
- From $11.12
- Unit price
- / per
Vendor:
Use Adheseal PU50FC for high-strength, flexible structural bonding and demanding sealing jobs. It offers Shore A 45 hardness for anti-pick applications, withstands +/- 25% joint movement, and cures at 3mm per 24 hours.
- From $14.96
- From $14.96
- Unit price
- / per
Waterproofing Materials
Wet areas, balconies, rooftops, retaining walls, planter boxes — this range covers the waterproofing membranes and sealants that keep water where it belongs on Australian sites. Class III elastomeric membranes tested to AS 4858 and AS 4654.1 sit alongside polyurethane and MS polymer sealants rated for ±25–50% movement, so you...
Wet areas, balconies, rooftops, retaining walls, planter boxes — this range covers the waterproofing membranes and sealants that keep water where it belongs on Australian sites. Class III elastomeric membranes tested to AS 4858 and AS 4654.1 sit alongside polyurethane and MS polymer sealants rated for ±25–50% movement, so you can match the product to the substrate, exposure, and curing window your job demands.
From rapid-cure membranes that let you tile in four hours to UV-stable trafficable coatings and potable-water certified sealants, every product in this range is selected for predictable performance on concrete, blockwork, timber, aluminium and ceramics — without primer in most cases.
Sidebar
BY ENVIRONMENT
BY PACKAGING
BY SUBSTRATE
BY APPLICATION
BY HANDLING NOTES
Frequently Asked Questions
Translation missing: en.t:sections.general.no_content
Recently Viewed Products
- Choosing a selection results in a full page refresh.